Panasonic SL-SK434 Manuals

Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com Cannot skip albums. Cannot specify point A or B. Cannot change the Digital Re-master mode, anti-skip mode. Digital Re-master does not work. The unit malfunctions when connected to other equipment. Cannot hear the remote control’s operation tone. The remote control does not work properly. Cannot recharge. The AC adaptor becomes warm during recharging. The batteries are taking a long time to recharge. Play time is short after recharging. The battery indicator fails to appear or is incorrect. No play. No sound or there is a lot of noise. Play doesn’t resume from the last point stopped. Play doesn’t start from the first track. The unit stops working. Cannot search through tracks. P Troubleshooting guide 1 The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SL-SK434 SERIAL NUMBER Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 C 2004 Matsushita Electric Industrial Co., Ltd. Printed in China RQT7652-P F0304TT0 p Operating Instructions Portable CD Player SL-SK434 Dear Customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. ≥The HOLD function is on. Release HOLD (➪page 5). ≥The batteries may be depleted (➪page 4). (If play is extremely short even after fully recharging the batteries, the batteries may have exceeded their life. Rechargeable batteries can be recharged approximately 300 times.) ≥The disc isn’t correctly set. ≥The disc is scratched or dirty. (Tracks skipped.) ≥There is moisture on the lens. Wait for about an hour and then try again. ≥The lens is dirty: clean it with a blower (recommended product: SZZP1038C). If the lens gets marked with fingerprints, gently wipe them off with a cotton swab. ≥The unit may not read MP3 correctly if it is shaken while it is reading the files. ≥Play of a multi-session disc may not be possible if there is a blank data segment between sessions. ≥If there is large JPEG data etc. within a MP3 file, sound may become muted and play may not be possible. ≥If you try playing a CD that contains CD-ROM format data and normal audio data (CD-DA), output from one of the above may become silent, and play may not be possible. ≥Ensure the plugs are inserted firmly. ≥Wipe the plugs clean with a clean cloth. ≥Noise may occur when playing MP3 if recording quality is poor. ≥The elapsed playing time disappears and sound is interrupted if bumps continue repeatedly. ≥Separate this unit from mobile telephones. ≥This doesn’t work if you change discs. ≥This doesn’t work during random play. ≥It may not work correctly under some conditions. ≥Random play modes may be on (➪page 6). ≥Play resumes from the last point stopped (➪above). Disconnect then reconnect all power sources (batteries and AC adaptor). You cannot search through MP3 files. You cannot skip between the first and last albums during play. You may not be able to specify point A or B at the end of disc. If [:] or [9] is pressed before [MEMO] you cannot change the mode. Depending on the type of MP3 disc recording, the effect may not appear. Be sure to connect other equipment through the remote control. Speakers connected directly to the unit should have an impedance of 1 k≠or less. The operation tone may be off (➪page 6). Use only the included remote control to operate this unit. ≥You aren’t using the special rechargeable batteries (➪page 4). ≥You must insert two batteries before you can recharge them. ≥The unit must be off before you can recharge. This is normal. The batteries may take a maximum of 4 hours to recharge under some conditions. ≥This may occur after the first time you recharge the batteries or haven’t used them for a long time. Play time should be restored after a few recharges. ≥The batteries can go flat if you leave the AC adaptor connected after recharging is complete. ≥The indicator does not appear when the AC adaptor is connected. ≥The indicator does not appear correctly under some conditions. Playing MP3 This unit can play MP3 files you have recorded to discs. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. HOLD This function causes the unit to ignore accidental button presses. Set to HOLD so the unit doesn’t power on accidentally or interrupt play. ≥The unit and remote control each have independent HOLD switches. Note on CD-R and CD-RW This unit can play CD-R and CD-RW recorded with CD-DA or MP3. Use an audio recording disc for CD-DA and finalize§ it when you finish recording. The unit may not be able to play some discs due to the condition of the recording. §A process performed after recording that enables CD-R/CD-RW players to play audio CD-R and CD-RW. Resume function Play begins from the last point stopped. Replacing the disc cancels the function. Auto off function If the unit is left in stop mode for approximately 10 minutes, the unit turns itself off automatically. Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 3.

Cannot skip albums. Cannot specify point A or B. Cannot change the Digital Re-master mode, anti-skip mode. Digital Re-master does not work. Cannot recharge. The AC adaptor becomes warm during recharging. The batteries are taking a long time to recharge. Play time is short after recharging. The battery indicator fails to appear or is incorrect. Dear Customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. 1 RQT7654-B F0304TT0 Operating Instructions Portable CD Player SL-SK434 Note: “EB” on the packaging indicates the United Kingdom. Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/ EB EG p Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions. Troubleshooting guide ≥The HOLD function is on. Release HOLD (➪page 5). ≥The batteries may be depleted (➪page 4). (If play is extremely short even after fully recharging the batteries, the batteries may have exceeded their life. Rechargeable batteries can be recharged approximately 300 times.) ≥The disc isn’t correctly set. ≥The disc is scratched or dirty. (Tracks skipped.) ≥There is moisture on the lens. Wait for about an hour and then try again. ≥The lens is dirty: clean it with a blower (recommended product: SZZP1038C). If the lens gets marked with fingerprints, gently wipe them off with a cotton swab. ≥The unit may not read MP3 correctly if it is shaken while it is reading the files. ≥Play of a multi-session disc may not be possible if there is a blank data segment between sessions. ≥If there is large JPEG data etc. within a MP3 file, sound may become muted and play may not be possible. ≥If you try playing a CD that contains CD-ROM format data and normal audio data (CD-DA), output from one of the above may become silent, and play may not be possible. ≥Ensure the plugs are inserted firmly. ≥Wipe the plugs clean with a clean cloth. ≥Noise may occur when playing MP3 if recording quality is poor. ≥The elapsed playing time disappears and sound is interrupted if bumps continue repeatedly. ≥This doesn’t work if you change discs. ≥This doesn’t work during random play. ≥It may not work correctly under some conditions. ≥Random play modes may be on (➪page 6). ≥Play resumes from the last point stopped (➪above). Disconnect then reconnect all power sources (batteries and AC adaptor). You cannot search through MP3 files. You cannot skip between the first and last albums during play. You may not be able to specify point A or B at the end of disc. If [:] or [9] is pressed before [MEMO] you cannot change the mode. Depending on the type of MP3 disc recording, the effect may not appear. ≥You aren’t using the special rechargeable batteries (➪page 4). ≥You must insert two batteries before you can recharge them. ≥The unit must be off before you can recharge. This is normal. The batteries may take a maximum of 6 hours to recharge under some conditions. ≥This may occur after the first time you recharge the batteries or haven’t used them for a long time. Play time should be restored after a few recharges. ≥The batteries can go flat if you leave the AC adaptor connected after recharging is complete. ≥The indicator does not appear when the AC adaptor is connected. ≥The indicator does not appear correctly under some conditions. No play. No sound or there is a lot of noise. Play doesn’t resume from the last point stopped. Play doesn’t start from the first track. The unit stops working. Cannot search through tracks. Playing MP3 This unit can play MP3 files you have recorded to discs. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. HOLD This function causes the unit to ignore accidental button presses. Set to HOLD so the unit doesn’t power on accidentally or interrupt play. Note on CD-R and CD-RW This unit can play CD-R and CD-RW recorded with CD-DA or MP3. Use an audio recording disc for CD-DA and finalize§ it when you finish recording. The unit may not be able to play some discs due to the condition of the recording. §A process performed after recording that enables CD- R/CD-RW players to play audio CD-R and CD-RW. Resume function Play begins from the last point stopped. Replacing the disc cancels the function. Auto off function If the unit is left in stop mode for approximately 10 minutes, the unit turns itself off automatically.