OpenEye MV Series Manuals

MV – SERIES CLOUD-MANAGED APPLIANCE HARDWARE MANUAL

This guide will assist you with the initial setup of your cloud managed server and recording software. This guide includes hardware setup, software setup, and connecting your server to the Web Services Portal. MV-SERIES CLOUD MANAGED APPLIANCE GETTING STARTED 1. Connect the network cable intended for remote connec- tions to the Client Network Port. NOTE The Camera Network Port is intended for use with a dedicated camera network. 2. Connect the supplied keyboard and mouse using the USB ports. 3. Connect a monitor using the HDMI® port. 4. Plug the supplied power cord into the recorder and connect it to a power source. LINUX: Username: admin Password: 1234 Complete the First Time Wizard for basic system setup. DEFAULT USERNAME & PASSWORD QUICK START GUIDE Reset HDMIx2 USB3.0 Reset Button HDMI® Monitor Keyboard and Mouse CLIENT CAMERA Client Network Port Camera Network Port Copyright ©2021 OpenEye. All Rights Reserved. Information contained in this document is subject to change without prior notice. OpenEye does its best to provide accurate information but cannot be held responsible for typos or mistakes. 37580AA Power Input 1 2 3 4 CONNECTING TO OPENEYE WEB SERVICES 1. Go to Setup , and then navigate to the Remote Services tab. 2. Click Web Services. 3. Enter the Recorder Name & Registration Code. NOTE Reference the OWS Software Manual for instructions on fi nding your Recorder Registration Code. 4. Click Connect.

1. Connect the network cable intended for remote connections to the Client Network Port. 2. Connect the supplied keyboard and mouse using the USB ports. 3. Connect a monitor using the HDMI® port. 4. Connect the cameras to PoE ports, or the external camera network. 5. Plug the supplied power cord into the recorder and connect it to a power source. MV-SERIES CLOUD MANAGED APPLIANCE This guide will assist you with the initial setup of your cloud managed appliance and recording software. This guide includes hardware setup, software setup, and connecting your appliance to the Web Services Portal. Power Supply Client Network Port Keyboard and Mouse HDMI® Monitor PoE IP Camera Connection On / Off Switch 1 1. Go to Setup , and navigate to the Remote Services tab. 2. Click Web Services. 3. Type your Recorder Name & Registration Code. CONNECTING TO OPENEYE WEB SERVICES NOTE Reference the OWS Software Manual for instructions on fi nding your Recorder Registration Code. 4. Click Connect. GETTING STARTED QUICK START GUIDE Log in to the software using the default credentials: Username: admin Password: 1234 Complete the First Time Wizard for basic system setup. APEX SOFTWARE CREDENTIALS Reset HDMIx 2 USB3.0 1 3 5 7 2 4 6 8 2 3 4 5 8 | 16 Channel Reset Button CLIENT 13 15 10 12 14 16 9 11 Remote Communication Port 80 (8888 used if 80 is blocked) Client Network Port IP Address DHCP On-board PoE Ports 1-8 DHCP IP Range: 192.168.50.11 - 192.168.50.100 Static IP Range: 192.168.50.101 - 192.168.50.127 Ports 9-16 DHCP IP Range: 192.168.50.131 - 192.168.50.220 Static IP Range: 192.168.50.221 - 192.168.50.253 Copyright ©2021 OpenEye. All Rights Reserved. Information contained in this document is subject to change without prior notice. OpenEye does its best to provide accurate information but cannot be held responsible for typos or mistakes. 37578AB Network Settings Apex Server software makes it easy to add and confi gure IP cameras. MV-Series Apex recorders will automatically detect and add OpenEye and ONVIF Profi le S Compliant IP cameras set to DHCP connected to the on-board PoE switch. NOTE Third party cameras may need to be confi gured using a third party program before being added to the Apex appliance. Cameras that don’t support ONVIF can be confi gured to record via RTSP streaming. CAMERA MANAGEMENT