NOVACAT V10 ED Manuals

Operator‘s manual GB + INSTRUCTIONS FOR PRODUCT DELIVERY . . . Page 3 "Translation of the original Operating Manual" Nr. 99 3846.GB.80Q.1 • Disc mower NOVACAT V10 ED/RC (Type 3846 : + . . 01295) 1500_GB-PAGE 2 Product liability, information obligation Product liability obliges manufacturers and dealers to issue operating instructions for the machine at the point of sale and to instruct the customer on the operation, safety and maintenance regulations governing the machine. A confirmation is required to verify that the machine and operating instructions have been handed over correctly. For this purpose - Document A is to be signed and returned to Pöttinger or via the internet to www.poettinger.at - Document B remains with the specialist dealer handing over the machine. - The customer receives document C. For the purposes of product liability law, every farmer is an entrepreneur. In the terms of product liability law, damage to property is any damage arising due to the machine, but not to the machine, and an excess (500 euros) exists for this liability. Corporate damage to property within the terms of the product liability law is excluded from this liability. Be advised! The operating instructions must also be handed over with any subsequent machine sale or transfer and the transferee must be instructed in the regulations stated. Pöttinger - Trust creates Af� nity - since 1871 "Quality pays for itself." Therefore we apply the highest quality standards to our products which are constantly monitored by our in-house quality management and our management board. Because the safety, perfect function, highest quality and absolute reliability of our machines in operation are the core competencies for which we stand. There may be deviations between these instructions and the product as we are constantly developing our products. Therefore no claims may be derived from the data, illustrations and descriptions. Please contact your Specialist Service Centre for any binding information about specific features of your machine. We would ask you to please understand that changes to the scope of supply with regard to form, equipment and technical specifications are possible at any time. Any form of reprint, translation or reproduction, including excerpts, requires the written approval of Pöttinger Landtechnik GmbH. All rights according to copyright laws remain expressly reserved by Pöttinger Landtechnik GmbH. © Pöttinger Landtechnik GmbH – 31st October 2012 Refer to PÖTPRO for additional information about your machine: Are you looking for suitable accessories for your machine? No problem! All the information you require is here at your disposal. Scan the QR code on the machine's type plate or look under www.poettinger.at/poetpro And if we don't have what your looking for, then your Specialist Service Centre is there for you with help and advice. Dokument D GB-0600 Dokum D Anbaugeräte - 3 - PÖTTINGER Landtechnik GmbH Industriegelände 1 A-4710 Grieskirchen Tel. 07248 / 600 -0 Telefax 07248 / 600-2511 � Machine checked according to delivery note. All attached parts removed. All safety equipment, drive shaft and operating devices at hand. � Operation and maintenance of machine and/or implement according to operating instructions explained to the customer. � Tyres checked re. correct pressure. � Wheel nuts checked re. tightness. � Drive shaft cut to correct lenght. � Correct power-take-off speed indicated. � Fitting to tractor carried out: to three-point linkage � Trial run carried out and no defects found. � Functions explained during trial run. � Pivoting in transporting and operating position explained. � Information given re. optional extras. � Absolute need to read the operating manual indicated. Please check. X According to the product liability please check the above mentioned items. INSTRUCTIONS FOR PRO DUCT DELIVERY GB In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary. For this purpose please do the following: - sign the document A and send it to the company Pöttinger or via the internet to www.poettinger.at - document B stays with the specialist factory delivering the machine. - document C stays with the customer.