NEC 50XR4 Manuals

NEC Solutions (America), Inc. Model Information For the operation of your plasma monitor, refer to “Operation Manual”. PX-50XR4A

NEC Display Solutions of America, Inc. PC Control Connectors and Cables for NEC Plasma and Projectors v2.1 NEC labels the connector for RS232C serial communication the “PC Control” port. This PC Control port can be used for the following functions: • Communication from an AMX, Crestron or Extron control system. • Communication from a PC using the NEC PC Control Utility for basic projector control. • Communication from a PC using the NEC Geometric Correction Tool for adjusting a projector to display an image on a cylindrical, spherical or corner screen. • Communication from a PC using the NEC Image Express Utility to send images to the projector for presentations as well as basic projector control, projector lamp and error status or asset management. (These functions can also be accomplished via LAN or USB with models that have a network interface, optional network PC card or USB interface) NEC uses two types of connectors for the PC Control port, a D-Sub 9pin for larger projectors and a mini-DIN 8pin for smaller projectors due to space constraints on those models. Models with D-Sub 9Pin PC Control port: GT1150/2150/5000/6000/6000R LT280/380 MT1060/1065/1075 NP1000/2000/3150/4000/4001 VT770 PX-42VP5/42VM5/42VR5/42XM3/42XM4/42XM5/42XR3/42XR4/42XR5/42XP10/42XC10 PX-50XM4/50XM5/50XM6/50XR4/50XR5/50XR6/50XP10/50XC10 PX-61XM3/61XM4/60XM5/61XR3/61XR4/60XR5/60XP10/60XC10 A standard D-Sub 9P female to D-Sub 9P female “Null Modem” or “Cross” cable can be obtained at a local computer or electronics store. A “Straight Through” cable will not work. If you prefer to assemble your own cable, you can use the pin out information below. D-Sub 9P Female D-Sub 9P Female Pin 2 Pin 2 Pin 3 Pin 3 Pin 5 Pin 5 Pin 7 Pin 8 GND GND *Tie Pin 7 & 8 together at both ends of the cable if desired TxD RxD RxD TxD Pin 7 Pin 8 Note: The TheaterSync uses a “Straight Through” D-Sub 9P Male to 9P Female cable. Models with mini-DIN 8Pin PC Control port: HT410/510/1000/1100 LT180 LT30/35 LT240/260/245/265 NP40/50/60 VT37/47/470/570/575/670/676/48/480/580/49/490/491/590/595/695/700 WT600/610 A cable can be purchased from NEC using the following part number. (Service P/N: 73499390) If you prefer to assemble your own cable, use the pin out information below and the following tips. Soldering a mini-DIN connector can be tedious. To simplify the cable assembly, you can purchase a MAC or Sun type keyboard/mouse cable (mini-DIN 8P) at a local computer store. Cut a DIN connector from one end and attach a D-Sub 9P Female to that end using the pin out below. 1 2 3 4 5 6 7 8 Note: Do not confuse Pins 1 & 2 on the mini-DIN 8P connector. Pin 1 is below Pins 3 & 4 which are offset to one side of the connector. Pin 2 Pin 3 Pin 5 Pin 7 Pin 8 Pin 7 Pin 1 Pin 4 D-Sub 9P Female mini-DIN 8P Male GND GND RxD RxD TxD TxD *Tie Pin 7 & 8 together if desired NOTE1: It is recommended to set the projector to “Idle Mode” in the Setup menu for best Power ON response. NOTE2: For long cable runs it is recommended to set communication speed to 9600 bps in the Setup menu.

NEC Solutions (America), Inc. For the specifications of your plasma monitor, refer to “Model Information”. Operation Manual (Enhanced split screen Model)

====================================================================== Control Commands for NEC Plasma (Basic) Rev 1.0 Copyright (C) NEC Solutions (America), Inc. 2002-2006 ---------------------------------------------------------------------- Updated on November 29, 2006 ---------------------------------------------------------------------- This file contains information about NEC plasma control commands. Model Name VP : PX-42VP4/42VP4D/42VP5 VM : PX-42VM4/42VM5 VR : PX-42VR5 XM : PX-42XM2/42XM3/42XM4/42XM5/50XM3/50XM4/50XM5/50XM6/61XM2+/61XM3/61XM4/60XM5 XR : PX-42XR3/42XR4/42XR5/50XR4/50XR5/50XR6/61XR3/61XR4/60XR5 ====================================================================== Contents 1. Plasma Control 2. Connection Method 3. Interface Conditions 4. List of Commands 5. Command Descriptions 6. Table of Response Error Codes ====================================================================== 1. Plasma Control ---------------------------------------------------------------------- NEC plasmas make use of control commands that control the functions of the plasma via connection with a personal computer or another device. ====================================================================== 2. Connection Method ---------------------------------------------------------------------- The following 3 kinds of connection methods are available for sending and receiving control commands. 1. Serial connection using the serial port on the plasma A serial cable is required. Status of supported connection +----------------------------------------------------------------------------------------------------------------------------------+---------+ | | (1) | | | Serial | | | port | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42VP4/42VP4D/42VP5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42VM4/42VM5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42VR5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42XM2/42XM3/42XM4/42XM5/50XM3/50XM4/50XM5/50XM6/61XM2+/61Xm3/61XM4/60XM5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42XR3/42XR4/42XR5/50XR4/50XR5/50XR6/61XR3/61XR4/60XR5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ Yes: Supported No: Not supported ====================================================================== 3. Interface Conditions

*60,000 hour panel life is an approximate time for the display panel to reach half of it's original brightness. The panel life is based on motion video as the input source and all display settings at factory default. This time may vary if the source varies and monitor settings are not at factory default. The time given does not imply any warranty beyond the products standard warranty. vivid. adaptable. reliable. see back for details on NEC’s REAL WORLD CONTRAST MEASUREMENTS Showcase SeriesTM Home Entertainment Plasma Displays 42VR5, 42XR3, 50XR4 and 61XR3 Make every seat the best in the house. Crystal clear larger than life images ° Best in class image quality. NEC plasma displays provide a superior image every time. The NEC 61“ plasma display has received the DisplayMate “Five-Star” Best Video Hardware Award and PC Magazine Editor’s Choice Award. ° Capsulated Color Filter (CCF) and AccuCrimson Filter technology produces the truest most vivid real to life colors. ° Advanced AccuBlend™ converts non-native resolutions to the resolution of the display for flawless images. ° Digital AccuDevice allows for digital video processing for artifact and noise free video. ° Mass Area Superior Sampling (MASS) makes certain that your video is reproduced in a clear, precise way by eliminating jaggies and color bleeds. ° Color Tune Technology allows you to adjust individual colors without affecting the white balance. Fine tune the blues in skies or the greens in the trees. ° Gamma 12 provides the highest color processing in a plasma display at 68.7 billion colors (4096 steps) resulting in details in the dark areas like never seen before. ° High brightness and contrast. Allows for commanding video in most viewing environments. Designed specifically to meet the changing needs at home ° Unique PIP functionality. Allows for different PIP locations as well as size options and aspect ratios. ° Sleep timer. Allows for automatic shut off. ° Extensive connections to virtually any source including a satellite receiver, DVD, VCR, computer, video games and more. ° DVI with HDCP allows you to display HD content that is protected. ° Closed captioning ° Place anywhere. Fits into any space seamlessly with multiple screen sizes (42”, 50”, 61”). ° Compliment any room. NEC provides a full assortment of accessories. ° Direct source selection from remote. ° Multiple aspect ratio modes. Display the image based on the source or viewer’s preference. ° NEC offers high altitude flexibility as a standard feature (up to 9180 ft). ° Extremely quiet operation. Listen to your movie, not your equipment. Tough enough to meet the requirements of demanding households ° Long lasting up to 60,000 hour life (that’s 20 years, 8 hours a day!) ° Unsurpassed product reliability and service. Ranked #3 by PAC Media for product quality/reliability and product warranty repair/return programs. ° Low power consumption. Displays that consume as little as 270 watts. ° AccuShield phosphor protection system with the most comprehensive set of built-in modes to safeguard screen from phosphor-based image retention.

NEC Solutions (America), Inc. Visual Systems Division 50XR4 Installation Guide 50” Plasma Display v1.3 Contents Product Description and Notes Page 1 Ventilation Requirements Page 2 www.necvisualsystems.com 50XR4 Page 1 of 10 Display Dimensions Front, Top & Bottom Page 3 Rear, Left & Right Side Page 4 Display Dimensions w/Optional Speakers and Stand Page 5 Dimensions w/Optional Flat Wall Mount Page 6 Dimensions w/Optional Tilt Wall Mount Page 7 Dimensions w/Optional Ceiling Mount Page 8 Connections Page 9 Control Codes Page 10 Product Description Type: Plasma Display Screen Surface: Anti-Reflective Resolution: 1365x768 Color Correction: NEC CCF (Capsulated Color Filter, in panel) Aspect Ratio: 16:9 and AccuCrimson (in front filter) FCC: Class B Dimensions: 48.1”(W) x 29.0”(H) x 3.8”(D) DVI Input: HDCP capable Weight: 97 lbs Notes � This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation. � Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local building codes. All mounts should make secure contact to wood studs. � 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual). � Distances are in inches, for millimeters multiply by 25.4. � Distances may vary ±5%. Maximum Tilt Angles Below is the maximum angle that the display can be tilted Max Tilt Landscape 30°