Norton Clipper CE414-350 Manuals

ENGLISH 1 OWNERS MANUAL High Speed Hand Held Electric Models: CE414-350 FORM: CE414-350 rev 5-2016 ENGLISH 2 WARRANTY Norton warrants all products manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to the customer. The responsibility of Saint-Gobain Abrasives under this warranty is limited to replacement or repair of defective parts at Saint-Gobain’s, Plainfield Indiana facility, or at a point designated by it, of such part as shall appear to us upon inspection at such point, to have been defective in material or workmanship, with expense for transportation borne by the customer. In no event shall Saint-Gobain Abrasives be liable for consequential or incidental damages arising out of the failure of any product to operate properly. This warranty is in lieu of all other warranties, expressed or implied, and all such other warranties are hereby disclaimed. Important: Before placing equipment in operation, record the following information: MODEL:_________ SERIAL NO.___________ PURCHASE FROM: _____________________ ADDRESS: ____________________________ CITY_______ STATE ______ ZIP ________ TELEPHONE NO. ______________________ Before using this equipment, make sure that any person using it reads and understands the instructions in this owner’s manual. ENGLISH 3 Instruction Manual Electric Hand Held High Speed Saw CE414-350 Dear customer Thank you for purchasing this quality product from Saint-Gobain Abrasives. For many decades, we have been a producer of professional duty construction equipment. Each of our products has been rigorously tested to withstand use of the everyday professional operator and to meet all safety regulations. With the main body composed primarily of high quality aluminium and reinforced plastic components our products promise long service life with minimal down time. We know you will be satisfied with your purchase because we have put a lot of care and attention to the assembly and testing of your product. Before operating this machine, read and fully understand these operating instructions and always observe all safety regulations and instructions. If you have any further questions after reading these operating instructions, contact Saint-Gobain Abrasives customer service at 800-554-8003. Observe the maintenance guidelines closely to ensure the long service life and safe operation of your equipment Table of Contents ENGLISH 4 1 Information about these operating instructions .............................................................................. 5 1.1 Notational conventions used in the operating instructions ........................................................... 5 2 Warning, Instruction and Notice Icons .............................................................................................. 5 3 Safety Provisions ................................................................................................................................ 8 3.1 Correct Use .................................................................................................................................. 8 3.2 General Safety Notes ................................................................................................................... 8 Dust and Silica Warning ............................................................................................................... 7 3.3 Prescribed Work Clothing / PPE (Personal Protection Equipment) .............................................. 8 3.4 In Transport .................................................................................................................................. 9 3.5 Before Use.................................................................................................................................... 9 3.6 Electrical Safety ............................................................................................................................ 9 3.7 During Work.................................................................................................................................. 9 4 Power Tool Description and Features ............................................................................................. 13 4.1 Technical Data............................................................................................................................ 13 4.2 Scope of Delivery ....................................................................................................................... 14 4.3 Important Operating and Function Features ............................................................................... 14 4.4 Power trigger usage ................................................................................................................... 15 4.5 Electrical safety system .............................................................................................................. 16 5 Preparing for Use .............................................................................................................................. 17 5.1 Installing/Removing the Blade .................................................................................................... 17 5.2 Adjusting the Blade Guard .......................................................................................................... 18 5.3 Water Connection for Wet Cutting .............................................................................................. 18 6 Power Tool Use ................................................................................................................................. 19 6.1 Cutting Blades ............................................................................................................................ 18 6.2 Permissible Cutting Area and Danger From Kickback or Drawing Along ................................... 20 6.3 Working Behaviour and Working Technique .............................................................................. 21 6.4 Cutting Metal .............................................................................................................................. 21 6.5 Cutting Concrete/Masonry Materials .......................................................................................... 21 7 Operating and Maintenance Notes .................................................................................................. 22 7.1 Cleaning and Care ...................................................................................................................... 22 7.2 Replacing the Carbon Brushes ................................................................................................... 23 7.3 Using the Kick Stand .................................................................................................................. 24 8 Warranty ............................................................................................................................................. 25 9 Service Parts ...................................................................................................................................... 25 Table of Contents