Workshop manual [PDF] (41 pages)
- Updated: 16.04.2026
Document Preview & Text Transcription
THIS ALERT SYMBOL SIGNALS IMPORTANT MESSAGES INVOLVING YOUR SAFETY.
Read and heed carefully the safety instructions listed and follow the precautions recommended to
avoid potential risks and to safeguard your health and your safety.
You will find this symbol in the text of this Manual referred to the following key words:
W130/W130TC
WHEEL LOADER
Workshop Manual
Print N° 604.13.492.00 English
II - 2005
WARNING
Cautions directed to avoid improper repair interventions involving potential consequences for the
operator’s safety.
DANGER
These warnings qualify specifically potential dangers for the safety of the operator or other per-
sons directly or indirectly involved.
IMPORTANT NOTICE
All maintenance and repair interventions explained in this Manual must be performed exclusively by the Service
Organization of the Manufacturer, observing strictly the instructions explained using, whenever necessary, the
recommended specific tools.
Whoever performs the operations reported without following exactly the precautions is responsible on his own, for
the damages that may result.
Neither the Factory nor any Organizations in its Distribution Network, including but not limited to national, regional
or local distributors, are responsible for any liability arising from any damage resulting from defects caused by parts
and/or components not approved by the Factory for use in maintaining and/or repairing products manufactured or
merchandized by the Factory.
In any case, no warranty of any kind is made or shall be imposed with respect to products manufactured or mer-
chandized by the Factory, when failures are caused by the use of parts and/or components not approved by the
Factory.
Most accidents and injuries occurring in industry, on
the farm, at home or on the road, are caused by the
failure of some individual to follow simple and funda-
mental safety rules or precautions. For this reason,
MOST ACCIDENTS CAN BE PREVENTED by recog-
nizing the real cause and taking the necessary pre-
cautions, before the accident occurs.
Regardless of the care used in design and construc-
tion of any type of equipment, there may be conditions
that cannot be completely safeguarded against with-
out interfering with reasonable accessibility and effi-
cient operation.
A careful operator is the best insurance against acci-
dents. The complete observance of one simple rule
would prevent many thousands serious injuries each
year.
This rule is: Never attempt to clean, lubricate or adjust
a machine while it is in motion.
AVOID ACCIDENTS
WARNING
On machines having hydraulically, mechanically and/or cable
controlled equipment (such as showels, loaders, dozers,
scrapers etc.) be certain the equipment is lowered to the
ground before servicing, adjusting and/or repairing.
If it is necessary to have the equipment partially or fully raised
to gain access to certain items, be sure the equipment is suit-
ably supported by means other than the hydraulic lift cylin-
ders, cable and/or mechanical device used for controlling the
equipment.
Find manuals at https://best-manuals.com
Find manuals at https://best-manuals.com
SUMMARY
GENERALITIES.................................................... Section 0
ENGINE ................................................................ Section 1
TRANSMISSION................................................... Section 2
BRAKE SYSTEM.................................................. Section 3
STEERING SYSTEM ............................................ Section 4
BUCKET BOOMS AND FRAME .......................... Section 5
EQUIPMENT HYDRAULIC SYSTEM ................... Section 6
ELECTRICAL SYSTEM ........................................ Section 7
CAB ...................................................................... Section 8
Find manuals at https://best-manuals.com
Find manuals at https://best-manuals.com
Pages Preview: