MS Sedco 216TX Series Manuals

• Microprocessor-Controlled Active Infrared • Digital Circuit Design • Wireless Transmitter Features ClearPath™ Technology With Three User-selectable Frequency Settings (300 MHz, 390 MHz, HDRC™) • FCC Licenses For All Three Frequency Settings • SignalLock™ Guarantees Signal Transmission When Presence Is Detected • Integrated Signal Radiating Antenna Boosts Signal Strength • Compatible With Most 300 MHz, 390 MHz, and ClearPath™ CP/TX Receivers The 216TX Series wireless touchless switches are infrared devices designed to activate full and low energy automatic doors. The built-in wireless transmitter offers the added benefit of easy installation, requiring no wiring to the switch. The hands free operation of the 216TX makes them ideal for ADA applications and locations where hygiene is important such as restrooms, health care facilities or cleanrooms. The 216TX is microprocessor controlled, allowing for superior operation in a smaller unit. The 216TX has a 4 1/2” stainless steel faceplate and comes installed in the 1020 box complete with a transmitter. Product Name 216TX Series Infrared Wireless Touchless Door Activator Switches Contact Information MS SEDCO 7898 Zionsville Road Indianapolis, IN 46268 Phone: (317) 842-2545 www.mssedco.com Product Description BASIC USE Technical Data • ADA Compliant Hands-Free, Germ-Free Operation SPECIFICATIONS Detection Method Amplitude modulated, coded carrier active infrared Avg. Radiated Power Less than 5 mW/cm² Input Voltage 216: 3.3 Volts DC Coin Cell Battery (CR2032) TX: 9 Volt DC Battery 216TX Series Infrared Wireless Touchless Door Activator Switches Temperature -4°F to 140°F (-20°C to 60°C) Face Plate Finishes Standard: Brushed Stainless Steel For Special Finishes & Legends, Contact Factory Face Plate Sizes 4 1/2” square Operating Distance ±1 - 5 inches Unit Size 4 3/4”W x 4 3/4”H x 2 1/4”D Mounting Options Includes wall mount box 072017 216TX-TG Response Time <300 mSeconds APPLICABLE STANDARDS American National Standards Institute (ANSI) - Building Hardware Manufacturers Association (BHMA) - ANSI/BHMA A156.10 & A156.19. Installation Refer to MS SEDCO Installation Instructions. Availability & Cost AVAILABILITY Available internationally from manufacturer's authorized distributors; contact MS SEDCO for the location of the nearest distributor. COST Cost information on MS SEDCO products is available from the manufacturer's authorized distributors. Warranty A one year warranty is available from the manufacturer covering defects in materials and workmanship. Contact MS SEDCO for details. Maintenance MS SEDCO recommends that all maintenance and adjustments be performed by an AAADM Certified Technician. Technical Services MS SEDCO's staff of factory trained sales and service personnel offer design assistance and technical support. Local distributors are also available to assist in selecting appropriate devices for specific uses and to provide onsite installation 7898 Zionsville Road Indianapolis, Indiana 46268 Telephone: (317) 842-2545 Fax: (317) 849-3387 www.mssedco.com [email protected]