Moxa Technologies CN2600 Series Manuals

P/N: 1802026000217 *1802026000217* CN2600 Series Quick Installation Guide Edition 6.1, November 2018 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-5258-5505 Moxa Europe: Tel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa Asia-Pacific: Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Moxa India: Tel: +91-80-4172-9088 Fax: +91-80-4132-1045  2018 Moxa Inc. All rights reserved.

– 1 – – 2 – – 3 – P/N: 1802026000021 CN2600 Series Quick Installation Guide Second Edition, November 2010 1. Overview The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS-232 or RS-232/422/485 ports and dual 10/100 Mbps Ethernet LAN ports, and some models come with dual AC power inputs. The CN2600 terminal servers are used to connect terminals, modems, printers, and other serial devices to LAN hosts, and all models comply with TCP/IP and IEEE802.3 specifications using standard twisted pair 10/100BaseTX cable as the transmission medium. 2. CN2600 series Models Model Name Description CN2610-8 8 RS-232 ports with RJ45 connectors, 100-240 VAC input. CN2610-8-2AC 8 RS-232 ports with RJ45 connectors, 2 100-240 VAC input. CN2610-16 16 RS-232 ports with RJ45 connectors, 100-240 VAC power input CN2610-16-2AC 16 RS-232 ports with RJ45 connectors, 2 100-240 VAC power input CN2650-8 8 RS-232/422/485 ports with RJ45 connectors, 100-240 VAC power inputs CN2650-8-2AC- T Dual-LAN, dual-AC-power terminal server with 8 RS-232/422/485 ports, -40 to 75°C operating temperature CN2650-8-2AC 8 RS-232/422/485 ports with RJ45 connectors, 100-240 VAC power inputs CN2650-16 16 RS-232/422/485 ports with RJ45 connectors, 100-240 VAC power inputs CN2650-16-2AC -T Dual-LAN, dual-AC-power terminal server with 16 RS-232/422/485 ports, -40 to 75°C operating temperature CN2650-16-2AC 16 RS-232/422/485 ports with RJ45 connectors, 2 100-240 VAC power inputs CN2650I-8 8 RS-232/422/485 ports with DB9-M connectors and 2 KV isolation protection, 100-240 VAC power input CN2650I-8-2AC 8 RS-232/422/485 ports with DB9-M connectors and 2 KV isolation protection, 2 100-240 VAC power input CN2650I-16 16 RS-232/422/485 ports with DB9-M connectors and 2 KV isolation protection, 100-240 VAC power inputs CN2650I-16-2AC 16 RS-232/422/485 ports with DB9-M connectors and 2 KV isolation protection, 2 100-240 VAC power inputs 3. Package Checklist The CN2600 dual-LAN terminal server products are shipped with the following items: • 1 CN2600 series Terminal Server • Power cord (AC models only)* • Document and & Software CD-ROM • Quick Installation Guide (this guide) • 1 DB9 serial cable (CBL-RJ45F9-150) • 1 DB25 serial cable (CBL-RJ45M25-150) * Power cords are available with US, Euro, UK, and JP plugs. Optional Accessories • CBL-RJ45M9-150: RJ45 (8-pin) to DB9 (male) cable, 150 cm • CBL-RJ45F9-150: RJ45 (8-pin) to DB25 (female) cable, 150 cm • CBL-RJ45M25-150: RJ45 (8-pin) to DB25 (male) cable, 150 cm • CBL-RJ45F25-150: RJ45 (8-pin) to DB25 (female) cable, 150 cm NOTE Notify your sales representative if any of the above items are missing or damaged. 4. Hardware Introduction NOTE The wide temperature model does not support the LCM Display panel or push buttons. The LCM description below applies only to standard temperature models. Front Panel LED Color Description Reset None Press the Reset button for 5 seconds to load factory defaults. The CN2600 will beep twice when the configuration has been reset. Ready Red Used for configuring the IP address and other parameters. Green Lights up when the CN2600 system is ready. Serial Tx Green Flashes to indicate serial port transmission. Serial Rx Yellow Flashes to indicate serial port reception. Rear Panel Connector Function AC Power Input Automatic detection of 100-240V, 47-63 Hz AC power supply. Power On/Off Switch I indicates power on; O indicates power off. RS-232 Console Port One RJ45 connector for console terminal connection. LAN1 Auto detecting 10/100 Mbps port. LAN2 Auto detecting 10/100 Mbps port. Serial Ports 8 or 16 RJ45 or DB9 connectors for DCE (modem) connections. LCM Display We recommend using the LCM display and four push buttons to configure the IP address for the first time. Basic Operation If the CN2600 is working properly, the LCM panel will display a green color. The red Ready LED will also light up, indicating that the CN2600 is receiving power. After the red Ready LED turns to green, you will see a display similar to the following: (Example) C N 2 6 1 0 - 1 6 _ 3 1 9 2 . 1 6 8 . 1 2 7 . 2 5 4 CN2610-16: The CN2610’s name 03: The CN2610’s serial number 192.168.127.254: The CN2610’s IP address There are four push buttons on the CN2600 nameplate. Going from left to right, the buttons are: Button Name Action MENU menu Activates the main menu, or returns to an upper level. up cursor Scrolls up through a list of items shown on the LCM panel’s second line.

CN2600 Series Dual-LAN Terminal Server User’s Manual Ninth Edition, September 2014 www.moxa.com/product © 2014 Moxa Inc. All rights reserved. CN2600 Series Dual-LAN Terminal Server User’s Manual