Newport i/8 Manuals

SPECIFICATION Accuracy: +0.5°C temp; 0.03% rdg. process typical Resolution: 1°/0.1°; 10 µV process Temperature Stability: 0.04°C/°C RTD; 0.05°C/°C TC @ 25°C (77°F); 50 ppm/°C process Display: 4-digits, 9-segments LED, 21 mm (0.83") with red, green and amber programmable colors Input Types: Thermocouple, RTD, Analog Voltage and Current TC: J, K, T, E, R, S, B, C, N, L RTD: 100/500/1000 ohm Pt sensor 2-, 3-, or 4-wire; 0.00385 or 0.00392 curve Input Impedance: 10 MΩ for 100 mV 1 MΩ for 1 or 10 Vdc Voltage: 0 to 100 mV (+50 mV), 0 to 1 V, 0 to 10 Vdc Current: 0 to 20 mA (5 Ω load) Output 1: (Control/Alarm Output) Relay 250 Vac @ 3 A Resistive Load, SSR, Pulse, Analog Voltage and Current Output 2: (Alarm Output) Relay 250 Vac @ 3 A Resistive Load, SSR, Pulse Output 3: (Retransmission) Isolated Analog Voltage and Current Current: 10 V max @ 20 mA output Voltage: 20 mA max for 0 - 10 V output Options: Communication RS-232 / RS-485 or Excitation: 24 Vdc @ 25 mA Not available for Low Power Option Line Voltage/Power: 90 - 240 Vac ±10%, 50 - 400 Hz*, or 110 - 375 Vdc, 5 W * No CE compliance above 60 Hz Low Voltage Power Option: 20 - 36 Vdc power option, 4 W** ** Units can be powered safely with 24 Vac but No Certification for CE/UL are claimed. Dimensions: 48 H x 96 W x 127 D mm (1.89 x 3.78 x 5") Weight: 295 g (0.65 lb) Approvals: UL, CE per EN50081-1, EN50082-2, EN61010-1 MQS3565/N/0701 i/8 Temperature/Process Controller with Isolated Analog Output Board a d d d d a a a a a a a a a a d a a Below is a flowchart showing how to navigate through all top level menus by pressing the d and a buttons. _____Underline denotes factory default setup FLOW CHART DISPLAY COLOR SETUP (examples) Example 1: Output 1 & Output 2: SSR Alarm setup: Absolute, Above, Alarm 2 HI Value "ALR.H" =200, Alarm 1 HI Value "ALR.H"=400 Color Display setup: Normal Color "N.CLR"=Green, Alarm 1 Color "1.CLR"=Amber, Alarm 2 Color "2.CLR"=Red Display color change sequence: GREEN | RED | AMBER •-®----------------•-----------------------•--------------------------------® 0 AL2.H=200 AL1.H=400 Example 2: Output 1: Relay, Set Point 1 = 200, Output 2: Relay, Set Point 2 = 200 Alarm 1 setup: Deviation, Band, "ALR.H" = 20 Alarm 2 setup: Deviation, Hi/Low, "ALR.H = 10", "ALR.L = 5" Color Display setup: "N.CLR"=Green, "1.CLR"=Amber, "2.CLR"=Red Display color change sequence: AMBER | RED | GREEN | GREEN | RED | AMBER •-®--------•----------•--------------•--------------•----------•------------® 0 180 195 200 210 220 INPUT MENU SETUP (operation example) Below is a flowchart showing how to navigate through the submenus of Input menu item by pressing the front buttons. d b b d d b • • • b d b • • • b d d d b • • • b d d b • • • b d a a For immediate technical or application assistance please call: Newport Electronics, Inc. 2229 South Yale Street • Santa Ana, CA • 92704 • U.S.A. TEL: (714) 540-4914 • FAX: (714) 546-3022 Toll Free: 1-800-639-7678 • http://www.newportUS.com • e-mail:[email protected] ISO 9001 Certified Newport Technologies, Inc. 976 Bergar • Laval (Quebec) • H7L 5A1 • Canada TEL: (514) 335-3183 • FAX: (514) 856-6886 Toll Free: 1-800-639-7678 • http://www.newport.ca • e-mail:[email protected] Newport Electronics, Ltd. One Omega Drive • River Bend Technology Centre Northbank, Irlam • Manchester M44 5BD • United Kingdom Tel: +44 161 777 6611 • FAX: +44 161 777 6622 Toll Free: 0800 488 488 • http://www.newportuk.co.uk • e-mail:[email protected] Newport Electronics B.V. Postbus 8034 • 1180 LA Amstelveen • The Netherlands TEL: +31 20 3472121 • FAX: +31 20 6434643 Toll Free: 0800 0993344 • http://www.newport.nl • e-mail: [email protected] Newport Electronics spol s.r.o. Rudé armády 1868, 733 01 Karviná 8 • Czech Republic TEL: +420 69 6311899 • FAX: +420 69 6311114 Toll Free: 0800-1-66342 • http://www.newport.cz • e-mail: [email protected] Newport Electronics GmbH Daimlerstrasse 26 • D-75392 Deckenpfronn • Germany TEL: 49 7056 9398-0 • FAX: 49 7056 9398-29 Toll Free: 0800 / 6397678 • http://www.newport.de • e-mail: [email protected] Newport Electronique S.A.R.L. 9, rue Denis Papin • 78190 Trappes • France TEL: +33 130 621 400 • FAX: +33 130 699 120 Toll Free: 0800-4-06342 • http://www.newport.fr • e-mail: [email protected] Mexico and Latin America TEL: 001-800-826-6342 • FAX: 001 (203) 359-7807 En Español: 001 (203) 359-7803 It is the policy of NEWPORT to comply with all worldwide safety and EMC/EMI regulations that apply. NEWPORT is constantly pursuing certification of its products to the European New Approach Directives. NEWPORT will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct, but NEWPORT Electronics, Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications without notice. TRADEMARK NOTICE: , NEWPORT ® , NEWPORT ® , and the “Meter Bezel Design” are Trademarks of NEWPORT ELECTRONICS, INC. This device is marked with the international caution symbol. It is important to read the Setup Guide before installing or commissioning this device, as the guide contains important information relating to safety and EMC. WARNING: These products are not designed for use in, and should not be used for, patient- connected applications. WARRANTY/DISCLAIMER NEWPORT Electronics, Inc. warrants this unit to be free of defects in materials and workmanship for a period of one (1) year from the date of purchase. In addition to NEWPORT’s standard warranty period, NEWPORT Electronics will extend the warranty period for four (4) additional years if the warranty card enclosed with each instrument is returned to NEWPORT. If the unit malfunctions, it must be returned to the factory for evaluation. NEWPORT’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by NEWPORT, if the unit is found to be defective, it will be repaired or replaced at no charge. NEWPORT’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of NEWPORT’s control. Components which wear are not warranted, including but not limited to contact points, fuses, and triacs. NEWPORT is pleased to offer suggestions on the use of its various products. However, NEWPORT neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by NEWPORT, either verbal or written. NEWPORT warrants only that the parts manufactured by it will be as specified and free of defects. NEWPORT MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of NEWPORT with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall NEWPORT be liable for consequential, incidental or special damages. CONDITIONS: Equipment sold by NEWPORT is not intended to be used, nor shall it be used: (1) as a "Basic Component" under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, or used on humans, or misused in any way, NEWPORT assumes no responsibility as set forth in our basic WARRANTY/DISCLAIMER language, and, additionally purchaser will indemnify NEWPORT and hold NEWPORT harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner. RETURN REQUEST/INQUIRIES Direct all warranty and repair requests/inquiries to the NEWPORT Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO NEWPORT, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM NEWPORT’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence. The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit. FOR WARRANTY RETURNS, FOR NON-WARRANTY REPAIRS, please consult NEWPORT for current have the following information available repair BEFORE contacting NEWPORT: charges. Have the following information available BEFORE contacting NEWPORT: 1. Purchase Order number under which 1. Purchase Order number to cover the the product was PURCHASED, COST the repair, 2. Model and serial number of the 2. Model and serial number of product, product under warranty, and and 3. Repair instructions and/or specific 3. Repair instructions and/or specific problems relative to the product. problems relative to the product. NEWPORT’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering. NEWPORT is a registered trademark of NEWPORT Electronics, Inc. © Copyright 2001 NEWPORT Electronics, Inc. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of NEWPORT Electronics, Inc. PATENT NOTICE: This product is covered by one or more of the following patents: U.S. Pat. No. Des. 336,895; 5,274,577; 6,243,021 / Canada 2052599; 2052600 / Italy 1249456; 1250938 / France Brevet No. 91 12756 / Spain 2039150; 2048066 / UK Patent No. GB2 249 837; GB2 248 954 / Germany DE 41 34398 C2. The ™ is a Trademark of OMEGA Engineering, Inc. USED UNDER LICENSE. Other U.S. and International patents pending or applied for.