NEO NEOEDS01Z Quick start manual [PDF] (7 pages)
- Brand: NEO
- Model: NEOEDS01Z
- Format: PDF
- Updated: 25.03.2026
-
Neo Electronics Co Limited
1
-
What is Z-Wave?
2
-
Safety Warning for Batteries
3
-
5. Don’t poll FLIRS devices.
5
-
Size: 1 Byte, Default Value: 255
6
-
Controlled Command Classes
7
Document Preview & Text Transcription
Neo Electronics Co Limited
Door Sensor
SKU: NEOEDS01Z
Quickstart
This is a Alarm Sensor for Europe. To run this device please insert fresh 1 * CR2 batteries. Please
make sure the internal battery is fully charged.1.Remove the sensor cover.
2.Make sure the sensor is powered.
3.Set Z-Wave controller or Z-Wave gateway into inclusion mode (Refer to the controller or gateway
operating manual)
4.Press the button three times within 1.5 second, the device will enter inclusion mode. And the LED
will flash on and off alternately five times.
Pages Preview:
