Olympus C-120 - CAMEDIA - Digital Camera Manuals

DIGITAL CAMERA C-120 D-380 REFERENCE MANUAL CONNECTING THE CAMERA TO A PC CAMERA OPERATION

C-120 D-380 ENGLISH FRANÇAIS DEUTSCH ESPAÑOL

Stylus 105/Stylus 120 Specifications Type Fully automatic 35mm autofocus lens-shutter camera with built-in zoom lens Film Format 35mm standard DX-coded film (24mm x 36mm) Lens 105: Olympus Extra-low Dispersion 38mm – 105mm zoom lens, f5.6 – f11.9, 8 elements in 7 groups 120: Olympus Extra-low Dispersion 38mm – 120mm zoom lens, f5.6 – f12.6, 8 elements in 7 groups Shutter Programmed electronic shutter Viewfinder Real-image zoom viewfinder with autofocus mark, close-up correction mark, autofocus indicator, flash indicator, camera shake indicator Focus System 11-point multi-wide passive-type autofocus, Focus lock possible Focusing Range 2.0' (0.6 m) – infinity Exposure Control Programmed automatic exposure control, switchable from 3-zone light metering to spot metering Exposure Range 105: Wide: EV3 (f5.6, 4 sec.) – EV16 (f10.2, 1/630 sec.) Tele: EV5.1 (f11.9, 4 sec.) – EV17 (f18, 1/410 sec.) 120: Wide: EV3 (f5.6, 4 sec.) – EV16 (f10.2, 1/630 sec.) Tele: EV5.3 (f12.6, 4 sec.) – EV17 (f18, 1/410 sec.) Exposure Counter Progressive type with automatic reset, Displayed on LCD panel Selftimer Electronic, Approx. 12 sec. delay Optional Remote Infrared, Approx. 3 sec. delay Film Speed Range Automatic setting with DX-coded ISO 50 – 3200 film, Intermediate film speeds automatically set to next lower speed, Non-DX coded film and film with less than ISO 50 automatically set to ISO 100 Film Transport Automatic loading (automatically advances to first frame when back cover is closed), Auto frame advance, Auto rewind (auto activation at end of film or with rewind button) Flash Built-in flash, Recycle time approx. 0.5 sec. – 5.5 sec. at normal temperature with new battery Flash Working Range 105: With ISO 100 color negative film: Wide 2.0' – 14.8' (0.6 m – 4.5 m), Tele: 2.0' – 6.9' (0.6 m – 2.1 m) With ISO 400 color negative film: Wide 2.0' – 29.5' (0.6 m – 9.0 m), Tele: 2.0' – 13.8' (0.6 m – 4.2 m) 120: With ISO 100 color negative film: Wide 2.0' – 14.8' (0.6 m – 4.5 m), Tele: 2.0' – 6.6' (0.6 m – 2.0 m) With ISO 400 color negative film: Wide 2.0' – 29.5' (0.6 m – 9.0 m), Tele: 2.0' – 13.2' (0.6 m – 4.0 m) Flash Modes Auto (automatic flash activation in low light), Auto with Red-Eye Reduction, Night Scene (max. shutter speed 2 sec.), Red-Eye Reduction Night Scene, Fill-In (forced activation), Off Battery Check Displayed on LCD panel Power Source One 3V lithium battery (CR-123A or DL-123A) Dimensions 4.6" W x 2.4" H x 1.7" D (116 x 60.5 x 42 mm) without protrusions Weight 7.2 oz. (205 g) without battery and film Date/Time Recording Data imprinted onto film from lens side, Data displayed on LCD panel Formats: No data, Year-month-day, Month-day-year, Day-month-year, Day-hour-minute Calendar: Automatic up to year 2035 Specifications are subject to change without notice or obligation on the part of the manufacturer. ©2003 Olympus America Inc. Olympus is a registered trademark of Olympus Optical Co., Ltd. C1378-0203 olympusamerica.com/stylus105 olympusamerica.com/stylus120 Stylus 105/Stylus 120 As compact and stylish as they are powerful. Each camera features a versatile high- quality zoom lens with aspherical and Extra-low Dispersion glass elements. Sophisticated focus and exposure systems. All-weather durability. And all the innovation you expect from Olympus. Nothing’s impossible.

We’ve included this convenient Quick start guide to show you basic functions and techniques that will help you quickly master your new camera. For more detailed descriptions of procedures, as well as for additional information on more sophisticated features not covered here, please refer to the printed “Basic Manual”, or the primary “Reference Manual” on the CD-ROM. Package contents 1 Getting started Attaching the strap 1111 Thread the short end of the strap through the strap eyelet. 2222 Thread the long end of the strap through the loop that has already gone through the eyelet. 3333 Pull the strap tight, making sure that it is securely fastened and will not come loose. Loading the batteries 1111 Make sure that: 2222 Slide the battery compartment cover in the direction of (the direction indicated by the mark on the cover), and lift it up in the direction of . 3333 Insert the batteries, making sure that they are correctly oriented as shown in the illustration. 4444 Close the battery compartment cover in the direction of . While pressing the mark, slide the cover in the direction of . If the battery compartment cover will not close easily, do not force it. Try pressing [OPEN] and the mark with both hands. Inserting the card (SmartMedia) 1111 Make sure that: 2222 Open the card cover. 3333 Insert the card as far as it will go in the direction shown in the illustration. There is an arrow inside the card cover, indicating the direction in which the card should be inserted. 4444 Close the card cover securely until it clicks. ���� Removing the card Hold the card with your fingertips and pull it out in the direction of the arrow. 2 Turning the power on/off When shooting pictures When playing back pictures on the camera C-120/D-380 C-120/D-380 C-120/D-380 C-120/D-380 Quick start guide DIGITAL CAMERA � Camera � Strap � AA (R6) alkaline batteries (4 pieces) � USB cable � Basic manual � Quick start guide � Software installation guide (included in the CD-ROM package) � CD-ROM with Windows 98 USB driver software, Reference manual, and more. � Warranty card/Registration card (not provided in some areas) � Safety Precautions (booklet) � SmartMedia � Static-free case � Index labels (2 pieces) � Write-protect adhesive seals (4 pieces) � SmartMedia instructions OLYMPUS AMERICA INC. Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000 24/7 online automated help: http://support.olympusamerica.com/ Phone customer support: Tel. 1-888-553-4448 (Toll-free) OLYMPUS OPTICAL CO. (EUROPA) GMBH. Premises/Goods delivery: Wendenstraβe 14-18, 20097 Hamburg, Germany Tel. 040-237730 Letters: Postfach 10 49 08, 20034 Hamburg, Germany http://www.olympus.com/ Printed in Japan 1AG6P1P1295-- VT348201 Strap eyelet The lens barrier is closed. The green lamp is off. The monitor is off. Battery insertion direction mark When using AA (R6) batteries When using lithium battery packs Never open the card cover, or remove the card or the batteries while the camera is turned on. Doing so could destroy all data on the card. Destroyed data cannot be restored. The lens barrier is closed. The green lamp is off. The monitor is off. Card insertion direction mark • If you open the lens barrier without the card inside the camera, the NO CARD appears on the monitor. In this case, you can record pictures in the camera’s internal memory. • To save battery power, the camera automatically enters the sleep mode after about 3 minutes of non-operation. If the monitor is on, it will automatically turn off. The camera activates again as soon as you lightly press the shutter button or the button. Whenever possible, turn the camera off when you do not intend to take any pictures for a while. Power on Power off Power on: Open the lens barrier. The camera turns on in the shooting mode. Power off: Close the lens barrier. The camera turns off. Power ON Power OFF Power on: Press the (monitor) button with the lens barrier closed. The camera turns on in the playback mode (the monitor turns on). Power off: Press the (monitor) button. The camera turns off (the monitor turns off). With the lens barrier closed 3 Shooting/Playback Taking still pictures 1111 Open the lens barrier. Slide the lens barrier open until it clicks. 2222 Position the target mark over the subject in the viewfinder. 3333 Press the shutter button gently (halfway). The green lamp on the right of the viewfinder lights up. The exposure is locked as long as the shutter button is kept pressed halfway. 4444 Press the shutter button all the way (fully). The camera takes the picture. Playing back still pictures 1111 Press with the lens barrier closed. The monitor turns on and displays the last picture taken. 2222 Press . : Displays the previous picture. : Displays the next picture. 3333 Press to cancel playback. The monitor and camera turn off. Recording movies 1111 Press with the lens barrier open. The top menu in the shooting mode is displayed. 2222 Press to select DRIVE. 3333 Press to select , then press . 4444 Record the movie while observing your subject on the monitor. Press the shutter button fully to start recording. Press the shutter button fully again to stop recording. Playing back movies 1111 Press with the lens barrier closed. The monitor turns on. 2222 Press to display the desired picture with a indicator, then press . The top menu is displayed. 3333 Press to select MOVIE PLAYBACK. The movie is played back after the green lamp on the right of the viewfinder blinks and the movie data is downloaded to the camera. When the movie reaches the end, the display returns automatically to the beginning of the movie. 4444 Press to display the MOVIE PLAYBACK menu. Then select the desired opreation and press . PLAYBACK : Plays back the entire movie again. FRAME BY FRAME : Plays back the movie manually one frame at a time. EXIT : Leaves the movie playback mode. 4 Erasing pictures Single-frame erase 1111 Press with the lens barrier closed. The monitor turns on. 2222 Press to select the picture you want to erase. 3333 Press . The top menu is displayed. 4444 Press to select ERASE. 5555 Press to select YES, then press . The picture is erased and the menu is closed. 5 Protecting pictures You are recommended to protect important pictures to avoid accidentally erasing them. 1111 Press with the lens barrier closed. The monitor turns on. 2222 Press to select the picture you want to protect. 3333 Press , then press . The mode menu is displayed. 4444 Press to select the PLAY tab, then press . 5555 Press to select , then press . 6666 Press to select ON. The selected picture is protected. To close the menu, press twice. Target mark Green lamp DRIVE CANCEL GO SELECt FRAME BY FRAME EXIt MOVIE PLAYBACK PLAYBACK SELECt GO • Erasure is not possible if the picture you want to erase is protected or a write-protect seal is attached to the card. Before erasing, unprotect the picture or remove the write-protect seal from the card. • Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. MODE MENU INFO ERASE YES NO SELECt GO ERASE • The indicator is displayed at the top right of the protected picture. • Protection on each picture remains even when the camera is turned off. • Protected pictures cannot be erased by the single-frame/all-frame erase function, but they can be all erased with the format function. • Protection cannot be applied to pictures stored on a card with a write- protect seal. SEt CARD EDIt PLAY SEt CARD EDIt PLAY OFF ON