National Instruments NI 9213 Manuals

GETTING STARTED GUIDE NI 9213 16 TC, ±78 mV, 24 Bit, 75 S/s Aggregate This document explains how to connect to the NI 9213. Note Before you begin, complete the software and hardware installation procedures in your chassis documentation. Note The guidelines in this document are specific to the NI 9213. The other components in the system might not meet the same safety ratings. Refer to the documentation for each component in the system to determine the safety and EMC ratings for the entire system. Caution Electrostatic Discharge (ESD) can damage the NI 9213. To prevent damage, use industry-standard ESD prevention measures during installation, maintenance, and operation. Safety Guidelines Operate the NI 9213 only as described in this document. Caution Do not operate the NI 9213 in a manner not specified in this document. Product misuse can result in 2 | ni.com | NI 9213 Getting Started Guide a hazard. You can compromise the safety protection built into the product if the product is damaged in any way. If the product is damaged, return it to NI for repair. Hazardous Voltage This icon denotes a warning advising you to take precautions to avoid electrical shock. Safety Voltages Connect only voltages that are within the following limits: Channel-to-channel None Channel-to-earth ground Continuous 250 Vrms, Measurement Category II Withstand up to 4,000 m 3,000 Vrms, verified by a 5 s dielectric withstand test Measurement Category II is for measurements performed on circuits directly connected to the electrical distribution system. This category refers to local-level electrical distribution, such as NI 9213 Getting Started Guide | © National Instruments | 3 that provided by a standard wall outlet, for example, 115 V for U.S. or 230 V for Europe. Caution Do not connect the NI 9213 to signals or use for measurements within Measurement Categories III or IV. Safety Guidelines for Hazardous Voltages If hazardous voltages are connected to the device, take the following precautions. A hazardous voltage is a voltage greater than 42.4 Vpk voltage or 60 VDC to earth ground. Caution Ensure that hazardous voltage wiring is performed only by qualified personnel adhering to local electrical standards. Caution Do not mix hazardous voltage circuits and human-accessible circuits on the same module. Caution Ensure that devices and circuits connected to the module are properly insulated from human contact. Caution When module terminals are hazardous voltage LIVE (>42.4 Vpk/60 VDC), you must ensure that devices and circuits connected to the module are 4 | ni.com | NI 9213 Getting Started Guide

(217) 352-9330 | [email protected] | artisantg.com -~ ARTISAN® ~I TECHNOLOGY GROUP Your definitive source for quality pre-owned equipment. Artisan Technology Group Full-service, independent repair center with experienced engineers and technicians on staff. We buy your excess, underutilized, and idle equipment along with credit for buybacks and trade-ins. Custom engineering so your equipment works exactly as you specify. • Critical and expedited services • Leasing / Rentals/ Demos • In stock/ Ready-to-ship • !TAR-certified secure asset solutions Expert team I Trust guarantee I 100% satisfaction All trademarks, brand names, and brands appearing herein are the property of their respective owners. Find the National Instruments NI 9213 at our website: Click HERE GETTING STARTED GUIDE NI 9213 16 TC, ±78 mV, 24 Bit, 75 S/s Aggregate hnology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www This document explains how to connect to the NI 9213. Note Before you begin, complete the software and hardware installation procedures in your chassis documentation. Note The guidelines in this document are specific to the NI 9213. The other components in the system might not meet the same safety ratings. Refer to the documentation for each component in the system to determine the safety and EMC ratings for the entire system. Safety Guidelines Operate the NI 9213 only as described in this document. Caution Do not operate the NI 9213 in a manner not specified in this document. Product misuse can result in a hazard. You can compromise the safety protection built into the product if the product is damaged in any way. If the product is damaged, return it to NI for repair. 2 | ni.com | NI 9213 Getting Started Guide hnology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www Hazardous Voltage This icon denotes a warning advising you to take precautions to avoid electrical shock. Safety Voltages Connect only voltages that are within the following limits: Between any two terminals ±30 V maximum Isolation Channel-to-channel None Channel-to-earth ground Continuous 250 Vrms, Measurement Category II Withstand 2,300 Vrms, verified by a 5 s dielectric withstand test Measurement Category II is for measurements performed on circuits directly connected to the electrical distribution system. This category refers to local-level electrical distribution, such as that provided by a standard wall outlet, for example, 115 V for U.S. or 230 V for Europe. NI 9213 Getting Started Guide | © National Instruments | 3 hnology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www