Neoway M660 Manuals

Neo_M660 AT Command Set Version 3.7 Neoway Technology Co., Ltd. Let's enjoy the wireless life Neo_M660 AT Command Set Copyright © Neoway Technology Co., Ltd i Copyright © Neoway Technology Co., Ltd 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Shenzhen Neoway Technology Co., Ltd. is the trademark of Shenzhen Neoway Technology Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice This document provides guide for users to use the M660. This document is intended for system engineers (SEs), development engineers, and test engineers. The information in this document is subject to change without notice due to product version update or other reasons. Every effort has been made in preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Shenzhen Neoway provides customers complete technical support. If you have any question, please contact your account manager or email to the following email addresses: [email protected] [email protected] Website: http://www.neoway.com.cn Neo_M660 AT Command Set Copyright © Neoway Technology Co., Ltd ii Revision Record Issue Changes Date V3.0 Initial draft 2013-08-26 V3.1 Added the following commands: AT+OFFTIME, AT+FCHW, AT+AUDIN, AT+AUDOUT, AT+IFC, AT+RINGTIME, AT+TRANSCLOSE, AT+UDPTRANS, AT+TCPTRANS, and AT+RINGOUT. 2013-09-02 V3.2  Deleted the command AT+TRANSCLOSE and use +++ to exit the data mode.  Modified the default data format of the AT+DATAFORMAT command.  Modified usage description of +++.  Modified the description of AT+TCPSEND.  Modified the description of AT+TCPLPORT, AT+UDPLPORT, and AT+FTPPUT. 2013-09-17 V3.3 Added the echo suppression command AT+LESL 2013-10-09 V3.4  Modified the description of the following commands: +++ in the transparent mode, AT+CLOSECLIENT, AT+IPSTATUS, AT+TCPACK, and AT+CLIENTSTATUS.  Added the description of the ATO command in the transparent mode and AT+TRABSCLOSE command.  Added the description of the AT+REST and AT+CPWROFF commands. 2013-11-06 V3.5 Added the following commands: AT+TCPACKS, HTTP commands, AT+TCPSRVTRANS?, and ATE1/ATE0. 2013-11-29 V3.6  Modified the terminal display after the client is connected to the server (transparent/non-transparent transmission) and the description of the AT+TCPLPORT, AT+UDPLPORT, and AT+HANDFEE commands.  Added SMTP commands: AT+SMTPSRV, AT+SMTPAUTH, AT+SMTPFROM, AT+SMTPRCPT, AT+SMTPSUB, AT+SMTPBODY, and AT+SMTPSEND.  Added the AT+CNUM command to obtain my number and added the following commands: AT+POPSRV, AT+POPAUTH, AT+POPSTAT, AT+POPRSET, AT+POPDELE, AT+POPLIST, AT+POPRETR, and AT+POPQUIT. 2013-12-18 V3.7  Added eCall commands: AT%EMSD, AT%EMSDSET, AT+CECALL, AT%EMSDPUSH, etc. 2013-12-24 Neo_M660 AT Command Set Copyright © Neoway Technology Co., Ltd iii Contents Boot LOG Instruction ................................................................................................................. 1 1 General Commands ................................................................................................................. 2 1.1 Querying the Manufacturer: +CGMI ........................................................................................................... 2 1.2 Querying the Module Model: +CGMM ....................................................................................................... 2 1.3 Querying the Version: +CGMR .................................................................................................................... 2 1.4 Querying IMEI: +CGSN .............................................................................................................................. 3 1.5 Querying the IMSI: +CIMI .......................................................................................................................... 3 1.6 Obtaining the ICCID of the SIM Card: +CCID ........................................................................................... 4 2 Mobile Device Control and Status Report .......................................................................... 4 2.1 Querying the Module Status: +CPAS ........................................................................................................... 4 2.2 Querying the Network Registration Status: +CREG .................................................................................... 5 2.3 Setting Module Functions: +CFUN ............................................................................................................. 6 2.4 Enabling or Disabling the Sleep Mode: +ENPWRSAVE............................................................................. 7 2.5 Clock: +CCLK ............................................................................................................................................. 7 2.6 Setting the Baudrate of the Module: +IPR ................................................................................................... 8 2.7 Entering the PIN Codes: +CPIN .................................................................................................................. 8 2.8 Enabling PIN and Querying MT and Network Device: +CLCK .................................................................. 9 2.9 Modifying the Password of the PIN: +CPWD ........................................................................................... 10 2.10 Extended Error Report: +CEER ............................................................................................................... 11 2.11 Setting Error Information: +CMEE .......................................................................................................... 12 2.12 Setting the Signal Indicator Status: +SIGNAL ........................................................................................ 12 2.13 Enabling the Hardware or Software Flow Control Function: +IFC ......................................................... 13 2.14 Enabling & Disabling the Terminal Display: ATE1/ATE0 ....................................................................... 14 3 Network Service Commands ............................................................................................... 14 3.1 Querying Signal Quality: +CSQ................................................................................................................. 14 3.2 Selecting and Registering a GSM Network: +COPS ................................................................................. 15 4 Calling Control Commands ................................................................................................. 16 4.1 Setting the Speaker Volume: +CLVL ......................................................................................................... 16 4.2 Mute Control: +CMUT .............................................................................................................................. 17 4.3 Dialing Command: ATD ............................................................................................................................. 17 4.4 Call Answering: ATA ................................................................................................................................. 18 4.5 Hanging Up Calls: ATH ............................................................................................................................. 19 4.6 Caller ID: CLIP .......................................................................................................................................... 19 4.7 Sending DTMF Tone: +VTS ...................................................................................................................... 20 4.8 Auto-Answer:ATS0 .................................................................................................................................... 20 4.9 Handfree Switch: +HANDFREE ............................................................................................................... 21 4.10 Starting the DTMF Detection: +DTMFDETECT .................................................................................... 22 4.11 Setting Echo Suppression Level in the Earphone Mode: +ESL ............................................................... 22

M660 GPRS Module User Manual Shenzhen Neoway Technology Co.,Ltd. Enjoy your wireless life Shenzhen Neoway Technology Co., Ltd. Page 2 of 32 Copyright Copyright © 2008 Neoway Technology All rights reserved. is a trade mark of Shenzhen Neoway Technology Co., Ltd. Notice This document is intended for the customer engineers. This document is subject to change without any notice. No responsibility is assumed by Neoway Technology for the use of this document. Neoway Technology always provides the best supports. For pricing, ordering information and delivery please contact: [email protected] For any technical support requests please contact: [email protected] For further information please visit: http://www.neoway.com.cn Shenzhen Neoway Technology Co., Ltd. Page 3 of 32 Contents 1. Introduction ................................................................................................................................ 6 2. General Description ................................................................................................................... 6 3. Simplified Block Diagram ......................................................................................................... 6 4. Key Features ............................................................................................................................... 7 5. Product Specifications ............................................................................................................... 8 5.1 Variants ................................................................................................................................. 8 5.2 Dimension & Package ........................................................................................................... 8 5.3 Pin Description ...................................................................................................................... 9 5.4 PCB foot print ..................................................................................................................... 10 6. Application Interface ............................................................................................................... 11 6.1 Power Supply Requirements ............................................................................................... 11 6.1.1 Power Supply Basic Design Rules ........................................................................ 11 6.1.2 Extended Design Rules for Power Supply ............................................................ 13 6.2 ON/OFF Procedure ............................................................................................................. 15 6.2.1 Turning on the module .......................................................................................... 16 6.2.2 Turning off the module ......................................................................................... 16 6.2.3 RESET .................................................................................................................. 17 6.2.4 VCCIO .................................................................................................................. 17 6.3 UART .................................................................................................................................. 18 6.3.1 Basic Descriptions of UART ................................................................................. 18 6.3.2 Level Translators for UART .................................................................................. 18 6.4 Sleep mode .......................................................................................................................... 20 6.4.1 DTR ....................................................................................................................... 20 6.4.2 RING ..................................................................................................................... 21 6.5 SIM interface ...................................................................................................................... 21 6.6 Running LED Indicator ....................................................................................................... 23 6.7 Audio Interface ................................................................................................................... 24 6.8 Antenna Interface ................................................................................................................ 26 7. Mounting the Module onto the Application Board ............................................................... 28 8. Package ..................................................................................................................................... 29 Shenzhen Neoway Technology Co., Ltd. Page 4 of 32 9. Terms and Abbreviations ......................................................................................................... 29

Neo_M660 User Manual Version V1.0 Shenzhen Neoway Technology Co.,Ltd Neo_M660 User Manual V1.0 All rights reserved by Shenzhen Neoway Technology Co., Ltd Page 2 Total 11 Copyright Statement Copyright © 2008 Neoway Technology All rights reserved by Shenzhen Neoway Technology Co.,Ltd. The trademark belongs to Shenzhen Neoway Technology Co.,Ltd. Other trademarks in this manual belongs to their owners. Clarification This specification is for system engineer, research engineer and test engineer. As the upgrading of the product version or some other reasons, we’ll do some necessity updating to the content of this specification without advance notice. Unless we have other additional assumpsit, all statements, information and suggestions in this manual do not constitute any express or implied guarantees. Shenzhen Neoway Technology Co.,Ltd can supply all the technological support. If you have any problem, please feel free to contact to the sales representative or send E-mail to these two mailboxes: [email protected] [email protected] Website: www.neoway.com.cn All rights reserved by Shenzhen Neoway Technology Co., Ltd Page 2 Total 12 Neo_M660 User Manual V1.0 All rights reserved by Shenzhen Neoway Technology Co., Ltd Page 3 Total 11 Contents 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Figuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Character. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Pin Definition & Encapsulation . . . . . . . . . . . . . . . . . . . . . . . . . 8 5.1 Pin Definition ...........................................................................8 5.2 PCB Packaging .......................................................................9 6 General AT Commends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7 Call Control Commends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8 TCP/UDP AT Commends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 9 Assembling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 All rights reserved by Shenzhen Neoway Technology Co., Ltd Page 3 Total 12