Pakedge Device & Software K60D Manuals

LED and Interface Descriptions FRONT OF ROUTER LED Status Operation Power Green The router is powered on. Off The router is turned off. Status Green On during start-up or reboot. Off Normal operation. HA Green Unit is being used in an HA cluster. Ports 1 - 7 LINK/ACT Green Port is online (link established). Flashing Green Activity SPEED Green Connected at 1000 Mbps. Amber Connected at 10/100 Mbps. Off Not connected. WAN1,WAN2, DMZ LINK/ACT Green Port is online (link established). Flashing Green Activity SPEED Amber Connected at 10/100 Mbps. Off Not connected. BACK OF ROUTER Interface Type Speed Protocol Description USB Management USB mini-B USB Client port for management Console RJ-45 9600 bps RS-232 serial Optional connection to the management computer. Provides access to the command line interface (CLI). USB USB A USB Optional connection for FortiUSB key, modem, or firmware backup and installation. DMZ RJ-45 10/100/1000 Ethernet Optional connection to a DMZ network WAN1 and WAN 2 RJ-45 10/100/1000 Ethernet Redundant connections to the Internet. Internal RJ-45 10/100/1000 Ethernet 7-port switch connections on the internal network. Reset NA NA NA Resets router to factory defaults. Planning Your Network The Pakedge R60D router is preconfigured to support 5 virtual local area networks (VLANs), each with a different priority level (see example above). Pakedge has a full line of 802.1q (VLAN-capable) wireless access points. Please contact Pakedge for more information. Troubleshooting & Support If you are unable to get the K60D/K60DUTM functional using these steps, you can refer to the full manual on our website or contact the Technical Support team for help. CONTACT INFORMATION: Website: www.pakedge.com Email: [email protected] Phone: (650)385-8703 CUSTOMER SERVICE Email: [email protected] Phone: (650)385-8701 © Pakedge Device & Software Inc. 2014 – All Rights Reserved K60D/ K60DUTM pakedgedevice&software inc. Quick Start Guide K60D: Gigabit preconfigured enterprise-class router—multi VLAN K60DUTM: Gigabit preconfigured enterprise-class router with preloaded network protection-multi VLAN Package Contents: R60D – Audio/video bridging router BR6-03 - Rack mount bracket Power Supply AC/DC (for R60D) Power Cable (US, EUR, UK, AUS/NZ, IT or IN/SA) USB Management Cable 6ft CAT5E Cable (WAN 1 port to internet connection) Quick Start Guide Pakedge Factory Default Settings for K60D / K60DUTM R60D Username and Password pakedge / pakedgef Network Internal Interface (VLAN1) 192.168.1.99 (Router’s Default IP Address) VLAN2 192.168.2.1 VLAN3 192.168.3.1 VLAN4 192.168.4.1 VLAN5 192.168.5.1 VLAN6 (Guest Network) 192.168.6.1 DHCP WAN1 Interface Dynamic IP Service WAN2 Interface Dynamic IP Service DHCP Server on Internal Interface (VLAN1) 192.168.1.110 to 192.168.1.199 DHCP VLAN2 192.168.2.110 to 192.168.2.199 DHCP VLAN3 192.168.3.110 to 192.168.3.199 DHCP VLAN4 192.168.4.110 to 192.168.4.199 DHCP VLAN5 192.168.5.110 to 192.168.5.199 DHCP VLAN6 (Guest Network) 192.168.6.110 to 192.168.6.199 FCC Declaration of Conformity Pakedge Device & Software, 3847 Breakwater Avenue Hayward, CA 94545 declares under sole responsibility that the K60D/K60DUTM complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

USER MANUAL VERSION 1.1 PAKEDGEDEVICE&SOFTWARE INC. K60D PRECONFIGURED AUDIO/VIDEO BRIDGING ROUTER

USER MANUAL VERSION 1.1 PAKEDGEDEVICE&SOFTWARE INC. K60D UTM Manual PRECONFIGURED AUDIO/VIDEO BRIDGING ROUTER