Olympus C-4040 Manuals

4.1 Megapixel Digital Camera A 4.1 megapixel digital camera with a super bright 3x zoom len Focus On Life Specifications and design are subject to change without any notice or obligation on the part of the manufacturer. All trademarks mentioned herein are the property of their respective holder. ©2001 Olympus America Inc. D994 http://c-4040.olympus.com C-4040 ZOOM Specifications Image Pickup Element 1/1.8" (.55") solid-state 4.13 million pixel CCD (effective 3.98 million pixels) Lens Olympus aspherical glass 3x zoom lens; 7.1 – 21.3mm f1.8/2.6 – f10 (equivalent to 35 – 105mm lens on 35mm camera); 10 elements in 7 groups Digital Zoom Up to 7.5x continuous Recording System Still image: TIFF (non-compressed), JPEG, DCF (Design rule for Camera File system), DPOF support; Motion picture: QuickTime® motion JPEG; Sound: WAV format DPOF Setting Print reservation; All print reservation; Date/time; Trimming Pixel Mapping Selectable mode remaps CCD via bicubic interpolation Optimum Image SHQ: 3200 x 2400, 2816 x 2112; HQ: 3200 x 2400, 2816 x 2112 (all four OIE Enlargement resolutions interpolated from maximum optical resolution of 2272 x 1704) Noise Reduction Mode available at shutter speeds of 1 second or longer; Sharpness: +/- 5 steps; Contrast: +/- 5 steps Memory 3V (3.3V) SmartMedia™ card (4, 8, 16, 32, 64 or 128MB); 16MB SmartMedia included Viewfinder Optical real-image viewfinder with AF/backlighting correction mark; LCD monitor LCD Monitor 1.8" (4.5 cm) Wide-View color TFT LCD monitor with 114,000 pixels; Brightness adjustment ISO Auto; Fixed: 100, 200, 400 (equivalent) Working Range Macro mode: 8" – 31" (0.2 m – 0.8 m); Standard mode: 31" – ∞ (0.8 m – ∞) Focusing iESP Multi-pattern AF (autofocus) TTL system (contrast detection system): 8" – ∞ (0.2 m – ∞); Manual focus (setting by gauge): 8" – ∞ (0.2 m – ∞). Exposure Control Programmed Auto mode: f1.8 – f10, 1 – 1/800 sec.; Aperture Priority mode: f1.8 – f10, 1/3EV steps; Shutter Priority mode: still image 4 – 1/800 sec. (used with mechanical shutter), 1/3EV steps; Manual exposure: up to 16 seconds; Exposure compensation: +/- 2EV by 1/3EV steps; Auto bracketing: 3 or 5 images, selectable from 1/3EV, 2/3EV and 1EV; QuickTime® mode: 1/30 – 1/10,000 sec Metering Digital ESP Multi-pattern; Spot; 8-point Multi-spot; AE lock White Balance iESP Multi-pattern auto TTL; Pre-set manual (Daylight, Overcast, Tungsten, Fluorescent); One-touch manual calibration; Manual compensation Flash Modes Built-in flash modes: Auto (low- & backlight), Red-Eye Reduction, Fill-in (Forced On), Forced Off, Slow Shutter Synchronization (First Curtain and Second Curtain); External terminal: Auto, Forced On, Forced Off Flash Working Range Wide: 31" – 18' (0.8 m – 5.6 m) (approximately) @ ISO 100; Tele: 8" – 12.5' (0.2 m – 3.8 m) (approximately) @ ISO 100 Flash Charging Time Less than 6 seconds (at normal temperature with new batteries) Sequence 2 frames per second burst up to 8 frames in HQ mode Panorama Up to 10 frames stitchable with CAMEDIA Master software when using Olympus brand SmartMedia QuickTime ® Movie Up to approximately 32 seconds with sound at 15 frames/second in 320 x 240 HQ mode with 16MB SmartMedia; Up to approximately 130 seconds with sound at 15 frames/second in 160 x 120 SQ mode with 16MB SmartMedia; 4 second sound captioning of still images Movie Edit Cut; Index Image Effects Sepia mode, Black and White mode, Blackboard mode, Whiteboard mode Selftimer/Remote 12 second delay (camera)/3 second delay (remote control) Setting Memorization On, Default, Custom Outer Connectors DC Input, Auto-Connect USB, A/V Output (NTSC), 5-pin External Flash terminal for optional Olympus FL-40 flash Auto-Connect USB Compatible with Windows ME/2000 Pro/XP and Mac OS 8.6 – OS X; Windows 98 rev 2 driver provided on CD Image Playback Index display; Up to 4x enlargement; Slide show; Scene rotation Operating Environment Operation: 32˚ – 104˚ F (0˚ – 40˚ C), 30 – 90% humidity; Storage: -4˚ – 140˚ F (-20˚ – 60˚ C), 10 – 90% humidity Power Supply Main power source: 2 x LB-01 CR-V3 lithium battery pack (included), 4 x AA NiMH batteries, 4 x AA lithium batteries, 4 x AA NiCd batteries; 4 x AA alkaline batteries (Manganese batteries cannot be used); optional C-7AU AC adapter Date/Time/Calendar Simultaneous recording onto image data Automatic Calendar Up to year 2031 Dimensions 4.3" W x 3" H x 2.75" D (110 mm x 76 mm x 70 mm) excluding projections Weight 11.3 oz. (320 g) without batteries and SmartMedia card C - 4 0 4 0 Z O O M The Olympus School of Digital Photography is a one-day workshop covering everything from digital image capture to final output. To register, visit www.olympusphotoschool.com or call 1-800-833-6297 x6161.

DRIVE WB MODE MENU Moving around the Menu screen M ENU 1 2 4 Note:The Top menu and avail- able menu functions vary depending on the mode dial setting. (See the Reference Manual for more details.) Top menu (Mode dial: “P”) If you select MODE MENU in step 2 The top menu functions can be changed to your liking in the “P” and “A/S/M” modes (SHORT CUT setting). PIC SET CARD ISO A/S/M FLASH DRIVE AUTO IN+ CAMERA CAM PIC CARD SET Runs through all saved pictures one after another (slide-show). � MOVIE PLAY (movies) MOVIE PLAYBACK INDEX EDIT Plays back movies. Shows 9-frame indexes of still-shots from movies in order to easily check the movies’ contents. Edits recorded movies. How to use the Shooting Menu � PLAY (still pictures) Adds sound to recorded still pictures. � CARD CARD SETUP Formats cards (FORMAT), or erases all images on them (ALL ERASE). � SETUP ALL RESET Selects whether to keep the current camera settings when you turn off the power. (ON/OFF/CUSTOM) Sets the beep sound to OFF/LOW/HIGH. Adjusts the brightness of the monitor. Sets the date/time. Selects the number of frames in the index display. (4/9/16-frame) ●Turns the monitor on/off. ●Press quickly two times to play back the last record- ed image. How to use the buttons and dial B UTTONS &Dial Shooting: Selects flash modes (Working range [Wide: 0.8-5.6 m (2.6-18.4 ft)/ Tele: 0.2-3.8 m (8"-12.5 ft) Playback:Each press erases one frame. M ENU How to use the Playback menu � (still pictures) � INFO Changes the amount of information (ISO, WHITE BALANCE, etc.) displayed on the Monitor. Macro : Takes close-up pictures (Working range: 0.2-0.8 m (8"-2.6 ft)). Spot : Selects area for metering. Playback : Selects pictures for printing (Print reserve). Brings up CAMERA menu Brings up PICTURE menu Brings up CARD menu Brings up SETUP menu 3 Shooting:AE lock (factory default setting) —Locks exposure. Custom button — Performs whichever function you have set for it. Playback:Protects pictures from being accidentally erased. Rotates pictures during TV playback. ●Displays menu screen. ●Sets selected items on the menu screen. ●Hold down for one second or more to put the camera into manual focus mode. CARD SETUP Formats cards (all images on the card are deleted). � SETUP ALL RESET REC VIEW FILE NAME PIXEL MAPPING m/ft SHORT CUT CUSTOM BUTTON Selects whether to keep the current camera settings when you turn off the power. (ON/OFF/CUSTOM) Sets the beep sound to OFF/LOW/HIGH. Selects whether to display images on the monitor while saving them to a card. Creates file/folder names for images to be saved. (RESET/ AUTO) Checks the CCD and image processing circuit for errors. Adjusts the brightness of the monitor. Sets the date/time. Sets the measurement units (m/ft) during manual focus. Selects items for the shortcut menu on the top menu screen. Lets you assign a function to the custom button on the camera (factory default setting: AE lock). Sets the record mode. (TIFF/SHQ,/HQ/SQ1/SQ2) Adjusts the white balance according to the light source. (AUTO/PRESET/ ) Allows you to make fine changes to the white balance. Adjusts the sharpness of images. Adjusts the contrast of images. � CARD � PICTURE DRIVE (for movies) ISO A/S/M FLASH SLOW NOISE REDUCTION MULTI METERING DIGITAL ZOOM FULLTIME AF AF MODE (for still pictures) (for movies) PANORAMA FUNCTION Selects the drive mode from sequential shooting, auto bracketting, or remote/self timer shooting (only for still pictures). Sets remote/self timer shooting. Adjusts the ISO sensitivity. (AUTO/100/200/400) Selects the exposure mode from A(Aperture priority auto), S (Shutter priority auto) or M (Manual mode), when the Mode dial is set to “A/S/M”. Adjusts the flash intensity. Selects whether to use both the external and built-in flashes, or the external flash only. Adjusts the flash for slow shutter speeds. ( SLOW1/ SLOW/ SLOW2) Reduces the noise on images during long exposures. Decides the best exposure by metering up to 8 different spots in the picture. Zooming can be set up to 7.5x (equivalent to 35mm- 260mm on a 35mm camera). Keeps the image in focus at all times without having to press the shutter button halfway. Selects the auto focus mode (iESP, SPOT). Allows approx. 4 seconds of sound recording to be attached to a picture. Allows sound to be recorded while shooting movies. Allows panorama pictures to be taken (CAMEDIA Master is required). Changes the picture color to BLACK&WHITE, SEPIA or WHITE/BLACK BOARD. WB SHARPNESS CONTRAST � CAMERA Zoom lever Shooting : Zooms in/out. Playback : Displays multiple pictures at the same time (Index-display), or enlarges pictures (close-up playback). Print reserve: Sets trimming size. Shutter button Focuses (half press) or shoots (full press). Mode dial :Records movies. A/S/M:Sets controls for Aperture-priority auto exposure/Shutter-priority auto exposure/Manual exposure. P :Full automatic exposure with one press of the shutter button. OFF :Turns off the power. :Displays pictures. Monitor button Viewfinder Monitor Displays images for shooting or playback. AE lock/Custom button Shooting :Sets aperture/shut- ter speed/exposure compensation/man- ual focusing values. Playback :Selects pictures to be displayed. Menu screen:Selects menu items. Arrow pad OK/Menu button Flash mode button Macro/Spot button

�Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. �We recommend that you take test shots to get accustomed to your camera before taking important photographs. REFERENCE MANUAL