Organized Living freedomRail File Drawer OBox Manuals

Lock and Key freedomRail Assembly Instructions File Drawer OBox Contents of Package Tools Required Power Drill #2 Phillips Screwdriver Left Side of OBox (Inside View) File Drawer Back (Inside View) Small Drawer Back (Inside View) Drawer Bottom File Drawer Right Side File Drawer Left Side Small Drawer Right Side Small Drawer Front File Drawer Front (4) (2) Drawer Pulls Machine Screws (For Drawer Pulls) (4) Full Extension Drawer Glides (32) Euroscrews (4) 1 5/8" Wood Screws (12) Connector Bolts Hanging Brackets (2) Right Side of OBox (Inside View) Top (Inside View) Small Drawer Left Side Bottom (Inside View) #2 Phillips Driver (2) File Folder Bars O-Ring Assembling the File Drawer OBox Step 1: Attach Hanging Brackets Step 2: Install Connector Bolts Left Side Right Side Back Edge Back Edge Bottom Install (4) Connector Bolts into small holes on Top and Bottom. Step 3: Attach Sides Cam Lock Open (a) Attach Top. (b) Tighten Cams same as in Step 3. (c) Place O-Ring over Lock from top and attach Lock with (2) Euroscrews. Step 4: Attach Top and Locking Mechanism Attach Hanging Brackets to Sides using Euroscrews. (If using power drill, set torque to low setting.) Top Smaller Holes for Connector Bolts 1 Over (a) Attach Sides to Bottom. (b) Lock Cam by turning clockwise until snug. O-Ring Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly. Align Arrow With Hole.