Omni PCR-258 Manuals

REV. B PCR-258 OMNI Tip™ HOMOGENIZING KITS USER MANUAL 2 WARRANTY INFORMATION This manual is a guide for the use of the Omni International’s Omni Tip™ Homogenizing Kits and accessories. Data herein has been verified. It is believed adequate for the intended use of the instrument. If the instrument or procedures are used for purposes over and above the capabilities specified herein, confirmation of the validity and suitability should be obtained, otherwise Omni International does not guarantee results and assumes no obligation or liability. This publication is not a license to operate under, or a recommendation to infringe upon, any process patents. Notes, cautions, and warnings within the text of this manual are used to emphasize important and critical instructions. This Omni International product is warranted to be free from defects in material and workmanship for a period of TWO YEAR from the date of delivery. Omni International will repair or replace and return free of charge any part which is returned to its factory within said period, transportation prepaid by user, and which is found upon inspection to have been defective in materials or workmanship. For the first 90 days, both parts and service are without charge. For the balance of the period, parts will be provided but service will be charged at established labor rates. This warranty does not include normal wear from use; it does not apply to any instrument or parts which have been altered by anyone other than an employee of Omni International nor to any instrument which has been damaged through accident, negligence, failure to follow operating instructions, the use of electric currents or circuits other than those specified on the plate affixed to the instrument, misuse, or abuse. Omni International reserves the right to change, alter, modify, or improve any of its instruments without any obligation whatsoever to make corresponding changes to any instrument previously sold or shipped. THE FORGOING OBLIGATION IS IN LIEU OF ALL OBLIGATIONS AND LIABILITIES INCLUDING NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY OR OTHERWISE, EXPRESSED OR IMPLIED IN FACT OR BY LAW, AND STATE OUR ENTIRE AND EXCLUSIVE LIABILITY AND BUYERS EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES IN CONNECTION WITH THE SALE OR FURNISHING OF GOODS OR PARTS, THEIR DESIGN, SUITABILITY FOR USE, INSTALLATION, OR OPERATION. OMNI INTERNATIONAL WILL IN NO EVENT BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND THEIR LIABILITY UNDER NO CIRCUMSTANCES WILL EXCEED THE CONTRACT PRICE FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED. 3 - READ ALL INSTRUCTIONS BEFORE USING. - SAVE THIS OWNER’S MANUAL. The Omni TH has been engineered for economical functionality as well as safety; however, basic safety precautions and common sense must always be demonstrated when using any electrical product. Do not attempt to modify any part of the Omni TH. If you experience problems with or have questions about your Omni TH, contact your authorized dealer or call Omni International at 1-800-776-4431 or 1-770-421-0058. - DO NOT allow the machine to be submerged in any liquid. - DO NOT use in any setting other than an indoor laboratory. - DO NOT plug power cord into an incorrect outlet. To reduce the risk of burns, electrocution, fire, or injury: - Use this product only for its intended purpose as described in this booklet. DO NOT use attachments not recommended by the manufacturer. - DO NOT operate the product if it is damaged in any way. - Keep this product away from heated surfaces. WARNING: The tip of a saw tooth generator probe is sharp. CAUTION: When using glass-filled PTFE lower bearings, do not operate the unit for extended periods of time without immersing the bottom of the generator probe in liquid or the sample being processed in order to avoid premature failure of the lower bearing. WARNING: Reduce the risk of unintentional starting; make sure that the power switch is in the OFF position prior to plugging in the unit. WARNING: The Omni TH, Tissue Homogenizer has an internal speed control. An external speed control should never be used with this instrument. IMPORTANT SAFEGUARDS WARNING 4 WARNING: DO NOT process pathogenic material in an open container, since aerosols created during normal processing could be inhaled by the operator. Please call for assistance in processing pathogens or other material which require sealed enclosures. WARNING: Safety glasses are recommended when using Omni Tip™ plastic probes. It is possible for plastics to shatter or break after exposure to certain chemicals, or after repeated autoclaving. CAUTION: Large, solid particles, such as frozen tissue, may cause damage to the standard Omni Tip™ generator probes. Use the Hard Tissue Omni Tips™ for those applications. WARNING: Keep all housings in place and in working order. WARNING: Remove all tools from the generator probe before turning the motor on. WARNING: DO NOT use the motor in a dangerous environment. WARNING: Disconnect the motor before servicing, and when changing the generator probe. WARNING: DO NOT modify the plug or cord that is provided. If the plug will not fit the outlet, have the proper outlet installed by a qualified electrician. WARNING: Reduce the risk of unintentional starting; make sure the power switch is in the OFF position before plugging in the motor. WARNING: Damaged or worn power cords should be repaired or replaced immediately by a qualified electrician. WARNING: Improper connection of the equipment can result in a risk of electric shock. WARNING