New Easy Electronics CPT-JSS00-01 Manuals

Product Manual Product Name:Lithium-ion Jump Starter (rechargeable Lithium-ion battery) Model: CPT-JSS00-01 1.Specifications Weight 5.5KG (12.121bs) Product Dim. 320X180X220mm(12.6"X7.09"X8.66") Ternary Lithium Battery 12V/21AH CD Battery Cycle Life 500 Times(80% DOD) Instant Amp 1200A for 20 Milliseconds Cranking Amp 500A Con 5 Seconds than need to stop 2 Minutes) Using Cycles 20Times (?) Charger Spee. 14.4V/1.5A Full Charging Time 10-12H Cigar Lighter 12V/15A{1.1H MAX) Operating 0 °C„45 °C(Continuous Charge Temperature ) Temperature Range -20 °C„45 °C (Continuous Discharge Temperature) Storage -20 °C „ 60 °C {less than 1 month) Temperature Range -20 °C „ 40 °C (less than 3 months) -20 °C „ 25 °C (more than 12 months) Remarks: (!) The 18650 Lithium-ion battery for electric power tools; a) Once the jump starter was fully charged, it can be used to start the vehicles for 20 times. 2.Product Features: + Product Idle Life: > 2 years.(Do not need to be charged every 3 Month); + Product Shelf Life: :::;; 5.5 years.(To avoid the security problems caused by circuit aging ,after 5.5 years, the battery can not be charged and the product will lose it's function.); + Protection of Abuse: (All the following cases can guarantee the safety) Short circuit;12V reverse polarity; 24V high voltage access; 24 reverse polarity; + Originally battery preheating design makes it can work at -40 °C; + Drop Resistance: can be dropped from 1 Meter high; + ECG-Friendly: Contains no Lead, Mercury or Cadmium like other Lithium battery products. WARNING Before using the Jump starter, read and follow the instructions carefully. Also pay close attention to the cautionary statements on the vehicles battery and any other equipment you be using. If the car battery is exhausted, before you use the Jump Starter, please tum off all electrical equipments on the car, and then connect Jump Starter with car battery properly , the car battery will be charged to the appropriate voltage within 1 minutes, when heard "I'm Ready" , please start the car. + Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near the battery; + Do not allow metar to come in contact with the battery poles. It may spark or short-circuit the battery; + Remove any and all jewelry and watches when working with a Li-ion battery; + Do not use the jump starter in wet environments or in rainy Day. 3.1. Controls and Indicators: 1 . On/Off Switch 2 . Battery Status Button(Voltage/Temperature/Level) 3 . Digital Display 4 . Charger input outlet 5 . Warning Indicator 6 . 12V DC outlet 7 . DC outlet indicator 4. Using the "Booster" Function WARNING Ensure that it use on a 12 VOLT SYSTEM ONLY. 4.1 The right operation steps: 4.1.1 The first step: Turn on the Jump Starter, then connect the red positive(+) clamp to the battery positive(+) terminal and the black negative (-) clamp to the battery negative (-) terminal; 4.1.2 The Second Step: When you heard "I'm Ready" from the Jump Starter, try to start the vehicle; Remarks: + Do not try to start the vehicle for more than 5 seconds at a time; + If the engine does not start properly, wait for 2 minutes, during the waiting time , there will be a voice of "Please Wait " ,after hearing "I'm Ready", please try again; 4.1.3 After the vehicles engine starts, disconnect the clamps then turn off the Jump Starter and re-wrap the cables. 4.2 During using the Jump Starter you may heard the audible alarm, it may caused by the following wrong operation: 4.2.1 Connect the clamps to the battery before turn on the Jump Starter; 4.2.2 Connect to 6V ( Motorcycle Battery) or 24V (Truck Battery) Battery; 4.2.3 There is a reverse connection between positive and negative Poles; 4.2.4 If you had turn on the Jump Starter ,but do not connect to the vehicle battery, there's a warning alarm that means there's something wrong with the Jump Starter itself, please stop use the Jump Starter. 5. Charging with the AC adapter *** Before the first use, please charge the jump starter at least 12 hours. CAUTION 5.1. Use only the charger included with jump starter to recharge it. Non-standard products will shorten the life of the battery and void the warranty; 5.2 Turn on the Jump Starter and press button (1) to check the status of battery, if ® shows 10.SV and warning indicator ® shows a red flashing light at the same time, that means it need to be charged; 5.3 Plug the charger into 220V/110V AC power outlet and the connector into the charging jack @, the indicator@ will turn red, after it's fully charged it will turn Green; 5.4 During the charging , when heard an audible alarm ,please stop charging immediately and disconnect the charger; 5.5 If possible, recharge the jump starter battery after each use, and thereafter, charge it at least every 12-18 months. 6. Using the 12V DC Outlet 6.1 Turn on the Jump Starter; 6.2 Open the cover of cigarette lighter socket ® on the back of the Jump Starter; 6.3 Plug the jack plug of 12V electrical appliances into the cigarette lighter socket. Note: + If the indicator (j) is green, that means the charger can be used , if not , it will not work . *** After you used the DC OUTLET , you must turn off the Jump Starter. 7. Maintenance 7.1. Always inspect the power station before use to ensure the cables are in perfect condition and the clamps are clean and free from corrosion; 7.2. Keep your jump starter clean by wiping with a dry cloth; DO NOT use solvents as a cleaning agent. 7.3. Check the battery level of Jump Starter every 12-18 months to keep it at a good status.