Moxa Technologies MC-7270-DC-CP-T Series Manuals

– 1 – – 2 – – 3 – P/N: 1802072700010 MC-7270-DC-CP-T Series Quick Installation Guide First Edition, July 2015 Overview The MC-7270-DC-CP-T computer uses the Intel® Core™ CPU processor and comes with 4 serial ports, 4 Gigabit Ethernet ports, and 6 USB hosts. The computer offers high performance and versatile peripherals for industrial applications. Package Checklist Before installing the MC-7270-DC-CP-T, verify that the package contains the following items: • 1 MC-7270-DC-CP-T embedded computer • 1 2-pin terminal block for DC power input • 1 2-pin terminal block for power ON/OFF switch • Hard disk installation kit • Documentation and driver CD • Quick installation guide (printed) • Warranty card NOTE: Please notify your sales representative if any of the above items are missing or damaged. MC-7270-DC-CP-T Panel Layout The following figures show the panel layouts of the MC-7270-DC-CP-T. MC-7270-DC-CP-T Front View MC-7270-DC-CP-T Rear View LED Indicators The following table describes the LED indicators located on the front panel and the LAN ports of the MC-7270-DC-CP-T. LED Name LED Color LED Function Power (on the front panel) Green Power is on and functioning normally Off Power is off or power error exists Storage (on the front panel) Red (on) HDD/SSD card is inserted and detected Red (blinking) HDD/SSD card is reading/writing Off No activity LAN (on each LAN port) Green 100 Mbps Ethernet mode Yellow 1000 Mbps (Gigabit) Ethernet mode Off No activity or 10 Mbps Ethernet mode Installing the MC-7270-DC-CP-T Wall or Cabinet Mounting The MC-7270-DC-CP-T comes with two brackets pre-installed on both ends of the computer. Use two screws per side to attach the MC-7270-DC-CP-T to a wall or cabinet. We recommend using size M4 or larger screws. Restricted Access Location This equipment is intended to be used in restricted access locations, such as a computer room, with access limited to service personnel or users who have been instructed on how to handle the metal chassis of equipment that is so hot that special protection may be needed before touching it. The location should only be accessible with a key or through a security identity system. WARNING External metal parts of this equipment are extremely hot! Before touching the equipment, you must take special precautions to protect your hands and body from serious injury. Connector Description Power Connector The MC-7270-DC-CP-T model has a 24 VDC power input (via the terminal block). If power is supplied properly, the Power LED will light up. The OS is ready when the Ready LED is a steady green. Grounding the MC-7270-DC-CP-T Proper grounding and wire routing help limit the effects of noise from electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting the power. There is a ground symbol next to the connector. Connect the ground wire to an appropriate grounded metal surface. ATTENTION This product is intended to be mounted on a well-grounded mounting surface, such as a metal panel. VGA and DVI-D Outputs The MC-7270-DC-CP-T comes with a DB-15 female connector on the rear panel to connect a VGA monitor, and has two DVI-D connectors on the rear panel to connect displays over a Digital Visual Interface.

MC-7270-DC-CP-T User’s Manual Edition 2.0, February 2017 www.moxa.com/product © 2017 Moxa Inc. All rights reserved.