Panasonic RR-US006 Manuals

IC Recorder Operating Instructions Model No. RR-US006 12 P This manual was printed with soy based ink. Before connecting, operating or adjusting this prod- uct, please read these instructions completely. Please keep this manual for future reference. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 C 2003 Matsushita Electric Industrial Co., Ltd. Printed in Japan RQT6827-P F0103YH0 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instruc- tions carefully. p Symptom No operation. “U01” appears on the display. “2003” flashes. There is no sound from the earphone or it is difficult to hear or noisy. Recording stops. “––––” appears instead of the recording date. Playback speed is too fast or slow. “FULL” appears. No sound from the speaker. Cannot erase a file or folder. Cannot move a file. A recording disappeared. Available recording time does not increase correspondingly after erasing files. Cannot set timer recording/playback. Timer recording/ playback does not work. Cannot set timer recording/playback at the same time. Timer recording does not work. Cannot use a battery that can be used on other equipment. Cannot select a folder. The unit becomes warm during recharging. Cannot operate while the unit is in the multi cradle. Voice Editor 3 does not start or does not work correctly with the IC recorder. Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or web site (http://www.panasonic.com). Checkpoints ≥The hold function is on. (page 3) ≥Make sure the battery cover is closed. ≥Make sure the battery is correctly inserted. ≥You cannot operate when the unit is connected directly to a computer. To operate it while it is in the multi cradle, press and hold [1/∫] on the cradle for 2 seconds to enable operation. (page 9) ≥The battery has run down. ≥Set the clock. (page 3) ≥Ensure the plug is inserted firmly. ≥Wipe the plug clean. ≥VAS (page 4) may have functioned. ≥Set the clock. (page 3) ≥Set play speed to normal. (page 6) ≥There are 99 files in the folder. ≥There is no remaining recording time. – Erase unneeded files. (page 8) ≥There is no sound when you have connected an earphone. ≥The file is locked. (page 8) ≥The folder is already empty. ≥You cannot move files to folders that already contain 99 files. ≥Recordings can disappear if the unit receives a shock (e.g. it is dropped), or if the battery and cover come loose during recording. ≥This can occur after repeatedly recording and erasing files. Unlock all your files, then erase all folders to remedy this. (page 8) ≥You can set the timers within 24 hours of the current time. ≥Set the clock. (page 3) ≥The settings are canceled if the battery is removed and the clock settings clear. ≥When you set both, only the one you set last works. ≥You cannot set the timer if there is less than one minute of available recording time. ≥This unit determines the battery empty even if there is actually life left in it. This is to preserve the clock and other memory items. ≥Press [$FOLDER/%MENU] briefly. You will enter the menu mode if you hold the button down for 2 or more seconds. ≥The unit normally becomes warm during recharging. ≥Make sure you have inserted a battery. (page 2) ≥Make sure that “PC” is on this unit’s display, and that this unit is recognized as a drive in Voice Editor 3. If it is not, disconnect the USB cable from this unit, then reconnect it. ≥The connection may not work if you connect via a USB hub or USB extension cable. Troubleshooting Guide Maintenance To clean this unit, wipe with a soft, dry cloth. ≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, read the instructions that came with the cloth carefully. 録音 録音/ 停止 停止 The model number and serial num- ber of this product can be found on either the back or the bottom of the unit. Please note them in the space pro- vided below and keep for future ref- erence. MODEL NUMBER SERIAL NUMBER HOLD HOLD ! 録音 録音/ 停止 停止 1 Built-in 2 Recording 3 Display 4 Play/stop button [1/∫] 5 Fast forward, rewind button [:,9] 7 Recording/stop button [REC/STOP] 8 Volume button [r,s] 9 Folder, Menu button [$FOLDER/%MENU] : Erase button [ERASE] < Clip ; Handstrap = Speaker > Battery cover ? External Microphone @ Earphone jack [#] A Hold switch [HOLD] @ Earphone jack [#] B Stand C DC IN 4.8 V 8 Volume button D Charging indicator 7 Recording/stop button [REC/STOP] 5 Fast forward, rewind button [:,9] 4 Play/stop button [1/∫] K( AC adaptor) jack 6 USB terminal ≥Pull out to use. 6 USB terminal V OL UME V OL UME R E C /S T OP R E C /S T OP CHARGE DC IN 4.8V [CHARGE] microphone (not included) hole indicator [r,s] [ ] jack [MIC(PLUG IN POWER)] [USB, ] Control guide Multi cradle Main unit RR-US006