OpenEye OE-C3422-WR2 Manuals

2MP HD-TVI Outdoor Mini Dome Camera Model no: OE-C3422-WR2/WR3 Camera Installation & Confi guration Please carefully read these instructions before using this product. Save this document for future use. 35498AC 23221 E Knox Ave Liberty Lake, WA 99019 1.888.542.1103 www.openeye.net Precaution • Do not attempt to dismantle the camera module mounted within the dome. There are no user serviceable parts in the camera module. Refer servicing to a qualifi ed professional. • Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper handling and storage could damage the camera. • Do not operate the camera beyond its temperature or power source rating. Refer to the environmental information provided in this document. Features • 2MP Maximum Resolution • IP67 Outdoor Rating • True Day / Night • True Wide Dynamic Range • 1/3" Progressive CMOS Image Sensor • Adaptive IR Technology • 3-Axis Gimbal General Specifi cations Model No. OE-C3422-WR2/WR3 Maximum Resolution 2MP Image Sensor 1/3" Progressive Scan CMOS Type / Format NTSC Lens 2.8mm / 3.6mm FoV 103.5˚ (2.8 mm), 82.6˚ (3.6 mm) Iris Control Fixed Wide Dynamic Range True WDR Day/Night True Day/Night: Auto/Color/BW (Black and White) Minimum Illumination Color: 0.005 Lux @ (F2.0, AGC ON) B/W: 0 Lux with IR (@ 30IRE) White Balance ATW/Manual Auto White Balance Range 2200K ~ 15000K Backlight Compensation Global/WDR/BLC Auto Gain Control Yes Synchronization Internal Synchronization IP Rating IP67 IK Rating IK7 Operating Temperature -40˚~140˚F (-40˚~60˚C) Heater Yes Power Consumption Max 3.5W Input Voltage 12vDC IR Range 20M Weight 0.77 lb. (350g) Dimensions Φ: 4.4” (111mm) x H: 3.2” (82.4mm) Housing Metal housing / White / Clear Country of Origin China Box Contents • Mounting Template (x1) • Manual/QSG (x1) • T10 Torx Driver (x1) • Screws (x3) • Wall Anchors (x3) Dimensions Regulatory Compliance FCC COMPLIANCE This product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this product in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a non-residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with the radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the antenna of the radio/television receiver. 2. Increase the separation between this equipment and the radio/television receiver. 3. Plug the equipment into a different outlet so that the equipment and the radio/television receiver are on different power mains branch circuits. 4. Consult the dealer or an experienced radio/television technician for additional suggestions. 3.2" (82.4 mm) Φ 4.4" (111 mm) Φ3.1" (79.1 mm) 0.34" (8.7 mm) 0.2" (3-5.0 mm) 1.52" (38.6 mm) 4" (100.4 mm) 0.68" (12.2 mm) 1.86" (47.2 mm)