NETGEAR AX764 Manuals

Installation The 10 Gigabit BASE-LR LITE SFP+ module transmits at 10 G bps over single mode fiber (SMF) for up to 2 Km. Install the Module NETGEAR switches automatically detect the AXM764 module. The module can be inserted or removed while the switch is powered on. ¾ ¾ To install a module: 1. Insert the module into one of the available SFP+ module slots, pressing firmly to seat the module. 2. Make sure that the module latch is in the closed position. 3. Connect a single-mode LC to LC duplex cable to the module. Remove the Module You do not need to power off the switch before removing the module. ¾ ¾ To remove a module: 1. Disconnect any cables from the module. 2. Pull down on the module latch. 3. Pull the module out of the module slot. Specifications Specifications Description Wavelength 1310nm Dimensions (H x W x D) .47 in. x .57 in. x 2.22 in. (11.85 mm x 14.55 mm x 56.50 mm) Weight 0.04 lb (20 g) Operating temperature 23 –158ºF (-5 – 85ºC) Storage temperature -40 – 185ºF (-40 –85ºC) Operative relative humidity 85% at 25ºC Operating Distance Up to 2Km on legacy 9/125μm single mode fiber cables. Connectors LC Max. power consumption 1.1W MTBF 2310,000 hours (264 years) Safety Certification FDA/CDRH, IEC-60825 Compliance RoHS ProSAFE 10 Gigabit BASE-LR LITE SFP+ Single Mode Module AX764