NuAire xboxer xbc+ Manuals

1 08. 12. 21. Document Number 671949 Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk Adapt Trend (T) Control Supply & Extract Ventilation with Heat Recovery Installation Manual EMC Directive 2014/30/EU LVD Directive 2014/35/EU 1.0 SAFETY INFORMATION • The provision of the electrical supply and the connection of the unit to the mains must be carried out by a qualified electrician. • Isolate from power supply before removing any covers. During installation / maintenance ensure all covers are fitted before switching on the mains supply. • All-pole disconnection from the mains as shown in the wiring diagram must be incorporated within the fixed wiring and shall have a minimum contact separation of 3mm in accordance with latest edition of the wiring regulations. • This unit must be earthed. • Ducting must be securely fixed with screws to the spigot to prevent access to live parts. Duct runs terminating close to the fan must be adequately protected by suitable guards. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • Precautions must be taken to avoid the back-flow of gases into the room from the open flue of gas or other fuel-burning appliances. • This appliance should not be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning the safe use of the appliance by a person responsible for their safety. Children shall not play with the appliance. Cleaning and user maintenance shall not be carried out by children. 1.1 Symbols GENERAL WARNING Signifies a general warning regarding hazard specified by supplementary information. ELECTRIC SHOCK This unit must be completely electrically isolated before any panels are removed. Check mains supply and control connections. ROTATING PARTS This unit contains fast moving rotational parts which may start automatically. It is the sole responsibility of the installer to adequately guard these components. REFER TO INSTRUCTION MANUAL Read and understand the installation and maintenance manual before installing, operating or maintaining this product.