Nice SUMO Manuals

3 pdf manual(s) Nice SUMO for free download (Document Types: Instructions and warnings for installation and use, Instructions and warnings for the fitter)

Nice SUMO Instructions and warnings for installation and use [PDF] (56 pages)

  • Identifier: id-1012457
  • Brand: Nice
  • Device: SUMO Garage Door Opener
  • Type: PDF
  • Key Aspects: Glossary of Technical Terms, Emergency Shutdown Procedures, Hardware Verification Checklists
  • UPD Date: 21.08.2026
  • Source File: 1146027.pdf
  • Pages: 56
  • Description: Instruction reference guide for the Nice SUMO.
Pages Preview:
  • 1 110 55 18 ÷ 245mm 9,7 219 88 73 ÷ 300mm 88 350mm 270mm 28,4mm 15 ÷ 95mm 70 ÷ 150mm ø 25,5 6 2 60
  • 1 EN Table of contents: page page 4 Manual manoeuvre or release 5 1 Product description 2 2 Installation 2 5 Testing 5 2.1 Preliminary checks 2 2.2 Typical system layout 2 2.3 Installing Sumo (standard procedure) 3 2.4 Installing Sumo with vertical chain 3 2.5 Installing Sumo with horizontal chain 3 2.6 Electrical connections 4 6 Maintenance 5 6.1 Disposal 5 7 Technical specifi cations 6 Instructions and warnings for users of the SUMO gear motor 7 3 Insta
  • 2 2.2) Typical system layout 1. Column 6. Aerial 2. Photocell 3. Key switch or digital keypad 4. Release knob 5. Flashing light 7. SUMO 8. Power line 9. Mechanical travel stops 10. A924 control unit 3 SUMO is an electromechanical actuator for automating the movement of sectional doors and two-wing sliding doors (fi g. 3-11). The cable outlet shaft makes it easy to connect the spring holder shaft to most of the sectional doors available on the market. As w
  • 3 2.3) Installing SUMO (standard procedure)* 1. Use a Philips screwdriver to unscrew the 3 screws of the mobile cover and remove it (fi g. 4). 2. Thread the wire through the cable holder (fi g. 5). 3. Knock out the two aluminium plates and insert the two cable holders (21) (fi g. 6). 4a. Lower the release lever with one hand (5). 4b. Block the lever with the bolt (14). (fi g. 7). 5. After identifying on which side the gear motor must be installed, proc
  • 4 3) Installing the release device Phase 2: 1. Open the bolt (14) and move the release handle (5) to the initial position; 2. close the cover (3); 3. unwind the sheath (max. L 6.5m) along the wall making sure to keep it straight so that the metal cable can slide easily inside the sheath; 4. insert the clamp (69) into the metal cable; 5. connect the release knob (43) to the metal cable, remove any excess if necessary; 6. adjust the fi xing height of the cl
Document Preview & Text Transcription (Main Page)
Click to expand and read text
EN - Instructions and warnings for installation and use IT - Istruzioni ed avvertenze per l’installazione e l’uso FR - Instructions et avertissements pour l’installation et l’utilisation ES - Instrucciones y advertencias para la instalación y el uso DE - Installierungs-und Gebrauchsanleitungen und Hinweise PL - Instrukcje i ostrzeżenia do instalacji i użytkowania Sumo Garage door opener

Nice SUMO Instructions and warnings for the fitter [PDF] (16 pages)

  • Identifier: id-1499305
  • Brand: Nice
  • Device: SUMO Door Opening System
  • Type: PDF
  • Key Aspects: Recommended Spare Parts List, Additional Modules and Accessories Guide, Cleaning and Sanitization Methods
  • UPD Date: 06.08.2026
  • Source File: 1499124.pdf
  • Pages: 16
  • Description: Usage and setup manual for the Nice SUMO.
Pages Preview:
  • sumo Important information Congratulations on choosing this Nice product. Please read this handbook carefully. To make these instructions easier to follow, we have, wherever possible, put them in the order in which they will be carried out during the various system installation phases. Please read these instructions and the attached “Warnings for fitters” file carefully before installing the product as they contain important information concerning safe
  • 2.2) Typical system layout 1. Column 2. Photocell 3. Key switch or digital keypad 4. Release knob 5. Flashing light 6. Aerial 7. SUMO 8. Power line 9. Mechanical travel stops 10. A924 control unit 1) Product description SUMO is an electromechanical actuator for automating the movement of sectional doors and two-wing sliding doors (fig. 3-11). The cable outlet shaft makes it easy to connect the spring holder shaft to most of the sectional doors available on
  • 2.3) Installing SUMO (standard procedure)* 1. Use a Philips screwdriver to unscrew the 3 screws of the mobile cover and remove it (fig. 4). 2. Thread the wire through the cable holder (fig. 5). 3. Knock out the two aluminium plates and insert the two cable holders (21) (fig. 6). 4a. Lower the release lever with one hand (5). 4b. Block the lever with the bolt (14). (fig. 7). 5 After identifying on which side the gear motor must be installed, proceeding as i
  • 2.6) Electrical connections The power unit must not be powered during this operation. Thread the power cable and the encoder cable respectively through the central and the right-hand cable holders. Connect the three-pole power cable (3x2.5)* to terminals 1 – 2 , keeping the earth wire insulated. Connect the two-wire cable (2x0.75) to terminals 3 – 4 (encoder). Tighten the cable holder to prevent the cables from being torn from the terminal board. (Plea
  • Models SU2000 – SU2010 Pull the knob downwards to position 1. Move the door by hand. (Figs. 16 - 16a) The release device must only work when the door is stopped. To programme and adjust anti-squash torque, please see the instructions of the A924 control unit. 4) Manual manoeuvre or release The whole system must be tested by qualified and expert staff who must perform the tests required, according to the level of risk. To test SUMO, proceed as follows:
Document Preview & Text Transcription (Main Page)
Click to expand and read text
gearmotor for sectional doors sliding doors with two bi parting sliding door sumo istruzioni ed avvertenze per l’installatore Instructions and warnings for the fitter Instructions et recommandations pour l’installateur Anweisungen und Hinweise für den Installateur Instrucciones y advertencias para el instalador Instrukcja instalowania

Nice SUMO Instructions and warnings for the fitter [PDF] (56 pages)

  • Identifier: id-1012456
  • Brand: Nice
  • Device: SUMO Garage Door Opener
  • Type: PDF
  • Key Aspects: Emergency Shutdown Procedures, Detailed Installation Instructions, Advanced Configuration Methods
  • UPD Date: 27.08.2026
  • Source File: 1146028.pdf
  • Pages: 56
  • Description: Product operation guide for the Nice SUMO.
Pages Preview:
  • 110 270mm 350mm 219 60 55 88 88 9,7 6 ø 25,5 28,4mm 18 ÷ 245mm 73 ÷ 300mm 15 ÷ 95mm 70 ÷ 150mm 1 2
  • sumo Important information Congratulations on choosing this Nice pr oduct. Please r ead this handbook carefully. To make these instructions easier to follow, we have, wherever possible, put them in the order in which they will be car ried out during the various system installation phases. Please read these instr uctions and the attached “Warnings for fitters” file carefully before installing the product as they contain impor tant information concer nin
  • 2 2.2) Typical system layout 1. Column 2. Photocell 3. Key switch or digital keypad 4. Release knob 5. Flashing light 6. Aerial 7. SUMO 8. Power line 9. Mechanical travel stops 10. A924 control unit 1) Product description SUMO is an electr omechanical actuator for automating the movement of sectional doors and two-wing sliding doors (fig. 3-11). The cable outlet shaft makes it easy to connect the spring holder shaft to most of the sectional doors available
  • 3 GB 2.3) Installing SUMO (standard procedure)* 1. Use a Philips scr ewdriver to unscr ew the 3 scr ews of the mobile cover and remove it (fig. 4). 2. Thread the wire through the cable holder (fig. 5). 3. Knock out the two aluminium plates and inser t the two cable holders (21) (fig. 6). 4a. Lower the release lever with one hand (5). 4b. Block the lever with the bolt (14). (fig. 7). 5 After identifying on which side the gear motor must be installed, pr oce
  • 4 2.6) Electrical connections The power unit must not be powered during this operation. Thread the power cable and the encoder cable r espectively through the central and the right-hand cable holders. Connect the three-pole power cable (3x2.5)* to ter minals 1 – 2 , keeping the ear th wir e insulated. Connect the two-wir e cable (2x0.75) to ter minals 3 – 4 (encoder). Tighten the cable holder to prevent the cables fr om being torn from the terminal boa
Document Preview & Text Transcription (Main Page)
Click to expand and read text
gearmotor for sectional doors sliding doors with two bi parting sliding door sumo istruzioni ed avvertenze per l’installatore Instructions and warnings for the fitter Instructions et recommandations pour l’installateur Anweisungen und Hinweise für den Installateur Instrucciones y advertencias para el instalador Instrukcja instalowania

Nice SUMO: Door Opening System, Garage Door Opener Category Related Instructions

Comfort 850
Marantec Comfort 850
15.08.2026 32 pages

Operating instructions Last updated: 01.2014 Operator system for Sliding Gates Comfort 850, 851 GB Step-by-step user manual for the Marantec Comfort 850 Garage Door Opener. The document guides users through safety, device instructions, installation steps.

Controll-A-Door P Diamond
B&D Controll-A-Door P Diamond
01.05.2026 2 pages

Sectional Door Opener SDO 2V2 Tri-Tran+ Installation Instructions Controll-A-Door ® P Diamond 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Kit Contents 1. 1 x SDO-2 drive unit 2. 1 x Wall mount transmitter with battery and screws 3. 2 x Transmitters and batter User support manual for the B&D Controll-A-Door P Diamond Garage Door Opener. This manual outlines installation steps and power requirements, device features, troubleshooting.

INTELLICODE 1
GMI INTELLICODE 1
08.04.2026 2 pages

STEP3: OPERATINGONEDOOROPENER To open or close the Garage Door. • Enter your PIN. • Press . STEP2: Find the Learn Code Button and Learn Code Indicator LED on your door opener. – – If your Door Opener does not have an Antenna, you ha Owner’s guide for the GMI INTELLICODE 1 Garage Door Opener. The guide covers usage and product specifications, assembly reference, maintenance guidelines.

311/GL124EBSS
Cardin Elettronica 311/GL124EBSS
15.03.2026 60 pages

1 ATTENTION! Before installing this device read the following instructions carefully! Installation example Page 2 Wiring diagram Page 3 Important remarks Page 15 Installation instructions Pages 15-17 Electronic programmer Pages 17-18 Programming procedure Page Service manual for the Cardin Elettronica 311/GL124EBSS Garage Door Opener. This documentation details procedures for safety features, safety, safety protocols, product specifications.