Panasonic 3312F Manuals

Panasonic Electric Works Fire & Security Technology Europe AB Jungmansgatan 12, SE-211 19 Malmö, Sweden Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99 [email protected] • www.panasonic-fire-security.com Fire alarm systems Analog base 3312F / FL • Common base for the different analog detectors • Fast connectors • Label holder recess Common base The analog base 3312F / FL is connected to a COM loop. Analog heat, smoke and multi detector types 33xx / 43xx can be plugged in the base. (See Product Leaflet for the detector type respectively, for type of base.) Fast connectors 3312F has fast connectors (blue) for the COM loop (in/out). 3312FL also has fast connectors (grey) for an external indicator (LED), e.g. 2218. Label holder A label holder could be mounted in the base (in the label holder recess). The label holder is intended for a label showing "zone- address" or "technical number" information, which can be read also when the detector is plugged in the base. Miscellaneous The base has an address label (Al) where the detector's COM loop address is to be written. Individual fault signal is obtained if wrong type of detector (compared with the programming) is plugged in the base or if the detector is unplugged. When a detector with a locking screw is plugged in the base, the detector can be locked in its base to prevent theft. The position of the detector's built-in LED is marked in the base for correct mounting position of the base. For more information regarding detector types, connections, etc. see Planning Instructions and connection diagrams for the system respectively. Product applications Used for analog detectors in the systems EBL512 / 128 / 1000 / 2000. The base is intended for indoor use and in dry premises.