NOXAS ID-O-Matic Manuals

ID-O-Matic Manual 11/7/2007 Page 1 of 6 NØXAS ID-O-Matic ID Timer / Annunciator The ID-O-Matic kit uses a microprocessor based, single chip ID timer/annunciator intended for Amateur Radio and other applications. Several modes of operation make it suitable for use in the shack or as an automatic Morse code ID for beacons, repeaters and “fox hunt” transmitters. The ID-O-Matic chip is a compact, single 18-pin package ideal for standalone use or integration into transmitter or transceiver. These instructions detail the assembly and use of the ID-O-Matic kit. ID-O-Matic Features (Firmware version 2.8) • Supply voltage up to 24V with on-board regulator • Low parts count, easy to assemble • Serial interface for setup from PC or terminal • Dual color LED for green/yellow/red indicator • Reminder mode for shack use • Delays from 1 second to over 9 hours may be set • All memory and parameter settings retained with power off • Auto ID mode with repeater inputs • Morse code speed adjustable from 5 to 60 WPM • INHIBIT input to delay ID • START input to prevent repeater “beaconing” on quiet channel • Repeater beacon timer to announce at regular intervals when desired • Separate normal and beacon ID messages can be used, up to 64 characters each • Optional, variable length courtesy beep for repeater mode use • Independent audio frequencies for Morse ID and courtesy beep • Adjustable PTT hang time • PTT time-out timer • Audio (MCW), CW and PTT outputs • CW and PTT outputs drive MOSFETs for direct connection to many rigs • AR, BT, SK prosigns and new @ character supported

ID-O-Matic Manual 6/16/2004 Page 1 of 5 NØXAS ID-O-Matic ID Timer / Annunciator The ID-O-Matic is a single chip ID timer/annunciator intended for Amateur Radio and other applications. Several modes of operation make it suitable for use in the shack or as an automatic Morse code ID for beacons, repeaters and “fox hunt” transmitters. Details of how to use the chip in your own project are in these instructions. Features of the ID-O-Matic: • Supply voltage from 3 to 5.5V • Low parts count • Serial interface for setup from PC or terminal • Speed adjustable from 5 to 60 WPM • Variable pitch audio sidetone • Uses dual color LED for green/yellow/red indicator • Reminder mode for shack use • Auto ID mode with repeater mode inputs • All memory and parameter settings retained with power off • Compact, single 18-pin package ideal for standalone use or integration into transmitter or transceiver • INHIBIT input to delay ID • START input to prevent “beaconing” on quiet channel • Audio (MCW), CW and PTT outputs • 62-character Morse message memory • AR, BT, SK prosigns and new @ character supported • Delays from 1 second to over 9 hours are possible