NetComm V210P Manuals

Quick Start Guide V110, V210P, V211, V220 VoIP ATA Want to network your home quickly and easily without any hassles? NetComm HomePlugs are the simplest method available to set up a home network, without any of the hassle of laying meters of cable or drilling holes into walls. Simply put, a NetComm HomePlug turns the existing electrical wiring in your home into a network capable of transmitting data at up to 200Mbps. Setting up a network couldn’t be easier. Simply plug a Homeplug into an available power socket near a computer, attach it to the computer with a short ethernet cable. Then plug in and connect a second homeplug with your second home computer and that’s it, you’ve successfully networked two computers. HomePlugs are extremly versatile and suit any number of tasks - • Internet sharing and On-line Gaming - Connect your broadband modem to a HomePlug and then every other PC or ethernet capable gaming console on your HomePlug network can access your internet connection • Wireless Access Point - With a Wireless HomePlug you can create a wireless access point anywhere you want • VoIP - Place a VoIP ATA anywhere in your home for big savings on your phone bill • Home Entertainment - Stream high-def movies, audio or photos from a media server to set-top boxes or HTPCs Another added bonus of a Homeplug network is that it moves with you. If you’re moving home or apatments, or simply doing some redecorating and need to move your PC, you can take your HomePlug with you and have your network up and running again in seconds. Try doing that with cables embedded in the wall! And as your network grows, HomePlugs make it easy to add new network points, simply plug in a new HomePlug and you’re ready to go. Grab your NetComm HomePlug today, either: Buy Online http://www.netcomm.com.au/EOP/ and click on the Buy Now button Purchase by Phone Tel – (02) 9424-2055 (Quote Ref - Home-2) YML882Rev1 �11��� �21���� �211�� �22� �11��� �21���� �211�� �22� Quick Start Guide www.netcomm.com.au 3 WElCOmE tO tHE WONdErful WOrld Of VOIP Congratulations on your purchase of a NetComm VoIP AtA. Whether this is your first VoIP device or you are upgrading from another device we’re glad to have you as part of the NetComm family. The NetComm V110/V210P/V211/V220 ATA’s are true next generation technology and in addition to the fantastic savings you’re going to experience you’ll also get fantastic features such as routing, T.38 Fax and 3 way conferencing. This Quick Start Guide contains everything you need to get you up and running for everyday use but if you need to delve into any of the more advance configuration features available on your unit you’ll find a comprehensive user Guide on the Cd that accompanies the ATA. Should you run into any problems with your unit (and let’s face it, we all need a little help from time to time) you can find the answers to many questions in the support section of our website www.netcomm.com.au/Support/ So without any further delay it’s time to get you more familiar with your ATA so you can start using VoIP. IMPORTANT NOTICE: Please ensure that the Broadband modem/router to be use with this ATA had been designed to handle VoIP traffic. Most new broadband modem/router will be able to handle VoIP without any issues and does not need extra configuration to handle VoIP service. However, old broadband modem/router might need to be configured correctly to supports it. Please check with the broadband modem/router manufacturers for more details. �11��� �21���� �211�� �22� Quick Start Guide YML882Rev1 4 www.netcomm.com.au Ports and Buttons �11� (WAN + 1 LAN + 1 FXS) �22� (WAN + 1 LAN + 2 FXS) �211 (WAN + 1 LAN + 1 FXO +1 FXS) �21�� (WAN + 1 LAN + 1 �STN pass through +1 FXS) Port / Button description Power Connect the supplied power adapter to the ATA. The power requirement is DC12 volts/0.6 A Note: Using a power supply with a different voltage rating will damage this product Power Switch Power on/off the NetComm ATA. WAN Port Connect to Broadband devices, such as an ADSL or Cable modem. lAN Port Connect to Ethernet network devices, such as a PC, switch, or router. Depending on the connection, you may need a cross over cable or a straight through cable rESEt The Reset button will set the NetComm ATA to its factory default setting and reset the unit. You may need to reset the NetComm ATA into its factory defaults if you loose the ability to enter the NetComm ATA via the web interface, or following a software upgrade. lINE Socket Connect a telephone cable between the NetComm ATA line jack and a wall jack. PHONE Socket Connect a standard telephone handset to the NetComm ATA phone jack using a telephone cable.

User Guide V110, V210P, V211, V220 VoIP ATA YML881Rev1 �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide www.netcomm.com.au 3 Welcome to the WonderfUl World of VoIP congratulations on your purchase of a netcomm VoIP AtA. Whether this is your first VoIP device or you are upgrading from another device we’re glad to have you as part of the NetComm family. The NetComm V110/V210P/V211/V220 ATA’s are true next generation technology and in addition to the fantastic savings you’re going to experience you’ll also get fantastic features such as routing, T.38 Fax and 3 way conferencing. This Quick Start Guide contains everything you need to get you up and running for everyday use but if you need to delve into any of the more advance configuration features available on your unit you’ll find a comprehensive User Guide on the cd that accompanies the ATA. Should you run into any problems with your unit (and let’s face it, we all need a little help from time to time) you can find the answers to many questions in the support section of our website www.netcomm.com.au/Support/ So without any further delay it’s time to get you more familiar with your ATA so you can start using VoIP. IMPORTANT NOTICE: Please ensure that the Broadband modem/router to be used with this ATA has been designed to handle VoIP traffic. Most new broadband modem/router will be able to handle VoIP without any issues and do not need extra configuration to handle VoIP service. However, old broadband modem/router might need to be configured correctly to support it. Please check with the broadband modem/router manufacturers for more details. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 4 www.netcomm.com.au VoIP AtA feAtUreS network Protocol tone • SIP v1 (RFC2543), v2(RFC3261) • Ring Tone • IP/TCP/UDP/RTP/RTCP • Ring Back Tone • IP/ICMP/ARP/RARP/SNTP • Dial Tone • TFTP Client/DHCP • Busy Tone • Client/ PPPoE Client • Programming Tone • Telnet/HTTP Server • DNS Client • NAT/DHCP Server codec Phone function • G.711: 64k bit/s (PCM) • Volume Adjustment • G.723.1: 6.3k / 5.3k bit/s • Speed dial key • G.726: 16k / 24k / 32k / 40k bit/s (ADPCM) • Phone book • G.729A: 8k bit/s (CS-ACELP) • Flash • G.729B: adds VAD & CNG to G.729 Voice Quality call function • VAD: Voice activity detection • Call Hold • CNG: Comfort noise generator • Call Waiting • LEC: Line echo canceller • Call Forward • Packet Loss Compensation • Caller ID • Adaptive Jitter Buffer • 3-way conference IP Assignment Auto Provisioning • Static IP • HTTP • DHCP • FTP • PPPoE • TFTP dtmf function nAt traversal • In-Band DTMF • STUN • Out-of Band DTMF • SIP Info SIP Server configuration • Registrar Server • Web Browser • Outbound Proxy • IVR/Keypad

NETCOMM 210P VoIP ATA CONNECTION GUIDE WElCOME TO ClUbTElCO We have pre-configured your ATA (Analog Telephone Adaptor) for you - just follow these steps to start using your ClubTelco VoIP service. STEP 1 - CONNECT ThE ATA TO yOUr PC Connect an Ethernet Cable to the back of your computer and the other end of the cable to the port labelled LAN on the back of the ATA. STEP 2 - CONNECT ThE ATA TO yOUr MODEM Connect another Ethernet Cable to the LAN (Ethernet) port on your modem/router and then the other end of the cable to the WAN port on the back of the ATA. STEP 3 - CONNECT ThE ATA TO yOUr PhONE Once you have plugged the ATA into the computer and modem, connect a standard Telephone Cable from the port labelled Phone on the ATA and the other end of that cable to the phone you wish to use to make your calls. STEP 4 - CONNECT ThE ATA TO yOUr PhONE lINE Your final step is to connect another phone cable to the port labelled LINE and the other end of that cable to the LINE port on your ADSL Filter (this is sometimes called the PHONE port). IMPORTANT NOTICE 2 3 1 4 Before beginning use of your new ClubTelco VoIP service please be sure to make a test call to a phone that has calling number display (your mobile phone will suit). When you make the call, confirm that it is your new VoIP number that is displayed on the caller ID - if it is, then you are set up correctly and can begin using your new VoIP service. If your VoIP phone number is not displayed please contact ClubTelco Technical Support on 13 8352 ASAP for help setting up your device. ClubTelco will not take any responsibility for PSTN call costs incurred from incorrect set up of you ATA device Congratulations you are now ready to start using your ClubtelCo VoiP serViCe!

NetComm V210P Two Phone port VoIP Adaptor V210P VoIP technology NetComm’s V210P VoIP Telephone Adaptor has been designed for residential and small business users to deliver predictable real-time voice quality over the Internet. It connects directly to any broadband modem and service (Cable or DSL) plus an account with a VoIP Service Provider. Suitable for those who want the convenience of a landline (PSTN) combined with the savings of VoIP in one compact unit. The V210P delivers both VoIP and landline calls to a single handset, giving you the cost savings of VoIP with the security of a landline backup if and when you need it. The V210P also features QoS functionality to maintain call quality. KEY FEATURES Make and receive VoIP calls from a single telephone handset Landline backup in the event of a failure with your VoIP Service 1 FXS, 1 FXO port and 1 LAN port Simple web-based setup and configuration Supports advanced Call services – Caller ID, Call On-Hold, Call Forward, Call Waiting and Transfer – service provider dependent* *Note: The availability of some listed call features are dependent on the service supported by your VoIP service provider. Please consult them for further information. NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia P: 02 9424 2070 F: 02 9424 2010 E: [email protected] W: www.netcomm.com.au Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product. NetComm V210P Two Phone port VoIP Adaptor TECHNICAL SPECIFICATIONS NETWORK PROTOCOL • SIP v1 (RFC2543), v2(RFC3261) • IP/TCP/UDP/RTP/RTCP • IP/ICMP/ARP/RARP/SNTP • TFTP Client/DHCP • PPPoE Client • HTTP Server • DNS Client • NAT/DHCP Server TONE • Ring Tone • Ring Back Tone • Dial Tone • Busy Tone • Programming Tone CODEC • G.711: 64k bit/s (PCM) • G.723.1: 6.3k / 5.3k bit/s • G.726: 16k / 24k / 32k / 40k bit/s (ADPCM) • G.729A: 8k bit/s (CS-ACELP) • G.729B: adds VAD & CNG to G.729 • GSM PHONE FUNCTION • Volume Adjustment • Speed dial key • Phone book • Flash VOICE QUALITY • VAD: Voice activity detection • CNG: Comfortable noise generator • LEC: Line echo canceller • Packet Loss Compensation • Adaptive Jitter Buffer IP ASSIgNMENT • Static IP • DHCP • PPPoE CALL FUNCTION • Call Hold • Call Waiting • Call Forward • Caller ID • 3-way conference SECURITY • HTTP 1.1 basic/digest authentication for Web setup • MD5 for SIP authentication (RFC2069/RFC 2617) DTMF FUNCTION • In-Band DTMF • Out-of Band DTMF • SIP Info NAT TRAVERSAL • STUN SIP SERVER • Registrar Server • Outbound Proxy CONFIgURATION • Web Browser • IVR/Keypad FIRMWARE UPgRADE • TFTP • HTTP AUTO PROVISIONINg • HTTP • FTP • TFTP MODEM & FAx MODES • G.711 fax/modem pass-through with fax/modem detection • T.38 support INTERFACE • 1 WAN port interface • 1 LAN port interface • 1 FXS port interface • 1 FXO port interface Internet Broadband Router Desktop PC Phone Power Point Telephone Wall Socket

NETCOMM EXPRESS TM SERIES VoIP Adapter USER GUIDE VoIP Adapter User Guide YMLV2102 2 www.netcomm.com.au Table of Contents Introduction ...............................................................................................................................................................................................3 Welcome to VoIP ..............................................................................................................................................................................................................4 VoIP ATA Features ............................................................................................................................................................................................................5 Package Contents............................................................................................................................................................................................................6 Minimum System Requirements .......................................................................................................................................................................................6 Getting to KNow your VoIP Adapter .........................................................................................................................................................7 Ports and buttons ............................................................................................................................................................................................................8 LED Indicators..................................................................................................................................................................................................................8 Default Settings ................................................................................................................................................................................................................9 Restoring Factory Defaults ...............................................................................................................................................................................................9 Hardware Installation ........................................................................................................................................................................................................9 Basic Configuration ................................................................................................................................................................................10 Easy Setup Utility ...........................................................................................................................................................................................................11 Configuration via a web browser ....................................................................................................................................................................................12 WAN Configuration ..................................................................................................................................................................................................13 VoIP Configuration ...................................................................................................................................................................................................16 Advanced Configuration .........................................................................................................................................................................18 Status: ...........................................................................................................................................................................................................................20 Network ...................................................................................................................................................................................................................20 VoIP .........................................................................................................................................................................................................................20 Configuration..................................................................................................................................................................................................................20 WAN ........................................................................................................................................................................................................................20 LAN .........................................................................................................................................................................................................................21 VoIP .........................................................................................................................................................................................................................21 DDNS ......................................................................................................................................................................................................................38 VLAN .......................................................................................................................................................................................................................39 DMZ ........................................................................................................................................................................................................................39 Virtual Server ...........................................................................................................................................................................................................40 SNTP .......................................................................................................................................................................................................................42 Alarm Settings .........................................................................................................................................................................................................42 System Authority .....................................................................................................................................................................................................43 Save/Reboot............................................................................................................................................................................................................43 System ...........................................................................................................................................................................................................................43 Reset Factory Default ...............................................................................................................................................................................................43 Firmware Update .....................................................................................................................................................................................................43 Auto Update ............................................................................................................................................................................................................44 Interactive Voice Response ....................................................................................................................................................................45 IVR Interface...................................................................................................................................................................................................................46 How to make a phone call .......................................................................................................................................................................................47 Frequently Asked Questions ...................................................................................................................................................................48 Appendix ..................................................................................................................................................................................................50 Glossary .........................................................................................................................................................................................................................51 Legal & Regulatory .........................................................................................................................................................................................................52 Introduction VoIP Adapter User Guide YMLV2104 4 www.netcomm.com.au Welcome to the Wonderful World of VoIP Congratulations on your purchase of a NetComm VoIP ATA. Whether this is your first VoIP device or you are upgrading from another device we’re glad to have you as part of the NetComm family. The NetComm V210P/V220 ATA’s are true next generation technology and in addition to the fantastic savings you’re going to experience you’ll also get fantastic features such as routing, T.38 Fax and 3 way conferencing. This User Guide contains everything you need to get you up and running for everyday use and information if you need to delve into any of the more advance configuration features available on your unit. Should you run into any problems with your unit (and let’s face it, we all need a little help from time to time) you can find the answers to many questions in the support section of our website www.netcomm.com.au/Support/ So without any further delay it’s time to get you more familiar with your ATA so you can start using VoIP. IMPORTANT NOTICE: Please ensure that the Broadband modem/router to be used with this ATA has been designed to handle VoIP traffic. Most new broadband modem/router will be able to handle VoIP without any issues and do not need extra configuration to handle VoIP service. However, old broadband modem/router might need to be configured correctly to support it. Please check with the broadband modem/router manufacturers for more details.