Panasonic WVPS11B - CAMERA DRIVE UNIT Manuals

Camera Drive Unit WV-PS11B Before attempting to connect or operate this product, please read these instructions completely.  WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the pres- ence of uninsulated "dangerous volt- age" within the product's enclosure that may be of sufficient magnitude to con- stitute a risk of electric shock to per- sons. The exclamation point within an equi- lateral triangle is intended to alert the user to the presence of important oper- ating and maintenance (servicing) instructions in the literature accompa- nying the appliance. The serial number of this product may be found on the bot- tom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. WV-PS11B Serial No. Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, i.e., in strict accor- dance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER- VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PER- SONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SA 1965 SA 1966 For U.S.A Caution: Before attempting to connect or operate this prod- uct, please read the label on the bottom. -1- CONTENTS PREFACE ......................................................................................................................................................................... 2 FEATURES ....................................................................................................................................................................... 2 PRECAUTIONS ................................................................................................................................................................ 3 MAJOR OPERATING COMPONENTS AND THEIR FUNCTIONS .................................................................................... 4 CONNECTIONS ............................................................................................................................................................... 5 SPECIFICATIONS ............................................................................................................................................................ 9 -2- PREFACE The Panasonic Camera Drive Unit WV-PS11B is spe- cially designed to drive specified cameras such as WV- BP70 or WV-CP100. This simple system is specially designed for surveil- lance and security needs at offices, factories, schools, hospitals, public or residential buildings, etc. FEATURES • Stable DC power is supplied to the specified cam- era by a regulator in the camera drive unit. • A single coaxial cable connects the specified cam- era and camera input of the camera drive unit. • Three signals, video, DC power and vertical drive pulses, are carried by a single coaxial cable (used with the WV-BP70 or WV-CP100 camera.). • Audio signals can be transmitted from the speci- fied camera to the camera drive unit (used with the WV-CP100 or WV-CF20 camera.). • VD/SYNC input and output connectors for synchro- nizing in the parallel operation. • Built-in protection circuit protects the appliance in case of wrong connection.

Camera Drive Unit WV-PS11B Before attempting to connect or operate this product, please read these instructions completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The serial number of this product may be found on the bot- tom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. The exclamation point within an equilat- eral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruc- tions in the literature accompanying the appliance. For U.K. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead sym- bol, within an equilateral triangle, is interned to alert the user to the pres- ence of uninsulated "dangerous volt- age" within the product's enclosure that may be of sufficient magnitude to con- stitute a risk of electric shock to per- sons. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CARE- FULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amp and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark H or the BSI mark G on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refit- ted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET. If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician. WARNING: This apparatus must be earthed. ENGLISH VERSION -1- IMPORTANT The wires in this mains lead are coloured in accordance with the following code. Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol I or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter L or coloured red. How to replace the fuse Open the fuse compartment with a screwdriver and replace the fuse and fuse cover. THIS APPARATUS MUST BE EARTHED. To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide con- nection to earth. Wrongly wired extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installation is completely safe. For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician. For U.K. For Australia Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende nor- men of andere normatiefve dokumenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 73/23/EEC og 89/336/EEC. Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 73/23/EEC och 89/336/EEC. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ia 89/336/EEC. säädöksiä. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/EEC og 89/336/EEC. We declare under our sole responsibility that the product to which this declaration relates is in conformity with the stan- dards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta con- forme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE/73/23 e CEE/89/336. Caution: Before attempting to connect or operate this product, please read the label on the bottom. -2- PREFACE The Panasonic Camera Drive Unit WV-PS11B is spe- cially designed to drive specified cameras such as WV- BP70 or WV-CP100. This simple system is specially designed for surveil- lance and security needs at offices, factories, schools, hospitals, public or residential buildings, etc. FEATURES • Stable DC power is supplied to the specified cam- era by a regulator in the camera drive unit. • A single coaxial cable connects the specified cam- era and camera input of the camera drive unit. • Three signals, video, DC power and vertical drive pulses, are carried by a single coaxial cable (used with the WV-BP70 or WV-CP100 camera.). • Audio signals can be transmitted from the speci- fied camera to the camera drive unit (used with the WV-CP100 or WV-CF20 camera.). • VD/SYNC input and output connectors for synchro- nizing in the parallel operation. • Built-in protection circuit protects the appliance in case of wrong connection. CONTENTS PREFACE ..................................................................... 2 FEATURES ................................................................... 2 PRECAUTIONS ............................................................ 3 MAJOR OPERATING COMPONENTS AND THEIR FUNCTIONS ............................................. 4 CONNECTIONS ........................................................... 5 SPECIFICATIONS ........................................................ 9