Overland Tandberg RDX QuikStor Manuals

RDX ® QuikStor® External / Internal USB and SATA NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. Visit the support section of the Tandberg Data web site (www.tandbergdata.com) for more information, including product warranty and registration, knowledge base articles, user documentation and technical support. The following power ratings represent typical-use performance. WHAT’S IN THE BOX? Power Ratings FCC Compliance Notice For More Information For RDX Warranty Registration and Technical Support Activation visit: http://registration.tandbergdata.com/ USB or SATA Cables Quick Start Guide RDX Emergency Media Eject Pin RDX Type Power Source DC Input Voltage & Rated Input Current Int SATA III Int USB 3.0 Ext USB3+ Int Power Cable Int Power Cable USB Cable Ext Power Supply 5V/1.6A and 12V/0.003A 5V/1.6A and 12V/0.003A 5V/1.6A peak (<0.9A typical) 5-14VDC/2.4-0.9A 5.5mm USB Y-cable (External) USB Cable (Internal) Mounting Screws (Internal Only) SATA Cable (Internal) Power Adapter Cable (Internal Only) RDX Media (with Selected Products) for USB 3.0 for SATA Write Protect Keyed Corner

RDX ® QuikStor® External / Internal USB and SATA Visit the support section of the Tandberg Data web site (www.tandbergdata.com) for more information, including product warranty and registration, knowledge base articles, user documentation and technical support. The following power ratings represent typical-use performance. WHAT’S IN THE BOX? Power Ratings FCC Compliance Notice For More Information For RDX Warranty Registration and Technical Support Activation visit: http://registration.tandbergdata.com/ USB or SATA Cables Quick Start Guide RDX Emergency Media Eject Pin RDX Type Power Source DC Input Voltage & Rated Input Current Int SATA III Int USB 3.0 Ext USB3+ Int Power Cable Int Power Cable USB Cable Ext Power Supply 5V/1.6A and 12V/0.003A 5V/1.6A and 12V/0.003A 5V/1.6A peak (<0.9A typical) 5-14VDC/2.4-0.9A 5.5mm USB Y-cable (External) USB Cable (Internal) Mounting Screws (Internal Only) SATA Cable (Internal) Power Adapter Cable (Internal Only) RDX Media (with Selected Products) for USB 3.0 for SATA Write Protect Keyed Corner NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. USB Type-C Adapter (External Only)