Panasonic WV-SW175 Manuals

ideas for life Surveillance, Monitoring & Video Imaging Panasonic System Networks Company of America 2011 video surveillance systems

Outdoor Pan-tilting Network Camera WV-SW175 WV-SW172 HD / 1,280 x 960 H.264 Pan-tilting Network Camera (WV-SW175) SVGA / 800 x 600 H.264 Pan-tilting Network Camera (WV-SW172) Key Features • 720p HD images up to 30 fps (WV-SW175) • 1.3 Megapixel high sensitivity MOS Sensor • Super high resolution at SVGA/800 x 600 created by 1.3 Megapixel high sensitivity MOS Sensor (WV-SW172) • Multiple H.264 (High profile) streams and JPEG streams ensure simultaneous real time monitoring and high resolution recording by “UniPhier®”, Panasonic’s proprietary System LSI platform. • Full frame (Up to 30 fps) transmission at 1,280 x 960 image size (WV-SW175) • Full frame (Up to 30 fps) transmission at SVGA (800 x 600) image size (WV-SW172) • Wide Dynamic Range and ABS (Adaptive Black Stretch) technologies deliver wider dynamic range compared with conventional cameras. • Face Wide Dynamic Range technology ensures clear face image. • High sensitivity with Day & Night (Electrical) function: 0.6 lx (Color), 0.5 lx (B/W) at F2.2 • Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions. • Progressive scan ensures clear images with less motion blur and no tearing even when the subject is moving. • Electronic sensitivity enhancement: Auto (Up to 16x) / OFF • Selectable light control modes: Indoor scene (50 Hz) / Indoor scene(60Hz) / ELC (maximum exposure time) Indoor scene (50 Hz/60Hz): Flicker caused by fluorescent lightning will be automatically compensated. ELC (maximum exposure time): The lightning control will be automatically performed by adjusting shutter speed in the range of ELC. • 2x extra zoom at VGA resolution • 8x digital zoom controlled by browser • VMD (Video Motion Detection) with 4 programmable detection areas, 15 steps sensitivity level and 10 steps detection size • Face detection function detects the position of human face and the information is sent by XML or video stream. • Meta data for VMD works with the WJ-ND400 playback VMD function. • Privacy Zone can mask up to 2 private areas, such as house windows and entrances/exits. • Camera title display: Up to 20 alphanumeric characters on the browser • Alarm sources including VMD and Panasonic alarm command can trigger actions such as FTP image transfer, E-mail notification, Indication on browser, and Panasonic alarm protocol output. • JPEG Image compression ratio can be changed by alarm so that higher quality image can be provided. • Prioritized stream control: One of the video streams can be prioritized when multiple recorders or client PCs are accessing the camera so that the recorder or the client PC can maintain the frame rate. • SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (JPEG) • H.264 max. bit rate/client and Total bit rate control allows flexible network traffic management. Frame rate priority mode controls bit rate and compression ratio to provide the specified frame rate. • Internet mode: H.264 images can be transmitted over HTTP protocol. • Multi-language: English / Italian / French / German / Spanish / Russian / Chinese / Japanese • IPv4/IPv6 protocol supported • Supports SSL, DDNS (viewnetcam, RFC2136) • Still images (JPEG) can be viewed on mobile phones via Internet. • Onvif compliant model • Panning/tilting and Preset Map Shot function realizes wide range monitoring..(Horizontal angle:180° Vertical angle 123°) • Easy installation: Easy to adjust directions. • Interactive communication with audio: By using the audio output connector and the microphone in connector, receiving audio from the cameras on a PC and transmitting audio from the PC to the cameras is available. • IP55 rated water and dust resistant. Compatible with IEC60529 • Best effort on Transmission priority: In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate varying between the maximum and minimum bit rates that are set for “Max bit rate (per client)”. WV-SW175 WV-SW172 (WV-SW175) Standard Accessories • Installation Guide .......................... 1 pc. • CD-ROM*1 ......................................1 pc. • Code label*2 ....................................1 pc. • Flexible Stand ................................1 pc. • Connector Cover ............................1 pc. • Sunshade .......................................1 pc. • Foam Strip ......................................1 pc. • Power cable plug ............................1 pc. *1 The CD-ROM contains the operating instructions and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label.

Refer installation work to the dealer. • Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer. • Stop the operation immediately when something is wrong with this product. • When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product has deteriorated, continued use will cause a fire or fall of the product resulting in injury, or damage to the product. Turn the power off immediately and contact qualified service personnel for service. • Select an installation area that can support the total weight. • Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in injury. Installation work shall be started after sufficient reinforcement. • Periodic inspections shall be conducted. • Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents. Consult the dealer for the inspections. • The screws and bolts must be tightened to the specified torque. • Failure to observe this may cause a drop resulting in injury or accidents. Do not install this product in locations subject to vibration. • Loosening of mounting screws or bolts may cause a fall of the product resulting in injury. The measures of protection against a fall of this product shall be taken. • Failure to observe this may cause a drop resulting in injury or accidents. Be sure to install the safety wire. Install this product in a location high enough to avoid people and objects from • bumping the product. Failure to observe this may cause a drop resulting in injury or accidents. Turn the power off when do wiring of this product. • Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire. Do not attempt to disassemble or modify this product. • Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections. Do not insert any foreign objects. • This could permanently damage this product. Turn the power off immediately and contact qualified service personnel for service. Do not use this product in an inflammable atmosphere. • Failure to observe this may cause an explosion resulting in injury. Avoid installing this product in the locations where salt damage occurs or • corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of the product may occur. Do not strike or give a strong shock to this product. • Failure to observe this may cause fire or injury. Do not rub the edges of metal parts with your hand. • Failure to observe this may cause injury. Do not touch this product or the connected cables during thunder (even in the • process of work). Failure to observe this may cause electric shock. Keep SDHC/SD memory cards (option) away from infants and children. • Otherwise, they may swallow the cards by mistake. In this case, consult a doctor immediately. • Installation Guide Included Installation Instructions Network Camera Model No. WV-SW175/WV-SW172 Option Precautions for use Precautions for Installation Standard accessories This product has no power switch. When turning off the power, disconnect the power supply from the 12 V DC power supply or the PoE device. (When using both the 12 V DC power supply and the PoE device for power supply, dis- connect both the connections.) To keep on using with stable performance Do not use this camera in hot and humid conditions for a long time. Failure to observe this causes component degradation resulting in life shortening of this product. Do not expose this camera to direct heat sources such as a heater. Do not touch the lens cover with your bare hands. A dirty lens cover causes deterioration of picture quality. Handle this camera with care. Do not drop this camera, nor apply shock or vibration to this camera. Failure to observe this may cause trouble. About the PC monitor Displaying the same image on a monitor for a long time may damage the monitor. It is recommend- ed to use a screen-saver. When an error is detected, this product will restart automatically. This product will be inoperable for around 2 minutes after the restart just as when the power is turned on. Product disposal/transfer Data saved on this product or a storage device used with this product may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on this product. Cleaning this product body Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration. When the dirt is hard to remove, use a damp cloth and wipe the dirty areas. Then, wipe with a dry cloth to remove any moisture. Transmission interval Image transmission interval may become slow depending on the network environment, PC performance, shooting subject, access number, etc. About SD memory card When using an unformatted SD memory card, format it using this camera. Recorded data on the ● SD memory card will be deleted when formatted. If an unformatted SD memory card or an SD memory card formatted with other devices is used, this product may not work properly or perfor- mance deterioration may be caused. Refer to the Operating Instructions (included in the CD-ROM) for how to format a SD memory card. When some SD memory cards are used with this product, the product may not work properly or ● performance deterioration may be caused. Use the SD memory cards recommended. Code label The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recommended to paste one of the labels onto the CD-ROM case. About the MOS image sensor When continuously shooting a bright light source such as a spotlight, the color filter of the MOS ● image sensor may have deteriorated and it may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discolor- ation may remain. When shooting fast-moving subjects or performing panning/tilting operations, objects crossing ● the shooting area may look to be bending askew. AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM Flickering Due to the influence of lighting, flickering may sometimes happen. In this case, select “Indoor scene” for “Light control mode”. Select “Indoor scene(50Hz)” or “Indoor scene(60Hz)” in accor- dance with the power supply frequency in your locality. Refer to the Operating Instructions (included in the CD-ROM) for further information about the setting. Under extremely strong lighting, flickering may happen even when “Indoor scene” is selected for “Light control mode”. When the brightness (illuminance) level on the screen is set to a relatively low level with the [Brightness] buttons, flickering may frequently happen. In such cases, either of the fol- lowing can reduce flickering. Moderate the illumination intensities of objects by changing the camera direction. ● Set the brightness (illuminance) level on the screen to a brighter level with the [Brightness] buttons. ● White-out on images caused by the effect of light control mode When “Indoor scene” is selected for “Light control mode”, the tone of the brighter parts on the screen may be deteriorated than the case when “ELC” is selected. Color blurring on detailed drawing patterns When there are detailed drawing patterns on images, color blurring may happen over these parts. Consumable parts The following are consumables: Replace them in accordance with their lives. Their lives vary depending on use environment and conditions. Lifetime is just an indication when using the camera at +20 °C {68 °F}. Panning motor, tilting motor, flat cable for tilting: Approx. 3.7 million operations. ● Lens and pan/tilt head If a lens and pan/tilt head are not performed for a long period of time, the grease coating inside these parts may become sticky. That may obstruct the parts from moving. To prevent this, move the lens or pan/tilt head periodically. Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Installation area for this product Select an appropriate place for the installation area (such as a strong wall or ceiling) in your par- ● ticular environment. Avoid installing the camera in locations where it can be exposed to direct sunlight or rain from all ● directions. Install the camera in an appropriate location such as on an exterior wall of a building. Do not place this product in the following places: Locations where a chemical agent is used such as a swimming pool ● Locations subject to humidity, dust, steam and oil smoke ● Locations that have a specific environment that is subject to an inflammable atmosphere or solvents ● Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated ● Locations where corrosive gas is produced, Locations where it may be damaged by briny air ● such as seashores Locations where the temperature is not within the specified range (-20°C to +50°C ● {-4°F to +122°F}). Locations subject to vibrations (This product is not designed for on-vehicle use.) ● Locations subject to condensation as the result of severe changes in temperature ● Be sure to remove this product if it is not in use. Before installation When this camera is mounted on a wooden ceiling or a wall, use the wood screws (accessory, ● Screw B). Screws to be used for other materials are not provided. Prepare the screws according to the material, structure, strength and other factors of the mounting area and the total weight of objects to be mounted. Ensure that the mounting surface, anchor and screws are sufficiently strong. ● Do not mount this product on a plaster board or a wooden section because they are too weak. If ● this product is unavoidably mounted on such a section, the section shall be sufficiently reinforced. Design and engineer the power supply system to turn on/off the power of this product. The product has no power switch. When installing the product, use a power supply device equipped with the ON-OFF switch for servicing. About the network connection When connecting to a network using the network cable of this product, observe the following. When wiring for the network, design and engineer not to be affected by thunder. Screw tightening The screws and bolts must be tightened with an appropriate tightening torque according to the ● material and strength of the installation area. Do not use an impact driver. Use of an impact driver may damage the screws or cause tighten- ● ing excessively. When a screw is tightened, make the screw at a right angle to the surface. After tightening the ● screws or bolts, perform visual check to ensure tightening is enough and there is no backlash. Procure fixing screws that are not made to be used with wooden surfaces separately. The fixing screws supplied with this product are only for use with wooden surfaces. Required pull-out capacity of a single screw/bolt is 294 N {66.09 lbf} or more. Fall prevention measures When the external safety wire is connected, select a connection point resulting in that nothing will hit people after the stand is damaged. Do not remove or loosen the internal camera screws. Do not loosen the internal camera screws. Otherwise, water exposure may cause damage or mal- function of camera, or camera dropping may result in injury. Radio disturbance When this product is used near TV/radio antenna, strong electric field or magnetic field (near a motor, a transformer or a power line), images may be distorted and noise sound may be produced. PoE (Power over Ethernet) Use a PoE hub/device that is compliant with IEEE802.3af standard. Router When connecting this product to the Internet, use a broadband router with the port forwarding function (NAT, IP masquerade). Refer to the Operating Instructions (included in the CD-ROM) for fur- ther information about the port forwarding function. Time & date setting It is necessary to set the time & date before putting this product into operation. Refer to the Operating Instructions on the provided CD-ROM for descriptions of how to perform the settings. CPU: Intel ® Core TM 2 Duo 2.4 GHz or faster recommended Memory: 512 MB or more (A minimum of 1 GB memory is required when using Microsoft ® Windows ® 7 or Microsoft ® Windows Vista ®.) Network interface: 10BASE-T/100BASE-TX 1 port Monitor: Image capture size: 1024 x768 pixels or more Color: 24-bit True color or better OS: Microsoft ® Windows ® 7 Microsoft ® Windows Vista ® Microsoft ® Windows ® XP SP3 Web browser: Windows ® Internet Explorer ® 9.0 (32-bit) Windows ® Internet Explorer ® 8.0 (32-bit) Windows ® Internet Explorer ® 7.0 (32-bit) Microsoft ® Internet Explorer ® 6.0 SP3 Others: CD-ROM drive (It is necessary to read the operating instructions and use the software on the provided CD-ROM.) DirectX ® 9.0c or later Adobe ® Reader ® (It is necessary to view PDF file on the provided CD-ROM.) IMPORTANT When using a PC that does not meet the above requirements, displaying of images may ● become slower or the web browser may become inoperable. Microsoft Windows 7 Starter, Microsoft Windows Vista Starter and Microsoft Windows XP ● Professional 64-bit Edition are not supported. When using IPv6 for communication, use Microsoft Windows7 or Microsoft Windows Vista. ● Note For further information about PC system requirements and precautions for when using ● Microsoft Windows 7, Microsoft Windows Vista, or Windows Internet Explorer, click “Manual” - “Open” from the supplied CD-ROM and refer to “Notes on Windows ® / Internet Explorer ® versions”. If using Microsoft Windows XP, screen tearing* may occur when the shooting scene drastically ● changes (for example, while shooting fast-moving subjects) due to the GDI restrictions of the OS. * A phenomenon in which portions of the screen are displayed out of alignment. For information on the operation verification of the supported operating systems and web ● browsers, refer to our website (http://security.panasonic.com/pss/security/support/index.html). System requirements for a PC Flexible Stand (1 pc.) Connector Cover (1 pc.) Sunshade (1 pc.) Screw A (5 pcs.) Screw B (4 pcs.) Washer S (1 pc.) Washer L (1 pc.) Safety Wire (1 pc.) Self Bonding Tape (1 pc.) Foam Strip (1 pc.) Power cable plug (1 pc.) Installation Guide (this document) .........(1 set) Warranty card .......................................(1 set) CD-ROM* 1 ............................................ (1 pc.) Code label* 2.......................................... (1 pc.) *1 The CD-ROM contains the operating instructions and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label. Main functions ● Corresponding to outdoor use This unit complies with waterproof and is able to install outdoors. (JIS C0920 compliant IP55) ● H.264 and JPEG triple encoding A total of 3 outputs, comprising of 2 H.264 outputs and 1 JPEG output, can be provided. ● Power over Ethernet function When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply connecting a LAN cable. (IEEE802.3af compliant) ● Adaptive darkness correction mode Corrects the blacked-out parts of dark areas of objects that have different illumination intensities. ● Panning/tilting function and preset position function A single camera provides wide area monitoring. ● Interactive communication with audio By using the audio output connector and the microphone in connector, receiving audio from the cameras on a PC and transmitting audio from the PC to the cameras is available. ● SDHC/SD memory card slot equipped It is possible to save H.264 videos and JPEG images on the SDHC/SD memory card manually at an alarm occurrence, during the period of the schedule, or on a web browser. It is also possible to save JPEG images at a network failure occurrence. (Download is possible.) Adobe, Acrobat Reader, and Reader are either registered trademarks or trademarks of Adobe ● Systems Incorporated in the United States and/or other countries. Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either registered ● trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. ● Intel and Intel Core are trademarks or registered trademarks of Intel Corporation in the United ● States and other countries. SDHC Logo is a trademark of SD-3C, LLC. ● iPad, iPhone, and iPod touch are registered trademarks of Apple Inc., registered in the U.S. and ● other countries. Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions. ● All other trademarks identified herein are the property of their respective owners. ● Trademarks and registered trademarks Confirm the following items are included in the camera’s packaging. You will need the following additional items to install and configure the camera. [Locally procured] PoE device (When supplying the power using the PoE device) ● a PC (see the system requirements in the Important Information document) ● a router ● a LAN cable (CAT-5 straight cable) ● AC Adaptor (1 pc.) ● * ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1). As you will use this unit connected to a network, your attention is called to the following security risks.  Leakage or theft of information through this unit  Use of this unit for illegal operations by persons with malicious intent  Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. U ● se this unit in a network secured by a firewall, etc. If this unit is connected to a network that includes PCs, make sure that the system is not infected by computer ● viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.). Protect your network against unauthorized access by restricting users to those who log in with ● an authorized user name and password. Apply measures such as user authentication to protect your network against leakage or theft of ● information, including image data, authentication information (user names and passwords), alarm mail information, FTP server information and DDNS server information. After the unit is accessed by the administrator, make sure to close the browser. ● Change the administrator password periodically. ● Do not install the camera in locations where the camera or the cables can be destroyed or dam- ● aged by persons with malicious intent. Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Cause/solution Power is not turned on.  Are the PoE device and the network cable of the camera ● connected using a LAN cable?  Check whether the connection is appropriately established. Depending on the PoE device, the power supply will stop ● when the demanded power exceeds its total power limit for all PoE ports.  Refer to the operating instructions of the PoE device in use. Distributing, copying, disassembling, reverse compiling and reverse engineering of the software pro- vided with this product are all expressly prohibited. In addition, exporting any software provided with this product violating export laws is prohibited. Precautions Specifi cations Limitation of liability Disclaimer of warranty Copyright ● Basic Power source: PoE (IEEE802.3af compliant), 12 V DC Power consumption: PoE: 130 mA (Class 2 device), 12 V DC: 430 mA Ambient operating temperature: -20 °C to +50 °C {-4 °F to +122 °F} Ambient operating humidity: Less than 90 % (no condensation) Monitor output: VBS: 1.0 V [p-p]/75 Ω, composite (BNC), ø3.5 mm mini jack EXT I/O terminal cable: ALARM IN 1, ALARM IN 2/ ALARM OUT, ALARM IN 3/ AUX OUT, GND, 12 V DC Microphone/Line input: For microphone input For line input ø3.5 mm monaural mini jack Input impedance: Approx. 2.2 kΩ Applicable microphone: Plug-in power type Supply voltage: 3.3 V ±0.5 V Input level: Approx. –10 dBV Audio output: ø3.5 mm stereo mini jack (monaural output) Output impedance: Approx. 560 Ω Line level Dustproof/ Waterproof: IP55* * Only when installation work specified in this book is properly per- formed and appropriate waterproof treatment is performed Dimensions: 100 mm (W) x 100 mm (H) x 74 mm (D) {3-15/16 inches (W) x 3-15/16 inches (H) x 2-29/32 inches (D)} (excluding projection) Mass: Main body: 350 g {0.77 lbs} Finish: Main body : PC/ABS resin, silver Dome section: Clear polycarbonate resin ● Camera Image sensor: 1/4 type MOS image sensor Effective pixels: Approx. 1.3 megapixels Scanning area: 3.52 mm (H) × 2.64 mm (V) {1/8 inches (H) x 3/32 inches (V)} Scanning system: Progressive Minimum illumination: Color: 0.6 lx {0.06 footcandle} (F2.2, Auto slow shutter: Off (1/30 s), Gain: On (High)) 0.038 lx {0.0038 footcandle} (F2.2, Auto slow shutter: max. 16/30 s, Gain: On (High))* BW: 0.5 lx {0.05 footcandle} (F2.2, Auto slow shutter: Off (1/30 s), Gain: On (High)) 0.031 lx {0.0031 footcandle} (F2.2, Auto slow shutter: max. 16/30 s, Gain: On (High))* * Converted value Wide dynamic range: On/Off Face WDR: On/Off Gain (AGC): On (Low)/ On (Mid)/ On (High)/ Off Adaptive black stretch: On/Off Light control mode setting: Indoor scene (50Hz/60Hz)/ELC ELC (Maximum exposure time): ELC(1/30 s), ELC(3/100 s), ELC(3/120 s), ELC(2/100 s), ELC(2/120 s), ELC(1/100 s), ELC(1/120 s), ELC(1/250 s), ELC(1/500 s), ELC(1/1000 s), ELC(1/2000 s), ELC(1/4000 s), ELC(1/10000 s) Auto slow shutter: Off (1/30 s), Max. 2/30s, Max. 4/30s, Max. 6/30s, Max. 10/30s, Max. 16/30s Day & Night (electrical): Off/Auto White balance: ATW1/ ATW2/ AWC Digital noise reduction: High/Low Video analytics Face detection*: On/Off (with the XML notification setting) Privacy zone: On/Off (up to 2 zones available) Camera title on screen: Up to 20 characters (alphanumeric characters, marks), On/Off Video motion detection (VMD alarm): On/Off, (available at each preset) * To use the “XML notification” and “Face detection” functions, you need to install the extension software. ● Lens Zoom ratio: Extra zoom: 2x (under VGA resolution) Digital (electronic) zoom: 8x (Max 16x combined with Extra Zoom under VGA) Focal length: 1.95 mm Maximum aperture ratio: 1: 2.2 Focus range: ∞ - 0.5 m Angular field of view: Horizontal: 85°, Vertical: 68° ● Panning/tilting platform Panning range: -47.5°- +47.5° Panning speed: Manual: Approx. 5 °/s - 80 °/s, Preset: Up to approx. 80 °/s Tilting range: -45° to +10° Tilting speed: Manual: Approx. 5 °/s - 80 °/s, Preset: Up to approx. 80 °/s Number of the preset positions: 64 Map shot: Preset map-shot Self return: 10 s/ 20 s/ 30 s/ 1 min/ 2 min/ 3 min/ 5 min/ 10 min/ 20 min/ 30 min/ 60 min Network security WARNING CAUTION Turn the power off when cleaning this product. • Failure to observe this may cause injury. ● Network Network: 10BASE-T/100BASE-TX, RJ45 connector Resolution: WV-SW175: Imaging mode: 4:3 H.264 1280x960/ VGA (640x480)/ QVGA (320x240) max.30 fps JPEG 1280x960/ VGA (640x480)/ QVGA (320x240) max.30 fps Imaging mode: 16:9 H.264 1280x720/ 640x360/ 320x180 max.30 fps JPEG 1280x720/ 640x360/ 320x180 max.30 fps WV-SW172: Aspect ratio: 4:3 H.264 SVGA(800x600)/ VGA(640x480)/ QVGA(320x240) max. 30 fps JPEG SVGA(800x600)/ VGA(640x480)/ QVGA(320x240) max. 30 fps Aspect ratio: 16:9 H.264 640x360/ 320x180, max. 30 fps JPEG 640x360/ 320x180, max. 30 fps Image compression method: *1 H.264 Image quality: Low/ Normal/ Fine Transmission type: Unicast/Multicast Bit rate: Constant bit rate/ Best effort/ Advanced VBR: 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/ 1024 kbps/ 1536 kbps/ 2048 kbps/ 3072 kbps/ 4096 kbps/ 8192 kbps Frame rate: 1 fps/ 3 fps/ 5 fps/ 7.5 fps/ 10 fps/ 12 fps/ 15 fps/ 20 fps/ 30 fps JPEG Image quality: 0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/ 9 LOW (10 steps: 0-9) Transmission type: PULL/PUSH Transmission interval: 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264/ images.) Audio compression method: G.726 (ADPCM) 32 kbps/ 16 kbps G.711 64 kbps Bandwidth control: Unlimited/ 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/ 1024 kbps/ 2048 kbps/ 4096 kbps/ 8192 kbps Protocol: IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, MLD, ICMP, ARP IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP Maximum concurrent access number: 14 (Depends on network conditions) FTP client: Alarm image transmission, FTP periodic transmission Multi-screen: Up to 16 camera images can be displayed simultaneously on a multi- screen. (Including the camera itself) Compatible SDHC/ SD memory card (option): Manufactured by Panasonic (SD speed class 4 or higher) SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) Cellular phone compatibility: JPEG image, panning/tilting/zoom control, AUX control (by access level) Mobile terminal compatibility: (As of October, 2013) *2 iPad, iPhone, iPod touch (iOS 4.2.1 or later) Android TM mobile terminals *1 Transmission for 2 streams can be individually set in the same compression method. *2 For further information about compatible devices, refer to our website (http://security.panasonic.com/pss/security/support/info.html). ● Optional accessories User License Accessory (For H.264) BB-HCA8A BB-HCA8CE Troubleshooting Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6) Do not install near any heat sources such as radiators, heat registers, stoves, or other appara- tus (including amplifiers) that produce heat. 7) Only use attachments/accessories specified by the manufacturer. 8) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. S3125A 9) Unplug this apparatus during lightning storms or when unused for long periods of time. 10) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT; (2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER; (3) ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THE MALFUNCTION OR TROUBLE; (4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT; (5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY; (6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA’S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE; (7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. This document is the Installation Guide for use in other countries except Japan. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall/ceiling in accor- ● dance with the installation instructions. The installation shall be carried out in accordance with all applicable installation rules. ● The connections should comply with local electrical code. ● For U.S.A This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - spe- cial handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ For Canada CAN ICES-3(A)/NMB-3(A) For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not express- ly approved by the party responsible for compliance could void the user’s authority to operate this equipment. For U.S.A The model number and serial number of this product may be found on the surface of the unit. You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. _________________________________ Serial No. __________________________________ For Europe We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standard or other normative document following the provisions of Directive 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Norm oder normativen Dokument übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2004/108/EC. Nous déclarons sous notre propre responsabilité que le produit auquel se réfère la présente déclaration est conforme á la norme spécifiée ou à tout autre document normatif conformément aux dispositions de la directive 2004/108/CE. Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con la norma u otro documento normativo siguiendo las estipu- laciones de la directiva 2004/108/CE. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme al seguente standard o altro documento normativo conforme alle disposizioni della direttiva 2004/108/CE. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende norm of ander normatief dokument, overeenkomstig de bepalingen van Richtlijn 2004/108/EC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i over- ensstemmelse med standard eller andre normative dokumenter i følgebestemmelserne i direktiv 2004/108/EC. Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument eller annat normativt dokument som framställs i direktiv 2004/108/EC. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavaa standardia tai muuta ohjeellista asiakirjaa, jotka noudattavat direktiivin 2004/108/EC säädöksiä. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overens- stemmelse med følgende norm eller andre normgivende dokumenter som følger bestemmelsene i direktiv 2004/108/EC. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national leg- islation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the envi- ronment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Cd [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. About the user manuals There are 2 sets of operating instructions for the WV-SW175, WV-SW172 as follows. Installation Guide: Explains how to install and connect devices, as well as how to connect and ● configure the network. Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how ● to operate this camera. Adobe ® Reader ® is required to read these operating instructions on the provided CD-ROM. When the Adobe ® Reader ® is not installed on the PC, download the latest Adobe Reader from the Adobe web site and install it. “SW175, SW172” shown in the instructions and illustrations used in these operating instructions indicates the WV-SW175, WV-SW172. English screens are used in these operating instructions. For Europe and other countries: Panasonic Corporation http://panasonic.net Panasonic System Networks Co., Ltd. Fukuoka, Japan Authorised Representative in EU: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany For U.S. and Canada: Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic System Networks Co., Ltd. 2013 avs1013-0 PGQX1451ZA Printed in China

Outdoor Pan-tilt Network Camera HD / 1,280 x 960 H.264 Pan-tilt Network Camera (WV-SW175) SVGA / 800 x 600 H.264 Pan-tilt Network Camera (WV-SW172) Key Features • 720p HD images up to 30 fps (WV-SW175) • 1.3 Megapixel high sensitivity MOS Sensor • Super high resolution at SVGA/800 x 600 created by 1.3 Megapixel high sensitivity MOS Sensor (WV-SW172) • Multiple H.264 (High profile) streams and JPEG streams ensure simultaneous real time monitoring and high resolution recording by “UniPhier®”, Panasonic’s proprietary System LSI platform. • Full frame (Up to 30 fps) transmission at 1,280 x 960 image size (WV-SW175) • Full frame (Up to 30 fps) transmission at SVGA (800 x 600) image size (WV-SW172) • Wide Dynamic Range and ABS (Adaptive Black Stretch) technologies deliver wider dynamic range compared with conventional cameras. • Face Wide Dynamic Range technology ensures clear face image. • High sensitivity with Day & Night (Electrical) function: 0.6 lx (Color), 0.5 lx (B/W) at F2.2 • Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions. • Progressive scan ensures clear images with less motion blur and no tearing even when the subject is moving. • Electronic sensitivity enhancement: Auto (Up to 16x) / OFF • Selectable light control modes: Indoor scene (50 Hz) / Indoor scene(60Hz) / ELC (maximum exposure time) Indoor scene (50 Hz/60Hz): Flicker caused by fluorescent lightning will be automatically compensated. ELC (maximum exposure time): The lightning control will be automatically performed by adjusting shutter speed in the range of ELC. • 2x extra zoom at VGA resolution • 8x digital zoom controlled by browser • VMD (Video Motion Detection) with 4 programmable detection areas, 15 steps sensitivity level and 10 steps detection size • Privacy Zone can mask up to 2 private areas, such as house windows and entrances/exits. • Camera title display: Up to 20 alphanumeric characters on the browser • Alarm sources including VMD and Panasonic alarm command can trigger actions such as FTP image transfer, E-mail notification, Indication on browser, and Panasonic alarm protocol output. • JPEG Image compression ratio can be changed by alarm so that higher quality image can be provided. • Prioritized stream control: One of the video streams can be prioritized when multiple recorders or client PCs are accessing the camera so that the recorder or the client PC can maintain the frame rate. • SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (JPEG) • H.264 max. bit rate/client and Total bit rate control allows flexible network traffic management. Frame rate priority mode controls bit rate and compression ratio to provide the specified frame rate. • Internet mode: H.264 images can be transmitted over HTTP protocol. • Multi-language: English / Italian / French / German / Spanish / Russian / Chinese / Japanese • IPv4/IPv6 protocol supported • Supports SSL, DDNS (viewnetcam, RFC2136) • Still images (JPEG) can be viewed on mobile phones via Internet. • Onvif compliant model • Pan-tilt and Preset Map Shot function realizes wide range monitoring.(Horizontal angle:180° Vertical angle 123°) • Easy installation: Easy to adjust directions. • Interactive communication with audio: By using the audio output connector and the microphone in connector, receiving audio from the cameras on a PC and transmitting audio from the PC to the cameras is available. • IP55 rated water and dust resistant. Compatible with IEC60529 • Best effort on Transmission priority: In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate varying between the maximum and minimum bit rates that are set for “Max bit rate (per client)”. WV-SW175 WV-SW172 WV-SW175 WV-SW172 (WV-SW175) Standard Accessories • Installation Guide .......................... 1 pc. • CD-ROM*1 ......................................1 pc. • Code label*2 ....................................1 pc. • Flexible Stand ................................1 pc. • Connector Cover ............................1 pc. • Sunshade .......................................1 pc. • Foam Strip ......................................1 pc. • Power cable plug ............................1 pc. *1 The CD-ROM contains the operating instructions and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label.

Option Precautions for use Precautions for Installation Standard accessories This product has no power switch. When turning off the power, disconnect the power supply from the 12 V DC power supply or the PoE device. (When using both the 12 V DC power supply and the PoE device for power supply, dis- connect both the connections.) To keep on using with stable performance Do not use this camera in hot and humid conditions for a long time. Failure to observe this causes component degradation resulting in life shortening of this product. Do not expose this camera to direct heat sources such as a heater. Do not touch the lens cover with your bare hands. A dirty lens cover causes deterioration of picture quality. Handle this camera with care. Do not drop this camera, nor apply shock or vibration to this camera. Failure to observe this may cause trouble. About the PC monitor Displaying the same image on a monitor for a long time may damage the monitor. It is recommend- ed to use a screen-saver. When an error is detected, this product will restart automatically. This product will be inoperable for around 2 minutes after the restart just as when the power is turned on. Product disposal/transfer Data saved on this product or a storage device used with this product may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on this product. Cleaning this product body Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration. When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product. When the dirt is hard to remove, use a damp cloth and wipe the dirty areas. Then, wipe with a dry cloth to remove any moisture. Transmission interval Image transmission interval may become slow depending on the network environment, PC performance, shooting subject, access number, etc. About SD memory card When using an unformatted SD memory card, format it using this camera. Recorded data on the ⿟ SD memory card will be deleted when formatted. If an unformatted SD memory card or an SD memory card formatted with other devices is used, this product may not work properly or perfor- mance deterioration may be caused. Refer to the Operating Instructions (included in the CD-ROM) for how to format a SD memory card. When some SD memory cards are used with this product, the product may not work properly or ⿟ performance deterioration may be caused. Use the SD memory cards recommended. Code label The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recommended to paste one of the labels onto the CD-ROM case. About the MOS image sensor When continuously shooting a bright light source such as a spotlight, the color filter of the MOS ⿟ image sensor may have deteriorated and it may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discolor- ation may remain. When shooting fast-moving subjects or performing panning/tilting operations, objects crossing ⿟ the shooting area may look to be bending askew. AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM Flickering Due to the influence of lighting, flickering may sometimes happen. In this case, select “Indoor scene” for “Light control mode”. Select “Indoor scene(50Hz)” or “Indoor scene(60Hz)” in accor- dance with the power supply frequency in your locality. Refer to the Operating Instructions (included in the CD-ROM) for further information about the setting. Under extremely strong lighting, flickering may happen even when “Indoor scene” is selected for “Light control mode”. When the brightness (illuminance) level on the screen is set to a relatively low level with the [Brightness] buttons, flickering may frequently happen. In such cases, either of the fol- lowing can reduce flickering. Moderate the illumination intensities of objects by changing the camera direction. ⿟ ⿟Set the brightness (illuminance) level on the screen to a brighter level with the [Brightness] buttons. White-out on images caused by the effect of light control mode When “Indoor scene” is selected for “Light control mode”, the tone of the brighter parts on the screen may be deteriorated than the case when “ELC” is selected. Color blurring on detailed drawing patterns When there are detailed drawing patterns on images, color blurring may happen over these parts. Consumable parts The following are consumables: Replace them in accordance with their lives. Their lives vary depending on use environment and conditions. Lifetime is just an indication when using the camera at +20 °C {68 °F}. Panning motor, tilting motor, flat cable for tilting: Approx. 3.7 million operations. ⿟ Lens and pan/tilt head If a lens and pan/tilt head are not performed for a long period of time, the grease coating inside these parts may become sticky. That may obstruct the parts from moving. To prevent this, move the lens or pan/tilt head periodically. Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Installation area for this product Select an appropriate place for the installation area (such as a strong wall or ceiling) in your par- ⿟ ticular environment. Avoid installing the camera in locations where it can be exposed to direct sunlight or rain from all ⿟ directions. Install the camera in an appropriate location such as on an exterior wall of a building. Do not place this product in the following places: Locations where a chemical agent is used such as a swimming pool ⿟ Locations subject to humidity, dust, steam and oil smoke ⿟ Locations that have a specific environment that is subject to an inflammable atmosphere or solvents ⿟ Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated ⿟ Locations where corrosive gas is produced, Locations where it may be damaged by briny air ⿟ such as seashores Locations where the temperature is not within the specified range (-20° to +50°{-4° to +122°F}). ⿟ Locations subject to vibrations (This product is not designed for on-vehicle use.) ⿟ Locations subject to condensation as the result of severe changes in temperature ⿟ Be sure to remove this product if it is not in use. Before installation When this camera is mounted on a wooden ceiling or a wall, use the wood screws (accessory, ⿟ Screw B). Screws to be used for other materials are not provided. Prepare the screws according to the material, structure, strength and other factors of the mounting area and the total weight of objects to be mounted. Ensure that the mounting surface, anchor and screws are sufficiently strong. ⿟ Do not mount this product on a plaster board or a wooden section because they are too weak. If ⿟ this product is unavoidably mounted on such a section, the section shall be sufficiently reinforced. Design and engineer the power supply system to turn on/off the power of this product. The product has no power switch. When installing the product, use a power supply device equipped with the ON-OFF switch for servicing. About the network connection When connecting to a network using the network cable of this product, observe the following. When wiring for the network, design and engineer not to be affected by thunder. Screw tightening The screws and bolts must be tightened with an appropriate tightening torque according to the ⿟ material and strength of the installation area. Do not use an impact driver. Use of an impact driver may damage the screws or cause tighten- ⿟ ing excessively. When a screw is tightened, make the screw at a right angle to the surface. After tightening the ⿟ screws or bolts, perform visual check to ensure tightening is enough and there is no backlash. Procure fixing screws separately. The screws that secure this product are not supplied. Prepare them according to the material and strength of the area where the product is to be installed. Required pull-out capacity of a single screw/bolt is 294 N {66.09 lbf} or more. Fall prevention measures When the external safety wire is connected, select a connection point resulting in that nothing will hit people after the stand is damaged. Do not remove or loosen the internal camera screws. Do not loosen the internal camera screws. Otherwise, water exposure may cause damage or mal- function of camera, or camera dropping may result in injury. Radio disturbance When this product is used near TV/radio antenna, strong electric field or magnetic field (near a motor, a transformer or a power line), images may be distorted and noise sound may be produced. PoE (Power over Ethernet) Use a PoE hub/device that is compliant with IEEE802.3af standard. Router When connecting this product to the Internet, use a broadband router with the port forwarding function (NAT, IP masquerade). Refer to the Operating Instructions (included in the CD-ROM) for fur- ther information about the port forwarding function. Time & date setting It is necessary to set the time & date before putting this product into operation. Refer to the Operating Instructions on the provided CD-ROM for descriptions of how to perform the settings. CPU: Intel ® Core TM 2 Duo 2.4 GHz or faster recommended Memory: 512 MB or more (A minimum of 1 GB memory is required when using Microsoft ® Windows ® 7 or Microsoft ® Windows Vista ®.) Network interface: 10BASE-T/100BASE-TX 1 port Monitor: Image capture size: 1024 x768 pixels or more Color: 24-bit True color or better OS: Microsoft ® Windows ® 7 Microsoft ® Windows Vista ® Microsoft ® Windows ® XP SP3 Web browser: Windows ® Internet Explorer ® 9.0 (32-bit) Windows ® Internet Explorer ® 8.0 (32-bit) Windows ® Internet Explorer ® 7.0 (32-bit) Microsoft ® Internet Explorer ® 6.0 SP3 Others: CD-ROM drive (It is necessary to read the operating instructions and use the software on the provided CD-ROM.) DirectX ® 9.0c or later Adobe ® Reader ® (It is necessary to view PDF file on the provided CD-ROM.) IMPORTANT When using a PC that does not meet the above requirements, displaying of images may ⿟ become slower or the web browser may become inoperable. Microsoft Windows 7 Starter, Microsoft Windows Vista Starter and Microsoft Windows XP ⿟ Professional 64-bit Edition are not supported. When using IPv6 for communication, use Microsoft Windows7 or Microsoft Windows Vista. ⿟ Note Refer to “Notes on Windows ⿟ ®/ Internet Explorer ® versions” (included in the CD-ROM) for further information about system requirements for a PC and precautions when using Microsoft Windows 7, Microsoft Windows Vista or Internet Explorer. ⿟If using Microsoft Windows XP, screen tearing* may occur when the shooting scene drastically changes (for example, while shooting fast-moving subjects) due to the GDI restrictions of the OS. * A phenomenon in which portions of the screen are displayed out of alignment. For information on the operation verification of the supported operating systems and web ⿟ browsers, refer to our website at http://panasonic.net/pss/security/support/index.html. System requirements for a PC Main Unit (1 pc.) Flexible Stand (1 pc.) Connector Cover (1 pc.) Sunshade (1 pc.) Screw A (5 pcs.) Screw B (4 pcs.) Washer S (1 pc.) Washer L (1 pc.) Safety Wire (1 pc.) Self Bonding Tape (1 pc.) Foam Strip (1 pc.) Power cable plug (1 pc.) －+ Installation Guide (this document) ........ (1 pc.) Warranty card (P model) ....................... (1 pc.) CD-ROM* 1 ............................................ (1 pc.) Code label* 2.......................................... (1 pc.) *1 The CD-ROM contains the operating instructions and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label. Installation Guide Network Camera Model No. WV-SW175/WV-SW172 WV-SW175E/WV-SW172E PGQX1099YA Cs1011-1121 Printed in China Main functions ● Corresponding to outdoor use This unit complies with waterproof and is able to install outdoors. (JIS C0920 compliant IP55) ● H.264 and JPEG triple encoding A total of 3 outputs, comprising of 2 H.264 outputs and 1 JPEG output, can be provided. ● Power over Ethernet function When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply connecting a LAN cable. (IEEE802.3af compliant) ● Adaptive darkness correction mode Corrects the blacked-out parts of dark areas of objects that have different illumination intensities. ● Panning/tilting function and preset position function A single camera provides wide area monitoring. ● Interactive communication with audio By using the audio output connector and the microphone in connector, receiving audio from the cameras on a PC and transmitting audio from the PC to the cameras is available. ● SDHC/SD memory card slot equipped It is possible to save H.264 videos and JPEG images on the SDHC/SD memory card manually at an alarm occurrence, during the period of the schedule, or on a web browser. It is also possible to save JPEG images at a network failure occurrence. (Download is possible.) Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of Adobe ⿟ Systems Incorporated in the United States and/or other countries. Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either registered ⿟ trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. ⿟ Intel and Intel Core are trademarks or registered trademarks of Intel Corporation in the United ⿟ States and other countries. iPad, iPhone, and iPod touch are registered trademarks of Apple Inc., registered in the U.S. and ⿟ other countries. All other trademarks identified herein are the property of their respective owners. ⿟ Trademarks and registered trademarks Confirm the following items are included in the camera’s packaging. You will need the following additional items to install and configure the camera. [Locally procured] PoE device (When supplying the power using the PoE device) ⿟ a PC (see the system requirements in the Important Information document) ⿟ a router ⿟ a LAN cable (CAT-5 straight cable) ⿟ AC Adaptor (1 pc.) ⿟ As you will use this unit connected to a network, your attention is called to the following security risks. A Leakage or theft of information through this unit B Use of this unit for illegal operations by persons with malicious intent C Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. Use this unit in a network secured by a firewall, etc. ⿟ ⿟If this unit is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.). Protect your network against unauthorized access by restricting users to those who log in with ⿟ an authorized user name and password. Apply measures such as user authentication to protect your network against leakage or theft of ⿟ information, including image data, authentication information (user names and passwords), alarm mail information, FTP server information and DDNS server information. After the unit is accessed by the administrator, make sure to close the browser. ⿟ Change the administrator password periodically. ⿟ Do not install the camera in locations where the camera or the cables can be destroyed or dam- ⿟ aged by persons with malicious intent. Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Cause/solution Power is not turned on. u Are the PoE device and the network cable of the camera ⿟ connected using a LAN cable? p Check whether the connection is appropriately established. Depending on the PoE device, the power supply will stop ⿟ when the demanded power exceeds its total power limit for all PoE ports. p Refer to the operating instructions of the PoE device in use. Distributing, copying, disassembling, reverse compiling and reverse engineering of the software pro- vided with this product are all expressly prohibited. In addition, exporting any software provided with this product violating export laws is prohibited. Precautions Specifications Limitation of liability Disclaimer of warranty Copyright ● Basic Power source: PoE (IEEE802.3af compliant), 12 V DC Power consumption: PoE: 130 mA (Class 2 device), 12 V DC: 430 mA Ambient operating temperature: -20 °C to +50 °C {-4 °F to 122 °F} Ambient operating humidity: Less than 90 % (no condensation) Monitor output: VBS: 1.0 V [p-p]/75 Ω, composite (BNC), ø3.5 mm mini jack EXT I/O terminal cable: ALARM IN 1, ALARM IN 2/ ALARM OUT, ALARM IN 3/ AUX OUT, GND, 12 V DC Microphone/Line input: For microphone input For line input ø3.5 mm monaural mini jack Input impedance: Approx. 2.2 kΩ Applicable microphone: Plug-in power type Supply voltage: 3.3 V ±0.5 V Input level: Approx. –10 dBV Audio output: ø3.5 mm stereo mini jack (monaural output) Output impedance: Approx. 560 Ω Line level Dustproof/ Waterproof: IP55* * Only when installation work specified in this book is properly per- formed and appropriate waterproof treatment is performed Dimensions: 100 mm (W) x 100 mm (H) x 74 mm (D) {3-47/50 inches (W) x 3-47/50 inches (H) x 2-23/25 inches (D)} (excluding projection) Mass: Main body: 350 g {0.77 lbs} Finish: Main body : PC/ABS resin, silver Dome section: Clear polycarbonate resin ● Camera Image sensor: 1/4 type MOS image sensor Effective pixels: Approx. 1.3 megapixels Scanning area: 3.52 mm (H) × 2.64 mm (V) {7/50 inches (H) × 1/10 inches (V)} Scanning system: Progressive Minimum illumination: Color: 0.6 lx {0.06 footcandle} (F2.2, Auto slow shutter: Off (1/30 s), Gain: On (High)) 0.038 lx {0.0038 footcandle} (F2.2, Auto slow shutter: max. 16/30 s, Gain: On (High))* BW: 0.5 lx {0.05 footcandle} (F2.2, Auto slow shutter: Off (1/30 s), Gain: On (High)) 0.031 lx {0.0031 footcandle} (F2.2, Auto slow shutter: max. 16/30 s, Gain: On (High))* * Converted value Wide dynamic range: On/Off Face WDR: On/Off Gain (AGC): On (Low)/ On (Mid)/ On (High)/ Off Adaptive black stretch: On/Off Light control mode setting: Indoor scene (50Hz/60Hz)/ELC ELC (Maximum exposure time): ELC(1/30 s), ELC(3/100 s), ELC(3/120 s), ELC(2/100 s), ELC(2/120 s), ELC(1/100 s), ELC(1/120 s), ELC(1/250 s), ELC(1/500 s), ELC(1/1000 s), ELC(1/2000 s), ELC(1/4000 s), ELC(1/10000 s) Auto slow shutter: Off (1/30 s), Max. 2/30s, Max. 4/30s, Max. 6/30s, Max. 10/30s, Max. 16/30s Day & Night (electrical): Off/Auto White balance: ATW1/ ATW2/ AWC Digital noise reduction: High/Low Video analytics Face detection: On/Off (with the XML notification setting) Privacy zone: On/Off (up to 2 zones available) Camera title on screen: Up to 20 characters (alphanumeric characters, marks), On/Off Video motion detection (VMD alarm): On/Off, (available at each preset) ● Lens Zoom ratio: Extra zoom: 2x (under VGA resolution) Digital (electronic) zoom: 8x (Max 16x combined with Extra Optical Zoom under VGA) Focal length: 1.95 mm Maximum aperture ratio: 1: 2.2 Focus range: ∞ - 0.5 m Angular field of view: Horizontal: 85°, Vertical: 68° ● Panning/tilting platform Panning range: -47.5°- +47.5° Panning speed: Manual: Approx. 5 °/s - 80 °/s, Preset: Up to approx. 80 °/s Tilting range: -45° to +10° Tilting speed: Manual: Approx. 5 °/s - 80 °/s, Preset: Up to approx. 80 °/s Number of the preset positions: 64 Map shot: Preset map-shot Self return: 10 s/ 20 s/ 30 s/ 1 min/ 2 min/ 3 min/ 5 min/ 10 min/ 20 min/ 30 min/ 60 min Network security WARNING CAUTION Turn the power off when cleaning this product. • Failure to observe this may cause injury. Refer installation work to the dealer. • Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer. • Stop the operation immediately when something is wrong with this product. • When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product has deteriorated, continued use will cause a fire or fall of the product resulting in injury, or damage to the product. Turn the power off immediately and contact qualified service personnel for service. • Select an installation area that can support the total weight. • Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in injury. Installation work shall be started after sufficient reinforcement. • Periodic inspections shall be conducted. • Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents. Consult the dealer for the inspections. • The screws and bolts must be tightened to the specified torque. • Failure to observe this may cause a drop resulting in injury or accidents. Do not install this product in locations subject to vibration. • Loosening of mounting screws or bolts may cause a fall of the product resulting in injury. The measures of protection against a fall of this product shall be taken. • Failure to observe this may cause a drop resulting in injury or accidents. Be sure to install the safety wire. Install this product in a location high enough to avoid people and objects from • bumping the product. Failure to observe this may cause a drop resulting in injury or accidents. Turn the power off when do wiring of this product. • Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire. Do not attempt to disassemble or modify this product. • Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections. Do not insert any foreign objects. • This could permanently damage this product. Turn the power off immediately and contact qualified service personnel for service. Do not use this product in an inflammable atmosphere. • Failure to observe this may cause an explosion resulting in injury. Avoid installing this product in the locations where salt damage occurs or • corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of the product may occur. Do not strike or give a strong shock to this product. • Failure to observe this may cause fire or injury. Do not rub the edges of metal parts with your hand. • Failure to observe this may cause injury. Do not touch this product or the connected cables during thunder. (even in the • process of work) Failure to observe this may cause electric shock. Keep SDHC/SD memory cards (option) away from infants and children. • Otherwise, they may swallow the cards by mistake. In this case, consult a doctor immediately. • ● Network Network: 10BASE-T/100BASE-TX, RJ45 connector Resolution: WV-SW175: Imaging mode: 4:3 H.264 1280x960/ VGA (640x480)/ QVGA (320x240) max.30fps JPEG 1280x960/ VGA (640x480)/ QVGA (320x240) max.30 fps Imaging mode: 16:9 H.264 1280x720/ 640x360/ 320x180 max.30 fps JPEG 1280x720/ 640x360/ 320x180 max.30 fps WV-SW172: Aspect ratio: 4:3 H.264 SVGA(800x600)/ VGA(640x480)/ QVGA(320x240) max. 30 fps JPEG SVGA(800x600)/ VGA(640x480)/ QVGA(320x240) max. 30 fps Aspect ratio: 16:9 H.264 640x360/ 320x180, max. 30 fps JPEG 640x360/ 320x180, max. 30 fps Image compression method: *1 H.264 Image quality: Low/ Normal/ Fine Transmission type: Unicast/Multicast Bit rate: Constant bit rate/ Best effort: 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/ 1024 kbps/ 1536 kbps/ 2048 kbps/ 3072 kbps/ 4096 kbps/ 8192 kbps Frame rate: 1 fps/ 3 fps/ 5 fps/ 7.5 fps/ 10 fps/ 12 fps/ 15 fps/ 20 fps/ 30 fps JPEG Image quality: 0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/ 9 LOW (10 steps: 0-9) Transmission type: PULL/PUSH Transmission interval: 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264/ images.) Audio compression method: G.726 (ADPCM) 32 kbps/ 16 kbps G.711 64 kbps Bandwidth control: Unlimited/ 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/ 1024 kbps/ 2048 kbps/ 4096 kbps/ 8192 kbps Protocol: IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, MLD, ICMP, ARP IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP Maximum concurrent access number: 14 (Depends on network conditions) FTP client: Alarm image transmission, FTP periodic transmission Multi-screen: Up to 16 camera images can be displayed simultaneously on a multi- screen. (Including the camera itself) Compatible SDHC/ SD memory card (option): Manufactured by Panasonic SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) Cellular phone compatibility: JPEG image, panning/tilting/zoom control, AUX control (by access level) Mobile terminal compatibility: iPad, iPhone, iPod touch (iOS 4.2.1 or later) (As of August, 2011) *1 Transmission for 2 streams can be individually set in the same compression method. ● Optional accessories User License Accessory (For H.264) BB-HCA8A (P model) BB-HCA8CE (E model, Korea*) * Required in Korea Troubleshooting Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6) Do not install near any heat sources such as radiators, heat registers, stoves, or other appara- tus (including amplifiers) that produce heat. 7) Only use attachments/accessories specified by the manufacturer. 8) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. S3125A 9) Unplug this apparatus during lightning storms or when unused for long periods of time. 10) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT; (2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER; (3) ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THE MALFUNCTION OR TROUBLE; (4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT; (5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY; (6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA’S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE; (7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE. For U.S. and Canada: Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic System Networks Co., Ltd. 2011 For Europe and other countries: http://panasonic.net Importer’s name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall/ceiling in accor- ⿟ dance with the installation instructions. The installation shall be carried out in accordance with all applicable installation rules. ⿟ The connections should comply with local electrical code. ⿟ For U.S.A This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - spe- cial handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ For U.S. and Canada: WV-SW175/WV-SW172 For Europe and other countries: WV-SW175E/WV-SW172E For Canada This Class A digital apparatus complies with Canadian ICES-003. For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not express- ly approved by the party responsible for compliance could void the user’s authority to operate this equipment. For U.S.A The model number and serial number of this product may be found on the surface of the unit. You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. _________________________________ Serial No. __________________________________ For Europe We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standard or other normative document following the provisions of Directive 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Norm oder normativen Dokument übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2004/108/EC. Nous déclarons sous notre propre responsabilité que le produit auquel se réfère la présente déclaration est conforme á la norme spécifiée ou à tout autre document normatif conformément aux dispositions de la directive 2004/108/CE. Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con la norma u otro documento normativo siguiendo las estipu- laciones de la directiva 2004/108/CE. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme al seguente standard o altro documento normativo conforme alle disposizioni della direttiva 2004/108/CE. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende norm of ander normatief dokument, overeenkomstig de bepalingen van Richtlijn 2004/108/EC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i over- ensstemmelse med standard eller andre normative dokumenter i følgebestemmelserne i direktiv 2004/108/EC. Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument eller annat normativt dokument som framställs i direktiv 2004/108/EC. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavaa standardia tai muuta ohjeellista asiakirjaa, jotka noudattavat direktiivin 2004/108/EC säädöksiä. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overens- stemmelse med følgende norm eller andre normgivende dokumenter som følger bestemmelsene i direktiv 2004/108/EC. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national leg- islation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the envi- ronment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Cd [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. About the user manuals There are 2 sets of operating instructions for the WV-SW175, WV-SW172 (P model), WV-SW175E, WV-SW172E (E model) as follows. Installation Guide: Explains how to install and connect devices, as well as how to connect and ⿟ configure the network. Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how ⿟ to operate this camera. Adobe ® Reader ® is required to read these operating instructions on the provided CD-ROM. When the Adobe ® Reader ® is not installed on the PC, download the latest Adobe Reader from the Adobe web site and install it. “WV-SW175, WV-SW172” or “SW175, SW172” shown in the instructions and illustrations used in these operating instructions indicates the WV-SW175, WV-SW172, WV-SW175E, WV-SW172E. The screens used in these operating instructions show the cases of P models.

Operating Instructions Network Camera Model No. WV-SW390 Series WV-SC380 Series WV-SW170 Series WV-ST160 Series WV-SW175 WV-SW396 This manual covers the models: WV-SW390 Series (WV-SW396, WV-SW395, WV-SW396E, WV-SW395E, WV-SW395R, WV-SW395PJ), WV-SC380 Series (WV-SC386, WV-SC385, WV-SC384, WV-SC386E, WV-SC385E, WV-SC384E, WV-SC385R, WV-SC384R, WV-SC385PJ), WV-SW170 Series (WV-SW175, WV-SW174W, WV-SW172, WV-SW175E, WV-SW174WE, WV-SW172E), and WV-ST160 Series (WV-ST165, WV-ST162, WV-ST165E, WV-ST162E). Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. WV-SW395R, WV-SC385R, and WV-SC384R do not support the HTTPS function.

Mounting the Camera (For UL listed model(s)) The following procedures are descriptions of how to mount the UL listed model(s). ⿟ The sunshade (accessory), front cover, and connector cover (accessory) must be ⿟ installed when used outdoors or in wet locations and positioned so that the sunshade is on top. Pass the cables through the connector cover (accessory), and then connect all cables. Attach the connector cover by fastening screw A (accessory). (Recommended tightening torque of the connector cover: 0.6 N·m {0.44 lbf·ft}) Connect all necessary cables, AC adaptor, LAN, audio/video, etc. IMPORTANT ⿟When wiring LAN cables outside, make the LAN cable as short as possible. This product or the hub connected to this product may be affected by lightning or other weather conditions. When mounting the camera, make sure to wrap the AC adaptor cord (if used) and ⿟ other cables (external microphone or speaker cable, video cable, etc.) around the hooks as shown to ensure secure connections. 1 + － Connector cover (accessory) Connector cover (accessory) Screw hole Screw hole Screw A (accessory) Screw A (accessory) Audio output terminal/ Microphone/line input connector cable hook 12 V DC power supply terminal/ Monitor out connector for adjustment/ External I/O terminals cable hook Attach the sunshade (accessory) by fastening screw A (accessory). (Recommended tightening torque of the sunshade: 0.6 N·m {0.44 lbf·ft}) Make sure the SD card cover close firmly before attaching the sunshade. Screw A (accessory) 2 Sunshade (accessory) Connect the conduit attachment to the conduit and the connector cover. Note The female thread for conduit is compliant with ANSI/NPSM (parallel pipe threads) 3/4 inches or ⿟ G3/4 of ISO 228-1. Conduit attachment (locally procured) Conduit (locally procured) 3 Installing the camera on the ceiling or wall Adjust the camera to a suitable position/direction while confirming the images actually displayed on the computer screen. Note Make sure the live indicator is always in the lower right corner ⿟ when you mount. Place the flexible stand on the ceiling or wall, and determine the mounting position of the stand. Make sure the flexible stand is firmly mounted on a beam of wood (25 mm {31/32 inches} and greater) etc. When there is no beam, apply a board on the other side of the ceiling or wall to make sure the camera does not drop. Secure the safety wire (accessory) to the camera using screw A (accessory) and washer S (accessory). At least 25 mm {31/32 inches} Beam of wood Live indicator Screw A Washer S (accessory) Safety wire (accessory) 1 2 Cs0512-1122 PGQW1223YA Printed in China

Press (1 sec. or less) 本書の記載内容は「⽇本エリア」以外でお使いの場合のものです。 The default setting of the adjustment monitor output terminal is "NTSC". To switch the setting, set the [Monitor out] to "PAL" via the Web browser of the PC. ("Setup" - "Basic" page - [Basic] tab - [Monitor out]) Note: • If PC is not available, the adjustment monitor output terminal can be switched to "PAL" by pressing the [INITIAL SET] button (1 sec. or less) after one minute from power activation. • Turning off and turning on the power again will restore the [Monitor out] setting (default: NTSC). • For the monitor output setting, refer to the Operating Instructions or "New functions and addendum" included in the provided CD-ROM. Le paramètre par défaut du terminal de sortie de moniteur de réglage est "NTSC". Pour commuter le paramétrage, régler [Sortie moniteur vidéo] sur "PAL" par l'intermédiaire du navigateur Internet de l'ordinateur personnel. ("Config." – Page "Base" - onglet [Base] de - [Sortie moniteur vidéo]) Remarque: • Si l'ordinateur personnel n'est pas disponible, le terminal de sortie de moniteur de réglage peut être commuté sur "PAL" en appuyant sur le bouton [INITIAL SET] (1 sec. ou moins) après une minute après le démarrage de l'activation de l'alimentation électrique. • La mise hors tension et la mise sous tension rétablira le paramétrage [Sortie moniteur vidéo] (réglage implicite: NTSC). • Pour le paramétrage de sortie moniteur, se référer au Manuel d'utilisation ou à "Nouvelles fonctions et supplément" inclus sur le disque CD-ROM fourni. Standardmäßig ist die Ausgangsklemme des Einstellmonitors auf "NTSC" eingestellt. Zum Umschalten [Monitor-Ausgang] über den Web-Browser des PC auf "PAL" stellen. ("Setup" - "Allgemeines"-Seite - [Allgemeines]-Register - [Monitor-Ausgang]) Anmerkung: • Ist kein PC verfügbar, so kann die Ausgangsklemme des Einstellmonitors auf "PAL" umgeschaltet werden, indem die [INITIAL SET]-Taste eine Minute nach der Einschaltung gedrückt wird (1 Sek. oder weniger). • Durch Aus- und Wiedereinschalten der Stromversorgung wird [Monitor-Ausgang] auf die Vorgabe (NTSC) zurückgesetzt. • Zu den Monitoreinstellungen siehe die Bedienungsanleitung oder "Neue Funktionen und Nachtrag" auf der mitgelieferten CD-ROM. avs0713-0 PGQWxxxxZA Printed in China Switches the video format of the adjustment monitor to PAL Umschaltung des Einstellmonitors auf das PAL-Videoformat Commutation au format vidéo du moniteur de réglage sur PAL Printed in China Gedruckt in China Imprimé en Chine Impreso en China Stampato in Cina Напечатано в Китае avs1113-0 PGQW1438ZA Impresso na China

Operating Instructions Network Camera Model No. WV-SW390 Series WV-SC380 Series WV-SW170 Series WV-ST160 Series WV-SW175 WV-SW396 This manual covers the models: WV-SW390 Series (WV-SW396A, WV-SW396, WV-SW395A, WV-SW395APJ, WV-SW395, WV-SW396AE, WV-SW396E, WV-SW395AE, WV-SW395E, WV-SW395R, WV-SW395PJ), WV-SC380 Series (WV-SC386, WV-SC385, WV-SC384, WV-SC386E, WV-SC385E, WV-SC384E, WV-SC385R, WV-SC384R, WV-SC385PJ), WV-SW170 Series (WV-SW175, WV-SW174W, WV-SW172, WV-SW175E, WV-SW174WE, WV-SW172E), and WV-ST160 Series (WV-ST165, WV-ST162, WV-ST165E, WV-ST162E). Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. WV-SW395R, WV-SC385R, and WV-SC384R do not support the HTTPS function.