MSA ULTIMA X-Series Manuals

Ultima®/Ultima®X Series Controller and Calibrator Instruction Manual THIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FOR USING OR SERVICING THE PRODUCT. Like any piece of complex equipment, this instrument will perform as designed only if it is used and serviced in accordance with the manufacturer’s instructions. OTHERWISE, IT COULD FAIL TO PERFORM AS DESIGNED AND PERSONS WHO RELY ON THIS PRODUCT FOR THEIR SAFETY COULD SUSTAIN SEVERE PERSONAL INJURY OR DEATH. The warranties made by Mine Safety Appliances Company with respect to the product are voided if the product is not used and serviced in accordance with the instructions in this manual. Please protect yourself and others by following them. We encourage our customers to write or call regarding this equipment prior to use or for any additional information relative to use or repairs. IN the U.S., to contact your nearest stocking location, dial toll-free 1-800-MSA-INST. To contact MSA International, dial1-412- 967-3354 © MINE SAFETY APPLIANCES COMPANY 2010 - All Rights Reserved This manual is available on the internet at www.msanet.com Manufactured by MSA NORTH AMERICA P.O. Box 427, Pittsburgh, Pennsylvania 15230 (L) Rev 12 813379 " WARNING

GB Order No.: 10083027/00 Quick Start Guide ULTIMA/ULTIMA® X Series Controller and Calibrator The quick start guide does not replace the operating manual. It is imperative that the operating manual file on CD be read and observed when using the apparatus. In particular, the safety instructions, as well as the infor- mation for the use and operation of the apparatus, must be carefully read and observed. The operating manual can also be provided as a hard copy upon request. Fig. 1 Calibrator Fig. 2 Controller 1 Zero Button 1 Display 2 Calibrate Button 2 Numeric Buttons 3 Address Button 3 Operating Buttons The Calibrator and Controller are hand-helds for non-intrusive calibration of an ULTIMA/ULTIMA X Series Gas Monitor, enabling the Monitor to be calibrated without opening the enclosure. They are intrinsically safe products for use in hazardous areas. 1 1 2 3 2 3 s m

Installation & Maintenance Instructions Ultima® X Series Gas Monitors Reading Tel: +44 (0)118 9311188 | Email: [email protected] Aberdeen Tel: +44 (0)1224 725999 | Email: [email protected] Registered Address ABLE Instruments & Controls Ltd Cutbush Park, Danehill, Lower Earley, Reading, Berkshire, RG6 4UT. UK. Web able.co.uk E-commerce 247able.com

Ultima ® X Series Gas Monitors instruction manual " WARNING THIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FOR USING OR SERVICING THE PRODUCT. Like any piece of complex equipment, the unit will perform as designed only if it is installed, used and serviced in accordance with the manufacturer’s instructions. OTHERWISE IT COULD FAIL TO PERFORM AS DESIGNED AND PERSONS WHO RELY ON THIS PRODUCT FOR THEIR SAFETY COULD SUSTAIN SEVERE PERSONAL INJURY OR DEATH. The warranties made by Mine Safety Appliances Company with respect to the product are voided if the product is not used and serviced in accordance with the instructions in this manual. Please protect yourself and others by following them. We encourage our customers to write or call regarding this equipment prior to use or for any additional information relative to use or repairs. In the U.S., to contact your nearest stocking location, dial toll-free 1-800-MSA-INST. To contact MSA International, dial 1-412-967-3354. This manual is available on the internet at www.msanet.com © MINE SAFETY APPLIANCES COMPANY 2005 - All Rights Reserved Manufactured by MSA INSTRUMENT DIVISION P.O. Box 427, Pittsburgh, Pennsylvania 15230 (L) Rev 3 10036101

Operating Manual ULTIMAX-Series Gas Monitors Order No. 10046690/09

GB Order No.: 10083026/02 Quick Start Guide ULTIMA® X – Series Gas Monitor This quick start guide does not replace the operating manual. It is imperative that the operating manual file on the CD be read and observed when using the apparatus. In particular, the safety instructions, as well as the information for the use and operation of the apparatus, must be carefully read and observed. The operating manual can also be provided as a hard copy upon request. 1 Enclosure with viewing window 2 Sensor electronics with LEDs and display 3 Display 4 Flameproof enclosure 5 Sensor housing 6 Sensor module 7 SensorGard (1) Unscrew the enclosure lid and remove the electronics module. (2) Mount the enclosure in the desired location and run suitable wiring to the enclosure. (3) Install the sensor module in the applicable threaded entry or connect remote sensor - catalytic and electrochemical sensors must point downwards, XIR sensor must be horizontal. (4) Read the identification label on the side of the electronics module: a) if “2-wire mA” do not connect ground wire to J8-3. b) if “3-wire mA”connect connect ground wire to J8-3. (5) Connect 24 VDC power to connector J8-1. (6) Connect J8-2 to the 4-20mA on remote system. (7) Connect the sensor modules to connector J1. (8) Connect optional relays and/or reset (acknowledge) push-button to J10. (9) Replace the electronics module and the lid on the enclosure. (10) Apply power and observe the LCD as all the segments light, the software version displays and a 30 second (self check) countdown occurs. (11) After the 30 second countdown, observe that the gas type and gas concentration alternately display (for three wire units with LEDs, green LED is ON and red LED is OFF). (12) Perform a gas calibration to ensure proper operation. 1 3 2 7 6 5 4

Ultima ® X Series Gas Monitor Safety Manual SIL 2 Certified " The Ultima X Series Gas Monitor is qualified as an SIL 2 device under IEC 61508 and must be installed, used, and maintained in accordance with this manual if compliance with this IEC functional safety standard is desired. Failure to do so can result in a reduced safety level. In the U.S., to contact your nearest stocking location, dial toll-free 1-800-MSA-INST To contact MSA International, dial (724) 776-8626. © MSA 2015 - All Rights Reserved This manual is available on the internet at www.msasafety.com. Inquiries can also be e-mailed to [email protected]. Manufactured by MSA NORTH AMERICA 1000 Cranberry Woods Drive, Cranberry Township, PA 16066 (L)- Rev 1 Y-HLR 10100751