Moxa Technologies CN2610 series Manuals

CN2600 Series Dual-LAN Terminal Server User’s Manual Ninth Edition, September 2014 www.moxa.com/product © 2014 Moxa Inc. All rights reserved. CN2600 Series Dual-LAN Terminal Server User’s Manual

CN2610 Series Quick Installation Guide Second Edition, May 2004 LED Color Description Reset None If you forget the password, press this button for 5 seconds, then the system will be returned to factory default. Use tools with sharp end to press Reset button continuously. The Ready LED will keep blinking when your press the Reset button. After releasing the Reset button, you will hear Bi-Bi sound, meaning the default settings are restored and CN2610 has rebooted. Ready Red Displays CN2610 system is powered on Ready Green Displays CN2610 system is ready Serial Tx Green Displays serial port transmission Serial Rx Yellow Displays serial port reception Button Name Action MENU menu activates the main menu, or returns to an upper level ︿ up cursor scrolls up through a list of items shown on the LCM panel’s second line ﹀ down cursor scrolls down through a list of items shown on the LCM panel’s second line SEL select selects the option listed on the LCM panel’s second line 1. Overview The buttons are manipulated in a manner similar to the way a modern cellular phone operates. As you move through the various functions and setting options, note that the top line shows the current menu or submenu name, and the bottom line shows the submenu name or menu item which is activated by pressing the SEL button. Welcome to Moxa CN2610 Dual LAN Async Server, a communication server with 8/16 asynchronous RS-232 ports and Dual 10/100 Mbps Ethernet LAN port. CN2610 Dual LAN Async Server can be used to connect terminals, modems, printers, and other asynchronous serial devices to LAN hosts. CN2610 complies with TCP/IP and IEEE 802.3 specifications using standard Ethernet 10/100BaseT and twisted pair 10/100BaseTX cable as the physical medium. Refer to CN2610 Dual LAN Async Server User’s Manual for more details. Real Panel 4. Hardware Installation 2. Package Checklist 1. Installing CN2610: open the package, and attach CN2610 to a desktop, or fasten it to the rack cabinet. CN 2610 Dual LAN Async Server products are shipped with the following items: 2. Wiring Requirements： y 1 CN 2610 Dual LAN Async Server y 1 AC power Cord ( only for CN2610-16 or CN2610-8) y 1CD-ROM y Quick Installation Guide y 1 RJ45 Loopback Tester y Product Warranty Booklet y Rackmount kit including 2 brackets and 8 screws y 1 CBL-RJ45F9-150 y 1 CBL-RJ45M25-150 Optional Accessories y CBL-RJ45M9-150 y CBL-RJ45F9-150 y CBL-RJ45M25-150 y CBL-RJ45F25-150 RJ45 8-pin to DB9 Male cable, 150 cm RJ45 8-pin to DB9 Female cable, 150 cm RJ45 8-pin to DB25 Male cable, 150 cm RJ45 8-pin to DB25 Female cable, 150 cm Connector Function AC Power Input Automatic detection of 100-240V, 47-63Hz AC power supply (CN2610-16 or CN2610-8) Automatic detection of 12-48VDC, 1.01A at 12V, 240 mA at 48V DC power supply (CN2610-16-48V or CN2610-8-48V) Power On/Off Switch I indicates power on; O indicates power off RS-232 Console Port One RJ45 connector for console terminal connection LAN1 Auto detection for 10/100 Mbps LAN2 Auto detection for 10/100 Mbps Serial Ports One RJ45 connector for DCE(modem) connection A. Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point. B. NOTE: Do not run signal or communication wiring and power wiring in the same wire conduit. To avoid interference, wires with different signal characteristics should be routed separately. C. Where necessary, it is strongly advised that you label wiring to all devices in the system. 3. Connecting Power： A. AC：Connect CN2610 100-240 VAC power line with its AC connector. If the power is properly supplied, the “Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change to a green color. LCM Display B. DC：Connect CN2610-16/8-48V’s power cord to CN2610’s DC connector. Next, follow the steps below： We recommend using LCM display and four push buttons to configure the IP address at the first time installation. 1. Loosen the screws on the V+ and V- terminals of CN2610-8/16-48V’s terminal block. 2. Connect the power cord’s 48 VDC wire to the terminal block’s V+ terminal, and the power cord’s DC Power Ground wire to the terminal block’s V- terminal, and then tighten the terminal block screws. (Note: CN2610-8/16-48V can still operate even if the DC 48V and DC Power Ground are reversed.) Basic Operation： DC Power 48V If the CN2610 is working properly, the LCM panel will display a green color. The red Ready LED will also light up, indicating that the CN2610 is receiving power. After the red Ready LED turns to green, you will see a display similar to: C N 2 NOTE: Notify your sales representative if any of the above items is missing or damaged. 3. Hardware Introduction 6 1 0 - 1 6 _ 3 1 9 2 . 1 6 8 . 1 2 7 . 2 5 4 Front Panel If the power is properly supplied, the “Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change to a green color. CN2610-16 is the CN2610’s name 03 is the CN2610’s serial number 192.168.127.254 is the CN2610’s IP address Grounding CN2610-16/8-48V Grounding and wire routing helps limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the There are four push buttons on CN2610’s nameplate. Going from left to right, the buttons are: P/N: 18020260001 —1— —2— —3—

— 1 — — 2 — — 3 — CN2610 Series Quick Installation Guide Fourth Edition, August 2007 1. Overview Welcome to the Moxa CN2610 dual-LAN terminal server, a communication server with 8 or 16 RS-232 ports and dual 10/100 Mbps Ethernet LAN ports. The CN2610 dual-LAN terminal server can be used to connect terminals, modems, printers, and other serial devices to LAN hosts. Rhw CN2610 complies with TCP/IP and IEEE 802.3 specifications using standard Ethernet 10/100BaseT and twisted pair 10/100BaseTX cable as the transmission medium. 2. Package Checklist The CN2610 dual-LAN terminal server products are shipped with the following items: � 1 CN2610 Terminal Server � 1 power cord (AC models only)* � Document and & Software CD-ROM � Quick Installation Guide (this guide) � 1 DB9 serial cable (CBL-RJ45F9-150) � 1 DB25 serial cable (CBL-RJ45M25-150) * Power cords are available with US, Euro, UK, and JP plugs. Optional Accessories � CBL-RJ45M9-150: RJ45 (8-pin) to DB9 (male) cable, 150 cm � CBL-RJ45F9-150: RJ45 (8-pin) to DB25 (female) cable, 150 cm � CBL-RJ45M25-150: RJ45 (8-pin) to DB25 (male) cable, 150 cm � CBL-RJ45F25-150: RJ45 (8-pin) to DB25 (female) cable, 150 cm NOTE: Notify your sales representative if any of the above items are missing or damaged. 3. Hardware Introduction Front Panel Rx Tx 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Reset Ready SEL MENU CN2610 16 port RS-232 Async Server LCM Display Panel Reset Button Ready LED Push Buttons LED Indicators LED Color Description Reset None Press the Reset button for 5 seconds to load factory defaults. The CN2610 will beep twice when the configuration has been reset. Red Used for configuring the IP address and other parameters. Ready Green Lights up when the CN2610 system is ready. Serial Tx Green Flashes to indicate serial port transmission. Serial Rx Yellow Flashes to indicate serial port reception. Rear Panel 1 2 3 4 5 6 7 8 Serial ports AC POWER 100-240V, 47-63Hz Console LAN1 LAN2 9 10 11 12 13 14 15 16 10/100BaseT Ethernet Ports RS-232 Console Port Serial Ports Power Input Power On/Off Switch Connector Function AC Power Input Automatic detection of 100-240V, 47-63 Hz AC power supply (CN2610-8 or CN2610-16). Power On/Off Switch I indicates power on; O indicates power off. RS-232 Console Port One RJ45 connector for console terminal connection. LAN1 Auto detecting 10/100 Mbps port. LAN2 Auto detecting 10/100 Mbps port. Serial Ports 8 or 16 RJ45 connectors for DCE (modem) connections. LCM Display We recommend using the LCM display and four push buttons to configure the IP address for the first time. Basic Operation If the CN2610 is working properly, the LCM panel will display a green color. The red Ready LED will also light up, indicating that the CN2610 is receiving power. After the red Ready LED turns to green, you will see a display similar to the following: C N 2 6 1 0 - 1 6 _ 3 1 9 2 . 1 6 8 . 1 2 7 . 2 5 4 CN2610-16: The CN2610’s name 03: The CN2610’s serial number 192.168.127.254: The CN2610’s IP address There are four push buttons on the CN2610’s nameplate. Going from left to right, the buttons are: Button Name Action MENU menu Activates the main menu, or returns to an upper level. up cursor Scrolls up through a list of items shown on the LCM panel’s second line. down cursor Scrolls down through a list of items shown on the LCM panel’s second line. SEL select Selects the option listed on the LCM panel’s second line. The buttons are manipulated in a manner similar to the way a modern cellular phone operates. As you move through the various functions and setting options, note that the top line shows the current menu or submenu name, and the bottom line shows the submenu name or menu item that is activated by pressing the SEL button. Refer to CN2610 User’s Manual for more details. 4. Hardware Installation 1. Installing the CN2610 Open the package, and attach the CN2610 to a desktop, or fasten it to the rack cabinet. 2. Wiring Requirements A. Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point. B. NOTE: Do not run signal or communication wiring and power wiring in the same wire conduit. To avoid interference, wires with different signal characteristics should be routed separately. C. Where necessary, we strongly advised that you label wiring to all devices in the system. 3. Connecting Power AC: Connect the CN2610 100-240 VAC power line with its AC connector. If the power is properly supplied, the “Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change to a green color. If the power is properly supplied, the “Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change to a green color. 4. Connecting to the Network Connect one end of the Ethernet cable to the CN2610’s 10/100M Ethernet port and the other end of the cable to the Ethernet network. There are 2 LED indicators located on the top left and right corners of the Ethernet connector. If the cable is properly connected, the CN2610 will indicate a valid connection to the Ethernet in the following ways: 8 1 The top right corner LED indicator maintains a solid green color when the cable is properly connected to a 100 Mbps Ethernet network. The top left corner LED indicator maintains a solid orange color when the cable is properly connected to a 10 Mbps Ethernet network. 5. Connecting to a Serial Device P/N: 1802026000213

— 1 — — 2 — — 3 — CN2610 Series Quick Installation Guide Third Edition, May 2006 1. Overview Welcome to Moxa CN2600 Dual LAN Console Server, a communication server with 8/16 asynchronous RS-232 ports and Dual 10/100 Mbps Ethernet LAN port. CN2600 Dual LAN Console Server can be used to connect terminals, modems, printers, and other asynchronous serial devices to LAN hosts. CN2600 complies with TCP/IP and IEEE 802.3 specifications using standard Ethernet 10/100BaseT and twisted pair 10/100BaseTX cable as the physical medium. 2. Package Checklist CN 2600 Dual LAN Console Server products are shipped with the following items: y 1 CN 2600 Dual LAN Console Server y 1 Ac power Cord ( only for CN2610-16 or CN2610-8) y 1CD-ROM y Quick Installation Guide y 1 RJ45 Loopback Tester y Product Warranty Booklet y Rackmount kit including 2 brackets and 8 screws y 1 CBL-RJ45F9-150 y 1 CBL-RJ45M25-150 Optional Accessories y CBL-RJ45M9-150 y CBL-RJ45F9-150 y CBL-RJ45M25-150 y CBL-RJ45F25-150 RJ45 8-pin to DB9 Male cable, 150 cm RJ45 8-pin to DB9 Female cable, 150 cm RJ45 8-pin to DB25 Male cable, 150 cm RJ45 8-pin to DB25 Female cable, 150 cm NOTE: Notify your sales representative if any of the above items is missing or damaged. 21 3. Hardware Introduction Front Panel LED Color Description Reset None If you forget the password, press this button for 5 seconds, then the system will be returned to factory default. Use tools with sharp end to press Reset button continuously. The Ready LED will keep blinking when your press the Reset button. After releasing the Reset button, you will hear Bi-Bi sound, meaning the default settings are restored and CN2600 has rebooted. Ready Red Displays CN2600 system is powered on. Ready Green Displays CN2600 system is ready. Serial Tx Green Displays serial port transmission. Serial Rx Yellow Displays serial port reception. Real Panel Connector Function AC Power Input Automatic detection of 100-240V, 47-63Hz AC power supply (CN2610-16 or CN2610-8). Power On/Off Switch I indicates power on; O indicates power off RS-232 Console Port One RJ45 connector for console terminal connection LAN1 Auto detecting 10/100 Mbps port LAN2 Auto detecting 10/100 Mbps port Serial Ports 8 or 16 RJ45 connectors for DCE (modem) connections LCM Display We recommend using the LCM display and four push buttons to configure the IP address for the first time. Basic Operation If the CN2600 is working properly, the LCM panel will display a green color. The red Ready LED will also light up, indicating that the CN2600 is receiving power. After the red Ready LED turns to green, you will see a display similar to: C N 2 6 1 0 - 1 6 _ 3 1 9 2 . 1 6 8 . 1 2 7 . 2 5 4 CN2610-16 is the CN2600’s name 03 is the CN2600’s serial number 192.168.127.254 is the CN2600’s IP address There are four push buttons on CN2600’s nameplate. Going from left to right, the buttons are: Button Name Action MENU menu activates the main menu, or returns to an upper level up cursor scrolls up through a list of items shown on the LCM panel’s second line down cursor scrolls down through a list of items shown on the LCM panel’s second line SEL select selects the option listed on the LCM panel’s second line The buttons are manipulated in a manner similar to the way a modern cellular phone operates. As you move through the various functions and setting options, note that the top line shows the current menu or submenu name, and the bottom line shows the submenu name or menu item which is activated by pressing the SEL button. Refer to CN2600 Dual LAN Console Server User’s Manual for more details. 4. Hardware Installation 1. Installing CN2600 Open the package, and attach CN2600 to a desktop, or fasten it to the rack cabinet. 2. Wiring Requirements A. Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point. B. NOTE: Do not run signal or communication wiring and power wiring in the same wire conduit. To avoid interference, wires with different signal characteristics should be routed separately. C. Where necessary, it is strongly advised that you label wiring to all devices in the system. 3. Connecting Power AC: Connect CN2600 100-240 VAC power line with its AC connector. If the power is properly supplied, the “Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change to a green color. If the power is properly supplied, the “Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change to a green color. 4. Connecting to the Network Connect one end of the Ethernet cable to CN2600’s 10/100M Ethernet port and the other end of the cable to the Ethernet network. There are 2 LED indicators located on the top left and right corners of the Ethernet connector. If the cable is properly connected, CN2600 will indicate a valid connection to the Ethernet in the following ways: The top right corner LED indicator maintains a solid green color when the cable is properly connected to a 100 Mbps Ethernet network. The top left corner LED indicator maintains a solid orange color when the cable is properly connected to a 10 Mbps Ethernet network. P/N: 1802026000200

CN2610 Dual-LAN Async Server User’s Manual Fourth Edition, July 2007 www.moxa.com/product Moxa Technologies Co., Ltd. Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Web: www.moxa.com MOXA Technical Support Worldwide: [email protected] The Americas: [email protected]