Panasonic LP-V Series Manuals

2018.7 panasonic.net/id/pidsx/global Laser Marker External Control Manual LP-400 series LP-V series LP-W series ME-LP400V-EX-6 No. 9000-0062-17V 2 Preface Thank you for purchasing our product. For full use of this product safely and properly, please read this document carefully. This product has been strictly checked and tested prior to its delivery. However, please make sure that this product operates properly before using it. In case that the product becomes damaged or does not operate as specified in this document, contact the dealer you purchased from or our sales office. � General terms and conditions of this document 1. Before using this product, or before every starting operation, please confirm the correct functioning and performance of this product. 2. Contents of this document could be changed without notice. 3. This document must not be partially or totally copied or revised. 4. All efforts have been made to ensure the accuracy of all information in this document. If there are any questions, mistakes, or comments in this document, please notify us. 5. Please remind that we assume no liability for any results arising out of operations regardless of the above clauses. � Disclaimer The applications described in this document are all intended for examples only. The purchase of our products described in this document shall not be regarded as granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as patent rights, with respect to such applications, or that the described application may not infringe any intellectual property rights, such as patent rights, of a third party. � Trademark • Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • QR Code is a registered trademarks of DENSO WAVE INCORPORATED. • Adobe, the Adobe logo, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • All other product names and companies provided in this document are trademarks or registered trademarks of their respective companies. ME-LP400V-EX-6 3 Cautions in Handling To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in minor injury. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbols is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely. This symbols is used to alert users to a specific operating procedure that must be performed carefully. DANGER • Never look at laser beam directly, through lens or through any other optical components. Laser beam radiation into the eye causes blindness or serious damage to the eye. Not only the direct beam of laser, but also diffused reflected beam is harmful. • Never touch laser beam and avoid human skin, clothing and any other flammable object from laser beam exposure directly. Burning into deep skin might result and there is a risk of fire. ALWAYS FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS! ME-LP400V-EX-6

2018.7 panasonic.net/id/pidsx/global Laser Marker Operation / Maintenance Manual LP-400 series LP-V series LP-W series ME-LP400V-OP-6 No.9000-0062-14V Please read these instructions carefully before using this product, and save this manual for future use. 2 Preface Thank you for purchasing our product. For full use of this product safely and properly, please read this document carefully. This product has been strictly checked and tested prior to its delivery. However, please make sure that this product operates properly before using it. In case that the product becomes damaged or does not operate as specified in this document, contact the dealer you purchased from or our sales office. � General terms and conditions of this document 1. Before using this product, or before every starting operation, please confirm the correct functioning and performance of this product. 2. Contents of this document could be changed without notice. 3. This document must not be partially or totally copied or revised. 4. All efforts have been made to ensure the accuracy of all information in this document. If there are any questions, mistakes, or comments in this document, please notify us. 5. Please remind that we assume no liability for any results arising out of operations regardless of the above clauses. � Disclaimer The applications described in this document are all intended for examples only. The purchase of our products described in this document shall not be regarded as granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as patent rights, with respect to such applications, or that the described application may not infringe any intellectual property rights, such as patent rights, of a third party. � Trademark • Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • QR Code is a registered trademarks of DENSO WAVE INCORPORATED. • Adobe, the Adobe logo, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • All other product names and companies provided in this document are trademarks or registered trademarks of their respective companies. ME-LP400V-OP-6 3 Cautions in Handling To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in minor injury. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbols is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely. This symbols is used to alert users to a specific operating procedure that must be performed carefully. DANGER • Never look at laser beam directly, through lens or through any other optical components. Laser beam radiation into the eye causes blindness or serious damage to the eye. Not only the direct beam of laser, but also diffused reflected beam is harmful. • Never touch laser beam and avoid human skin, clothing and any other flammable object from laser beam exposure directly. Burning into deep skin might result and there is a risk of fire. ALWAYS FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS! ME-LP400V-OP-6