Omega Lift Equipment 90153 Manuals

Printed in China 90153-M0_022013 Load Leveler Model 90153 Capacity 3/4 Ton Operating Instructions & Parts Manual SFA Companies http://www.omegalift.com ! WARNING To avoid crushing and related injuries: NEVER work under a loaded load leveler or engine crane. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. ! Read this manual and follow all the Safety Rules and Operating Instructions before using this product. 2 SPECIFICATIONS Figure 1 - Load Leveler Components SAFETY AND GENERAL INFORMATION Save these instructions. For your safety, read, understand and follow the information contained within. The owner and operator shall have an understanding of this equipment and safe operating procedures before attempting to use. Instructions and Safety information shall be conveyed in the operators native language before use of this equipment is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the equipment. If any doubt exists as to the safe and proper use of this equipment, remove from service immediately. Inspect before each use. Do not use if there are broken, bent, cracked or otherwise damaged parts (including labels). Owners and operators of this equipment shall be aware that the use of this equipment may require special training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that any missing or damaged decals, warning / safety labels or signs be replaced with factory authorized replacements only. Any engine sling that appears to be damaged in any way, is worn or operates abnormally shall be removed from service and destroyed immediately. PRODUCT DESCRIPTION Omega Load Leveler is designed to use with standard engine crane to safely support load up to 3/4 Ton. It assists the removal and installation of engine easily by mouting four bolt-thru bracket to the engine. Heavy duty steel frame helps prevent distortion and twisting. Compliance with factory standards ensure safety, strength and stability. BEFORE USE 1. Verify that the equipment and the application are compatible, if in doubt call Omega Technical Service (888) 332-6419. 2. Before using this equipment, read the operator's manual completely and familiarize yourself thoroughly with the equipment and the hazards associated with its improper use. 3. Inspect before each use. Do not use if bent, broken or cracked components are noted. 4. Ensure that all parts move freely. Model Capacity Chain Bracket Distance Chain Length Frame Size (L x W) 90153 3/4 Ton 10" ~ 12-1/2" 12" 18" x 7-5/8" ! WARNING • Study, understand, and follow all instructions provided before attempting to use this equipment. • Do not exceed rated capacity. • Never work under a lifted load for any reason. • Ensure that the engine is supported securely before repairing. • Do not use this equipment for any purpose other than that for which it is intended. • No alterations shall be made to this product. • Failure to heed these markings may result in personal injury and/or property damage. Chain with Bracket Tilt adjustment Screw Threaded Tilting Rod Hanging Chain Sling Bar 3 2 1 3 OPERATION 1. There are three positions available to adjust the chain bracket width to fit most engine. Adjust to your best fit and ensure that the threaded pin is tighten. 2. Secure engine to the chain brackets 3. Engage the Load Leveler hanging chain to the engine crane hook. 4. Ensure the load is centered. 5. Follow vehicle service manual recommendations to remove engine. 6. Study and follow engine crane's operator instructions manual to remove/install engine. 7. When ready to remove engine, lift the engine crane gradually. Balance the engine at proper angle by turning the tilt adjustment screw. 8. Lift the engine crane high enough to clear the vehicle. 9. Immediately upon removal and when clear of the vehicle, lower the load to lowest practical position. Note: Avoid rolling the loaded engine crane. To help, position an engine stand if necessary, move only across smooth, level, seamless surfaces. 10. Before moving, ensure the load: a. is lowered to lowest practical position and below center of gravity. b. is prevented from swinging and inadvertent shifting. 11. Position a suitable engine stand near the removed engine, then immediately transfer the load to engine tand. 12. Check to ensure stand is secure before working on or around. MAINTENANCE Periodically inspect the Load Leveler. Ensure all parts move freely. To help prevent rust, wipe clean after each use. If rust appears, sand affected area and cover with suitable utility paint. Store the Load Leveler in a clean, dry area. REPLACEMENT PARTS Not all components of the Load Leveler are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give part number and part description. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. e-mail: [email protected]; Tel: (888) 332-6419 Fax: (816) 891-6599; Website: http://www.omegalift.com Figure 2 - Load Leveler Parts Illustration Item Part# Description Qty 1 T580-03000-000 Hanging Chain 1 2 T580-01000-000 Chain Group 2 3 T580-01001-000 Threaded Pin 2 Replacement Parts List ! WARNING: To avoid crushing and related injuries, NEVER work under a loaded engine leveler or engine crane. 4 ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products, which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153. Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) SFA Companies SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 888-332-6419 [email protected]