Operating instructions manual [PDF] (44 pages)
- Updated: 19.07.2026
Document Preview & Text Transcription
Cordless Rotary Hammer
Marteau rotatif [sur batterie]
Martillo rotatorio sin cables
Operating Instructions
Instructions d’utilisation
Manual de instrucciones
Model No: EY7880
IMPORTANT
This manual contains safety information. Read manual completely before first using this product and save this
manual for future use.
IMPORTANT
Ce mode d’emploi contient des informations sur la sécurité. Lisez-le en entier avant d’utiliser le produit et
conservez-le pour référence.
IMPORTANTE
Este manual contiene información de seguridad. Lea completamente este manual antes de utilizar por primera
vez este producto, y guárdelo para poder consultarlo en el futuro.
- 2 -
Index/Index/Indice
English: Page 3
Français: Page 16
Español: Página 29
FUNCTIONAL DESCRIPTION
DESCRIPTION DES FONCTIONS
DESCRIPCIÓN FUNCIONAL
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(I)
(P)
(T)
(V)
(W)
(A)
Chuck
Mandrin
Portabroca
(B)
Depth gauge
Jauge de profondeur
Calibre de profundidad
(C)
Hammering/drilling switching lever
Commutateur martelage/perforation Palanca de conmutación de marti-
llo/taladro
(D)
Speed/Blow Mode selection lever
Levier de sélection de vitesse/mode
de souffl erie
Palanca del selector de velocidad/
modo de soplador
(E)
Forward/Reverse lever
Levier d’inversion marche avant-
marche arrière
Palanca de avance/inversión
(F)
Variable speed control trigger
Gâchette de commande de vitesse
Disparador del control de velocided
variable
(G)
Battery holder
Battery holder
Battery holder
(H)
Alignment marks
Marques d’alignement
Marcas de alineación
(I)
Battery pack (EY9L80)
Batterie autonome (EY9L80)
Batería (EY9L80)
(J)
Control panel
Panneau de commande
Panel de controle
(K)
LED light on/off button
Bouton Marche/Arrêt de la lumière DEL Botón ON/OFF de luz LED
(L)
Overheat warning lamp (motor/
battery)
Témoin d’avertissement de
surchauffe (moteur/batterie)
Luz de advertencia de
sobrecalentamiento (motor/batería)
(M)
Battery low warning lamp
Témoin d’avertissement de batterie
basse
Luz de aviso de baja carga de
batería
(N)
Battery pack release button
Bouton de libération de batterie
autonome
Botón de liberación de batería
(O)
Support handle
Manche de support
Mango de soporte
(P)
LED light
Lumière DEL
Luz indicadora
(Q)
Li-ion battery pack dock
Poste d’accueil de la batterie
autonome Li-ion
Enchufe de carga de batería Li-ión
(R)
Battery charger (EY0L80)
Chargeur de batterie (EY0L80)
Cargador de batería (EY0L80)
(S)
Ni-MH/Ni-Cd battery pack dock
Poste d’accueil de la batterie
autonome Ni-MH/Ni-Cd
Enchufe de carga de batería Ni-
MH/Ni-Cd
(T)
Pack cover
Couvercle de la batterie autonome
Cubierta de batería
(U)
Shoulder strap
Dragonne
Correa al hombro
(V)
Grease
Graisse
Grasa
(W)
Dust collection cup (EY9X004E)
Collecteur de poussière (EY9X004E) Fuelle recolector de polvo (EY9X004E)
Ni-MH
Ni-Cd
(R)
(S)
(Q)
(U)
(J)
(O)
(M)
(H)
(N)
(L)
(K)
- 3 -
. GENERAL SAFETY
RULES
WARNING! Read all instructions
Failure to follow all instructions listed below
may result in electric shock, fire and/or
serious injury. The term “power tool” in all
of the warnings listed below refers to your
main operated (corded) power tool and
battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
Work Area Safety
1) Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
2) Do not operate power tools in ex-
plosive atmospheres, such as in
the presence of flammable liq-
uids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
3) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical Safety
1) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching out-
lets will reduce risk of electric shock.
2) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
3) Do not expose power tools to
rain or wet conditions.
Water entering a power tool will in-
crease the risk of electric shock.
4) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords in-
crease the risk of electric shock.
5) When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
Personal Safety
1) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while oper-
ating power tools may result in per-
sonal injury.
2) Use safety equipment. Always
wear eye protection.
Safety equipment such as dust
mask, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
3) Avoid accidental starting. Ensure
the switch is in the off position
before plugging in.
Carrying power tools with your fin-
ger on the switch or plugging in the
power tools that have the switch on
invites accidents.
4) Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
5) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
6) Dress properly. Do not wear
loose clothing or jewelry. Keep
your hair, clothing and gloves
away from moving parts.
Loose clothes, jewelry or long hair
can be caught in moving parts.
7) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce
dust related hazards.
Power Tool Use and Care
1) Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will do the
- 4 -
job better and safer at the rate for
which it was designed.
2) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
3) Disconnect the plug from the pow-
er source and/or the battery pack
from the power tool before making
any adjustments, changing acces-
sories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the pow-
er tool accidentally.
4) Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
5) Maintain power tools. Check for
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may af-
fect the power tools operation. If
damaged, have the power tool re-
paired before use.
Many accidents are caused by
poorly maintained power tools.
6) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions and in the
manner intended for the particu-
lar type of power tool, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
Battery Tool Use and Care
1) Ensure the switch is in the off posi-
tion before inserting battery pack.
Inserting battery pack into pow-
er tools that have the switch on in-
vites accidents.
2) Recharge only with the charger
specified by the manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire
when used with another battery pack.
3) Use power tools only with specif-
ically designated battery packs.
Use of any other battery packs may
create a risk of injury and fire.
4) When battery pack is not in use,
keep it away from other metal ob-
jects like paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals to-
gether may cause burns, or a fire.
5) Under abusive conditions, liq-
uid may be ejected from battery;
avoid contact. If contact acciden-
tally occurs, flush with water. If
liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
Service
1) Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
power tool is maintained.
. SPECIFIC SAFE-
TY RULES
1) Wear ear protectors. Exposure to
noise can cause hearing loss.
2) Use auxiliary handles supplied
with the tool. Loss of control can
cause personal injury.
3) Hold power tools by insulated grip-
ping sur faces when performing an
operation where the cutting tool
may contact hid den wiring.
Contact with a “live” wire will make
ex posed metal parts of the tool
“live” and shock the operator.
4) Be aware that this tool is always in
an operating condition, since it does
not have to be plugged into an elec-
trical outlet.
5) If the bit becomes jammed, imme-
diately turn the trigger switch off
to prevent an overload which can
damage the battery pack or mo-
tor. Use reverse motion to loosen
jammed bits.
Pages Preview:
