NAD power amplifier 2200 Manuals

2200 Power Amplifier Date of manufacture : Jan 87 - Feb 89 Please note that this document contains the text from the original product brochure, and some technical statements may now be out of date Reproducing musical signals, the NAD 2200 routinely delivers over 500 watts per channel into typical loudspeaker impedances. In actual measurement with speakers of complex impedance and lower-than-average sensitivity, the 2200 produces peak sound pressure levels exceeding 115 dB SPL(Sound Pressure Level) in a medium to large room, with no audible or measurable distortion. But in size, heat dissipation, and cost, the NAD 2200 is similar to many other amplifiers rated at only 100 watts per channel. For audiophiles who can use and appreciate its capability, the 2200 is unquestionably the best-buy power amplifier ever manufactured. The Key: Real-World Design Examined from one perspective, the 2200 is a very conservatively rated 100 watts/channel power amplifier that has an extraordinary +6 dB of dynamic headroom, meaning that it can produce more than four times its rated power during musical transients. Looked at another way, the 2200 is a super-amplifier that produces between 400 and 800 watts per channel for music (depending on speaker impedance), but contains an “intelligent” power supply that gives it the modest size, heat dissipation, and cost of a conventional 100 W/ch amplifier. The key to the design of the 2200, as with all NAD amplifiers, is that its design goes beyond conventional specifications and laboratory tests to provide optimum performance under the conditions of everyday use, NAD amplifiers are designed, first and foremost, to reproduce the dynamically varying waveforms of music-not just sine-wave test tones. They are designed to deliver undistorted power to loudspeakers of any impedance-not just to an 8-ohm test resistor. NAD’s engineers have always recognised the importance of supplying high levels of output current to drive the low and complex impedances of real loudspeakers. NAD premiered the use of Soft Clipping™ in solid-state amplifiers to prevent harsh distortion when the demands of the musical signal exceed the amplifier’s limit. All NAD amplifiers feature high dynamic headroom for the transient sounds in music. The NAD 2200 is a truly “dynamic” power amplifier. Its heart is the unique PowerTracker control circuit (patent pending), which automatically adjusts the amplifier’s maximum power output according to the dynamic character of the signal that is being amplified. As befits a product designed for the reproduction of music, the NAD 2200 achieves its maximum power output of 400 to 800 watts per channel when amplifying wide-range musical signals that contain peaks IO to 20 dB above the average level. But when the amplifier is fed a high and constant signal (i.e. a sine-wave test tone instead of a musical waveform), its maximum output automatically declines to avoid overheating, and eventually levels out between 100 and 200 watts per channel.