NETGEAR WNCE4004 Manuals

Installation Guide Wireless HD Video and Gaming Adapter (WNCE4004) Installation with WPS Step 2: Wait until the Link LED on the button WPS Step 3: Push the WPS button on your router. When the Step 1: Connect the WNCE4004 wireless connection has been established, the Link LED changes color to indicate the quality of the connection—solid green, solid amber, or solid red. See Link LED Activity on the reverse side of this document for more information about what these colors mean. to your TV, Xbox, or Blu-ray player with the Ethernet cable (included) and the power adapter. WNCE4004 blinks green. Press the WPS button on the WNCE4004. The WPS LED blinks blue to show that the WPS is running. Step 4: Congratulations! Your installation is complete. What is WPS? If you have a NETGEAR router, this feature is called Push 'N' Connect. Look for the or symbols on the router to make sure that the NETGEAR router supports WPS. For non-NETGEAR routers, refer to the user manual to determine if the router supports WPS. Once you know whether your router supports WPS, choose the appropriate installation method. WPS (Wi-Fi Protected Setup) is a simple and secured way to connect a device to an existing network. Installation without WPS Step 1: On the computer you will use to install the WNCE4004, disconnect its wireless connection to the router and/or remove any Ethernet cable currently connected to the computer. You can restore the connection after the WNCE4004 installation is complete. Step 2: Connect the WNCE4004 to your computer, using the Ethernet cable (included) and the power adapter. Step 3: Wait until the Link LED blinks green. Make sure that the computer gets the IP address. Then, open your Internet browser—it automatically takes you to the setup page. (If not, manually type http://www.mywifiext.net as the browser address.) The default user name is admin and the default password is password. Follow the instructions on the setup page, then return to this guide and continue to Step 4. Step 4: Disconnect the Ethernet cable from your computer. Step 5: Connect the WNCE4004 to your TV, xBox, or Blu-ray player. Step 6: Congratulations! Your installation is complete. button WPS NOTE: Make sure that you go through the connection settings on your TV, Xbox, or Blu-ray player after the WNCE4004 is configured and connected. If asked for the type of connection, make sure that Wired is selected. Link LED Ethernet ports button WPS Power jack Ethernet cable Power adapter WNCE4004 LED WPS

350 East Plumeria Drive San Jose, CA 95134 USA November 2012 202-11011-01 v1.0 Wireless HD Video and Gaming Adapter (WNCE4004) User Manual