-
Read all precautions and instruc-
1
-
Read all instructions in this manual before
3
-
Note: The terms “right side” and “left side”
4
-
Make sure you have the following tools:
5
-
Press three 50mm Square Inner Caps (72) into
6
-
Attach the Press Upright (16) to the indicated two
7
-
Press a 26mm x 76mm Inner Cap (74) into the
8
-
See the inset drawings. Press the two Top
9
-
14. Press two 56mm Round Inner Caps (71) into the
10
-
17. Press two Butterfly Arm Bushings (64) into the
11
-
20. Wrap the Press Cable (101) around a 115mm
12
-
24. Wrap the Press Cable (101) up around a 115mm
13
-
28. Route the High Cable (100) through the Right
14
-
32. Wrap the High Cable (100) around a 115mm
15
-
36. Locate the Butterfly Cable (102). Attach one
16
-
39. Wrap the Butterfly Cable (102) around a 115mm
17
-
43. Wrap the Rear Cable (103) around a 115mm
18
-
48. Attach the Shroud (18) to the two M8 x 90mm
19
-
50. Press four 19mm Round Inner Caps (70) into the
20
-
ADJUSTING THE SEAT
23
-
TROUBLESHOOTING AND MAINTENANCE
25
-
Butterfly Cable (102)—129”
26
-
Rear Cable (103)
27
-
THE FOUR BASIC TYPES OF WORKOUTS
28
-
M4 Washer (24)
32
-
M10 x 65mm Bolt (88)
33
-
50mm x 75mm Inner Cap (68)
34
-
Part No. 192818 R0303A
37
