National TESSERA RETURN Manuals

Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have any questions concerning these instructions, please call National Customer Service 800.482.1717. Assembly Instruction Telephone 800.482.1717 Fax 812.482.8800 www.NationalOfficeFurniture.com 3206400 Rev, - TESSERA RETURN INSTALL Figure A Tools Required -Screw Driver w/ #2 Phillips Bit -Level -Cable Ties Hardware -Glides x 4 -PHP #8x1 x 25 1 If not previously completed, make sure main desk is positioned and leveled in its final location prior to assembly of return. Figure B 2 Remove two flat brackets from the bottom of the shroud to access the interior as needed. Brackets can be discarded (Figure B) as they are only installed to protect during shipping. NOTE: Removable panel hangs from Z-clip brackets. Once flat brackets are removed care should be taken so that the panel does not disengage from Z-clip and damage the component. 3 Install the glides (Qty. 4) from the hardware kit to the bottom of the shroud (Figure C). Figure C