NEC VT490 Manuals

NEC Display Solutions of America, Inc. VT490/590/595 Installation Guide Ceiling Mounted and Desktop Rev 1.2 www.necdisplay.com VT490/590/595 Page 1 of 6 Contents Product Description, Lens Specs, Notes and Formulas Pg 1 Diagrams & Distance Charts Pg 2 Cabinet Dimensions Pg 3-4 Ceiling Mount Dimensions Pg 5 Input Panel and Control Codes Pg 6 Product Description Type: 3 panel LCD projector, Brightness: VT490: 2000 ANSI Lumens 0.6” p-Si TFT w/MLA VT590/VT595: 2000 ANSI Lumens Resolution: VT490: 800 x 600 VT590/VT595: 1024x768 Fan Noise: 34 dB / 29dB @ 1 meter Dimensions: 12.1”(W) x 10.2”(H) x 4.4”(D) Weight: 6.17 lbs Power Consumption: 255W (max) BTU’s: 870 BTU/hour Lens Specifications Throw Ratio: 1.5 – 1.8:1 (for 100” diagonal) Focal Length: 18.9mm – 22.7mm Offset Angle: 8.3° - 10.0° (for 100” diagonal) F/#: 1.7 - 2.07 Screen Sizes: 25” - 300” diagonal (4:3) Manual Focus/Manual Zoom Notes � For screen sizes not indicated on the projection tables, use the formulas below. If the figures on the tables do not match the results of formulas, use the figures in the table. • All calculations are based on 4:3 aspect ratio. • Distances are in inches, for millimeters multiply by 25.4. • Distances may vary ±5%. Formulas The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in the Projection Formulas. Refer to the diagrams and charts for popular screen sizes on page 2: Definitions: 4:3 Screen Formulas: W = Image Width W = H x 4/3 H = Image Height (size) H = W x 3/4 B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4 C = Throw distance D = Vertical distance between lens center and screen top (screen bottom for desktop application) Projection Formulas: B = 0.266W C (wide) = 1.525W – 1.176 C (tele) = 1.828W – 1.173 D = 0.108W α (wide) = tan¯¹ (B/C(wide)) α (tele) = tan¯¹ (B/C(tele))

7N8P7261 Printed in China ©NEC Viewtechnology, Ltd. 2006 Ver. 1 09/06 (T) 1 Connect the supplied power cable. Schließen Sie das mitgelieferte Netzkabel an. Connecter le câble d'alimentation fourni. Collegate il cavo d´alimentazione in dotazione. Conecte el cable de alimentación suministrado. Anslut den medlevererade nätkabeln. 2 Turn on the main power switch. Schalten Sie den Hauptnetzschalter ein. Enfoncer l'interrupteur d'alimentation général. Accendete l´interruttore principale. Active el interruptor de alimentación principal. Slå på huvudströmbrytaren. Turn on the projector. Schalten Sie den Projektor ein. Allumer le projecteur. Accensione del proiettore. Encienda el proyector. Slå på strömmen till projektorn. Select a source. Auswählen einer Quelle. Sélectionner une source. Selezione di una fonte. Selección de una fuente. Välja en källa. Connect your computer to the projector. Schließen Sie ihren Computer an den Projektor an. Connecter l’ordinateur au projecteur. Collegate il vostro computer al proiettore. Conectar el ordenador al proyector. Anslut din dator till projektorn. VT695/VT595/VT590/VT490/VT59/VT49 Quick Setup Guide VT695/VT595/VT590/VT490/VT59/VT49 Quick Setup Guide VT695/VT595/VT/VT590/VT490/VT59/VT４９480/VT58/VT57/VT48 Quick Setup Guide OCUS F ME U N SELECT LAMP STATUS POWER ON/STAND BY SOURCE AUTO ADJ. ENTER EXIT STATUS LAMP POWER 2 1 SELECT MENU ENTER EXIT LAMP STATUS POWER ON/STAND BY AUTO ADJ. SOURCE ENTER EXIT MENU UP MAGNIFY PAGE OFF POWER ON PIC-MUTE DOWN SELECT MENU ENTER EXIT LAMP STATUS POWER ON/STAND BY AUTO ADJ. SOURCE VOLUME L-CLICK MOUSE R-CLICK AUTO ADJ. ASPECT HELP FREEZE PICTURE S-VIDEO VIDEO COMPUTER 2 LAMP MODE 1 Remove the lens cap. Nehmen Sie die Linsenkappe ab. Retirer le cache-objectif. Rimuovete il copriobiettivo. Quite la tapa de la lente. Ta bort linsskyddet. MENU SELECT LAMP STATUS POWER ON/STAND BY SOURCE AUTO ADJ. ENTER EXIT FOCUS ZOOM TIP: Press the AUTO ADJ. button to optimize an RGB image automatically. TIPP: Drücken Sie zum automatischen Optimieren des RGB- Bildes die AUTO ADJ.-Taste. ASTUCE: Appuyer sur la touche AUTO ADJ. pour optimiser automatiquement une image RGB. SUGGERIMENTO: Premete il tasto AUTO ADJ. per ottimizzare automaticamente l’immagine RGB. SUGERENCIA: Pulse el botón de AUTO ADJ. para optimizar una imagen RGB automáticamente. TIPS: Tryck på AUTO ADJ.-tangenten för att optimera en RGB- bild automatiskt. Fn F1 F12 (→ page 13, 57 of the User’s Manual) SELECT MENU ENTER EXIT LAMP STATUS POWER ON/STAND BY AUTO ADJ. SOURCE VOLUME L-CLICK MOUSE R-CLICK ASPECT HELP FREEZE PICTURE AUTO ADJ. S-VIDEO VIDEO COMPUTER LAMP MODE 1 2 AUDIO OUT AUDIO IN MONITOR OUT (COMP 1) COMPUTER 1 IN COMPUTER 2 (DVI-I) IN AUDIO IN S-VIDEO IN VIDEO IN PC CTRL L R L COMPUTER IN MONITOR OUT AUDIO IN S-VIDEO IN VIDEO IN PC CONTROL R COMPUTER 1 IN COMPUTER IN VT695/VT595 VT590/VT490/VT59/VT49 VGA signal cable (supplied) VGA-Signalkabel (Lieferumfang) Câble de signal VGA (fourni) Cavo dei segnali VGA (in dotazione) Cable de señal VGA (suministrado) VGA-signalkabel (medföljer)

Portable Projector VT695/VT595/VT590/VT490/VT59/VT49 User’s Manual

NEC Display Solutions of America, Inc. Whitepaper Projector Placement Comparison Ver. 2.4 www.necdisplay.com PJ Placement Page 1 of 2 Ceiling Mounted Installation This is a reference to compare placement between the different models. The ability to hang a projector higher is usually desired; this drawing allows you to see the height each model needs to be mounted at for a 100" screen. All the projectors are placed at the proper height (using 100" screen) and are within the zoom range for that lens. Note: All projectors shown at the middle point of their respective zoom range. WT610E Ceiling 100" Diagonal Screen Top Center Bottom Orange = LT280/LT380 Green = VT49 w/Standard Lens Lens shift Lens shift w/NP03ZL Lens Color Chart NP40 NP50 NP60 Red = VT490/VT590/VT595/VT695/VT700 NP08ZL Lens shift Blue = NP1000/NP2000/NP3150 Brown = NP4000/NP4001

7N8P7261 Printed in China ©NEC Viewtechnology, Ltd. 2006 Ver. 1 09/06 (T) 1 Connect the supplied power cable. Schließen Sie das mitgelieferte Netzkabel an. Connecter le câble d'alimentation fourni. Collegate il cavo d´alimentazione in dotazione. Conecte el cable de alimentación suministrado. Anslut den medlevererade nätkabeln. 2 Turn on the main power switch. Schalten Sie den Hauptnetzschalter ein. Enfoncer l'interrupteur d'alimentation général. Accendete l´interruttore principale. Active el interruptor de alimentación principal. Slå på huvudströmbrytaren. Turn on the projector. Schalten Sie den Projektor ein. Allumer le projecteur. Accensione del proiettore. Encienda el proyector. Slå på strömmen till projektorn. Select a source. Auswählen einer Quelle. Sélectionner une source. Selezione di una fonte. Selección de una fuente. Välja en källa. Connect your computer to the projector. Schließen Sie ihren Computer an den Projektor an. Connecter l’ordinateur au projecteur. Collegate il vostro computer al proiettore. Conectar el ordenador al proyector. Anslut din dator till projektorn. VT695/VT595/VT590/VT490/VT59/VT49 Quick Setup Guide VT695/VT595/VT590/VT490/VT59/VT49 Quick Setup Guide VT695/VT595/VT/VT590/VT490/VT59/VT４９480/VT58/VT57/VT48 Quick Setup Guide OCUS F ME U N SELECT LAMP STATUS POWER ON/STAND BY SOURCE AUTO ADJ. ENTER EXIT STATUS LAMP POWER 2 1 SELECT MENU ENTER EXIT LAMP STATUS POWER ON/STAND BY AUTO ADJ. SOURCE ENTER EXIT MENU UP MAGNIFY PAGE OFF POWER ON PIC-MUTE DOWN SELECT MENU ENTER EXIT LAMP STATUS POWER ON/STAND BY AUTO ADJ. SOURCE VOLUME L-CLICK MOUSE R-CLICK AUTO ADJ. ASPECT HELP FREEZE PICTURE S-VIDEO VIDEO COMPUTER 2 LAMP MODE 1 Remove the lens cap. Nehmen Sie die Linsenkappe ab. Retirer le cache-objectif. Rimuovete il copriobiettivo. Quite la tapa de la lente. Ta bort linsskyddet. MENU SELECT LAMP STATUS POWER ON/STAND BY SOURCE AUTO ADJ. ENTER EXIT FOCUS ZOOM TIP: Press the AUTO ADJ. button to optimize an RGB image automatically. TIPP: Drücken Sie zum automatischen Optimieren des RGB- Bildes die AUTO ADJ.-Taste. ASTUCE: Appuyer sur la touche AUTO ADJ. pour optimiser automatiquement une image RGB. SUGGERIMENTO: Premete il tasto AUTO ADJ. per ottimizzare automaticamente l’immagine RGB. SUGERENCIA: Pulse el botón de AUTO ADJ. para optimizar una imagen RGB automáticamente. TIPS: Tryck på AUTO ADJ.-tangenten för att optimera en RGB- bild automatiskt. Fn F1 F12 (→ page 13, 57 of the User’s Manual) SELECT MENU ENTER EXIT LAMP STATUS POWER ON/STAND BY AUTO ADJ. SOURCE VOLUME L-CLICK MOUSE R-CLICK ASPECT HELP FREEZE PICTURE AUTO ADJ. S-VIDEO VIDEO COMPUTER LAMP MODE 1 2 AUDIO OUT AUDIO IN MONITOR OUT (COMP 1) COMPUTER 1 IN COMPUTER 2 (DVI-I) IN AUDIO IN S-VIDEO IN VIDEO IN PC CTRL L R L COMPUTER IN MONITOR OUT AUDIO IN S-VIDEO IN VIDEO IN PC CONTROL R COMPUTER 1 IN COMPUTER IN VT695/VT595 VT590/VT490/VT59/VT49 VGA signal cable (supplied) VGA-Signalkabel (Lieferumfang) Câble de signal VGA (fourni) Cavo dei segnali VGA (in dotazione) Cable de señal VGA (suministrado) VGA-signalkabel (medföljer)

====================================================================== Control Commands for NEC Projector (Basic) Rev 3.0.30f Copyright (C) NEC Viewtechnology, Ltd. 2002-2006 ---------------------------------------------------------------------- Updated on November 09, 2007 ---------------------------------------------------------------------- This file contains information about NEC projector control commands. Model Name GT60 : GT5000/GT6000 Series HT : HT1000/HT1100 Series HT10 : HT410/HT510 Series LT : LT180 LT30 : LT25/LT30/LT35 Series NP40 : NP40/NP50/NP60 Series LT60 : LT220/LT240/LT240K/LT260/LT260K/LT245/LT265 Series LT80 : LT280/LT380 Series MT70 : MT860/MT1060/MT1065/MT1075 Series NP1000 : NP1000/NP2000/NP1150/NP2150/NP3150 Series WT : WT600/WT610/WT615 Series VT : VT770 Series VT70 : VT37/VT47/VT480/VT57/VT570/VT575/VT670/VT676 Series VT80 : VT48/VT480/VT580 Series VT90 : VT49/VT490/VT590/VT595/VT695/VT700 Series NP4000 : NP4000/NP4001 Series ====================================================================== Contents 1. Projector Control 2. Connection Method 3. Interface Conditions 4. List of Commands 5. Command Descriptions 6. Table of Response Error Codes ====================================================================== 1. Projector Control ---------------------------------------------------------------------- NEC projectors make use of control commands that control the functions of the projector via connection with a personal computer or another device. ====================================================================== 2. Connection Method ---------------------------------------------------------------------- The following 3 kinds of connection methods are available for sending and receiving control commands. 1. Serial connection using the serial port on the projector A serial cable is required.

Portable Projector VT695/VT595/VT590/VT490/VT59/VT49 User’s Manual