Musical Fidelity V-LPSII Manuals

V-LPSII Phono Stage Instructions Introduction Thank you for purchasing the V-LPSII. We sincerely hope that it will bring you many years of outstanding listening pleasure. Installation Precautions Your new V-LPSII is designed and built to provide trouble-free performance, but as with all electronic devices, it is necessary to observe a few precautions: Do not use the V-LPSII near water. The unit must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, must be placed on the unit. Keep the V-LPSII away from heat such as radiators. No naked flame sources, such as lighted candles, should be placed on the unit. Power Supply Note: Only use approved Musical Fidelity DC power supply. The use of other adaptors or supplies could seriously damage the V-LPSII . This Hi-fi product has been tested to ensur that its operation is not adversely affected b normal background levels of Radi Frequency Interference (R.F.I.), and that does not itself generate excessive amount of interference. However, if a problem persists, please contact your Musical Fidelit agent. Never open the case of the V-LPSII yourse as this will invalidate the guarantee. Place all connecting cables where they ar not likely to be walked on or trapped b items placed on them. The V-LPSII will operate in accordance wit its specifications within the followin environmental range: Temperature 5 to 45 degrees Celsius Humidity 10 to 90% non condensing There are no user adjustments inside Please refer all service work to a authorised Musical Fidelity agent. Front and back connections Moving magnet (MM)/moving coil (MC) input select switch 4mm earth terminal Power input socket Power LED Connections All connections must be made before the mains adaptor is plugged in, and before any amplifier connected is switched on. Always switch off the equipment attached to the V- LPSII before connecting/disconnecting power, changing leads or inputs. Inputs Using good quality RCA leads (not supplied), connect the left and right turntable outputs to the correct V-LPSII INPUT sockets. Use the phono MM input for moving magnet cartridges. Make sure MM/MC switch is OUT. Use the phono MC input for moving coil cartridges. Make sure MM/MC switch is IN. An earthing terminal is provided. Connect earth wire from turntable to this terminal if hum is apparent. Other setups may work fine with this terminal left disconnected and no harm is done in doing so. Outputs Connect the V-LPSII left and right OUTPUTS to the desired LINE LEVEL (e.g AUX) inputs of the amplifier system. Power Plug the DC connector lead from the power supply unit into the V-LPSII power inlet socket, and plug the adaptor itself into a convenient wall mains outlet. The blue LED will light to confirm the unit is ready for use. Use Turn the volume on amplifier to normal listening levels, sit back and enjoy the music. These products have been designed so that it may be left on indefinitely, but please note that the mains adapter may become warm to the touch - this is normal. Left (white) & right (red) RCA moving coil (MC) inputs Left (white) & right (red) RCA moving magnet (MM) inputs Left (white) & right (red) RCA line outputs

V-LPSu Phono Stage Instructions MM MC INPUI SELECT 12'vOC -- nm PHONO S TAGE V-LPS11 ~ MUSICAL FIDELITY OUTPUT I. 0-- Connections All connections must be made before the mains adaptor is plugged in, and before any amplifier connected is switched on. Always switch off the equipment attached to the V- LPS11 before connecting/disconnecting power, changing leads or inputs. Inputs Using good quality RCA leads (not supplied), connect the left and right turntable outputs to the correct V-LPS 11 INPUT sockets. Use the phono MM input for moving magnet cartridges. Make sure MM/MC switch is OUT. Use the phono MC input for moving coil cartridges. Make sure MM/MC switch is IN. An earthing terminal is provided. Connect earth wire from turntable to this terminal if hum is apparent. Other setups may work fine with this terminal left disconnected and no harm is done in doing so. Outputs Connect the V-LPSrr left and right OUTPUTS to the desired LINE LEVEL (e.g AUX) inputs of the amplifier system. Power Plug the DC connector lead from the power supply unit into the V-LPS 11 power inlet socket, and plug the adaptor itself into a convenient wall mains outlet. The blue LED will light to confirm the unit is ready for use. Use Turn the volume on amplifier to normal listening levels, sit back and enjoy the music. These products have been designed so that it may be left on indefinitely, but please note that the mains adapter may become warm to the touch -this is normal. Introduction Thank you for purchasing the V-LPSu. We sincerely hope that it will bring you many years of outstanding listening pleasure. Installation Precautions Your new V-LPS11 is designed and built to provide trouble-free performance, but as with all electronic devices, it is necessary to observe a few precautions: Do not use the V-LPSu near water. The unit must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, must be placed on the unit. Keep the V-LPSu away from heat such as radiators. No naked flame sources, such as lighted candles, should be placed on the unit. Power Supply Note: Only use approved Musical Fidelity DC power supply. The use of other adaptors or supplies could seriously damage the V-LPS 11 This Hi-fi product has been tested to ensure that its operation is not adversely affected by normal background levels of Radio Frequency Interference (R.F.I.), and that it does not itself generate excessive amounts of interference. However, if a problem persists, please contact your Musical Fidelity agent. Never open the case of the V-LPS 11 yourself, as this will invalidate the guarantee. Place all connecting cables where they are not likely to be walked on or trapped by items placed on them. The V-LPS11 will operate in accordance with its specifications within the following environmental range: Temperature 5 to 45 degrees Celsius Humidity 1 0 to 90% non condensing There are no user adjustments inside. Please refer all service work to an authorised Musical Fidelity agent. Front and back connections Moving magnet (MM)/moving coil (MC) input select switch Power input socke !lmm earth terminal Power LED • • V-LPS, .. MUSK:M. f !CalfY Left (white) & right (red) RCA moving coil (MC) inputs Left (white) & right (red) RCA line outputs Left (white) & right (red) RCA moving magnet (MM) inputs