Panasonic WXCC2010 - CENTER MODULE Manuals

2 pdf manual(s) Panasonic WXCC2010 - CENTER MODULE for free download (Document Types: Operating instructions manual)

Document Preview & Text Transcription

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Digital Technology WX-CC2010 TRANSCEIVER MONITOR POWER VEHICLE PRESENT A B WX-CT2020 Model No. WX-CC2010 Series Wireless Communication System Center Module Operating Instructions ENGLISH FRANÇAIS 2 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Warning: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. FCC Warning: This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated with at least 20 cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and legs). FCC Warning: To assure continued FCC emission limit compliance, use only the provided power supply cord and shielded interface cable when connecting this device to the computer. Also, any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. DoC Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Technical Support Party: Panasonic Consumer Electronics Company 1707 N. Randall Rd., Elgin IL. 60123 Technical Support Tel No.: 886-472-6767 WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral tri- angle is intended to alert the user to the pres- ence of important operating and maintenance (servicing) instructions in the literature accom- panying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SA 1965 SA 1966 ATTENTION: A battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Ni-MH A lithium-ion battery that is recyclable powers the prod- uct you have purchased. Please call 1-800-8-BAT- TERY for information on how to recycle this battery. L i - ion CAUTION It is a violation of Federal Law to begin operating this system prior to obtaining an FCC Radio License. The FCC ID number for this radio equipment is listed below. FCC ID: ACJ9TAWX-CC2010Z RSS-210 This device has been designed to operate with an antenna having a maximum gain of –3 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropi- cally radiated power (EIRP) is not more than that required for suc- cessful communication. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The serial number of this product may be found in the bat- tery compartment of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. ENGLISH VERSION 3 IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the points where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-overs. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. S3125A ENGLISH

Document Preview & Text Transcription

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Model No. WX-CC2010 Series Wireless Communication System Center Module Operating Instructions Digital Technology WX-CC2010 TRANSCEIVER MONITOR 1 2 3 4 ULTRAPLEX II POWER VEHICLE PRESENT DNR DNR A B A B WX-CT2020 2 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter- ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Warning: To assure continued FCC emission limit compliance, use only the provided power supply cord and shielded interface cable when connecting this device to the computer. Also, any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America 1707 N. Randall Rd., Elgin IL. 60123 Contact Source: Panasonic Consumer Electronics Company 866-472-6767 WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The lightning flash with arrowhead sym- bol, within an equilateral triangle, is intended to alert the user to the pres- ence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilat- eral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appli- ance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SA 1965 SA 1966 ATTENTION: A battery that is recyclable powers the product you have purchased. Please call 1-800-8-BAT- TERY for information on how to recycle this bat- tery. Ni-MH A lithium-ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. L i - ion CAUTION It is a violation of Federal Law to begin operating this sys- tem prior to obtaining an FCC Radio License. The FCC ID number for this radio equipment is listed below. FCC ID: ACJ9TAWX-CC2010 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The serial number of this product may be found in the bat- tery compartment of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. WX-CC2010 Serial No. 3 IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the points where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-overs. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. S3125A 4 CONTENTS IMPORTANT SAFETY INSTRUCTIONS.........................................................................................................3 PREFACE ......................................................................................................................................................5 PRECAUTIONS .............................................................................................................................................6 PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND ACCESSORIES ..................................................7 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS.......................................................................8 ■ WX-CC2010 Center Module ..................................................................................................................8 ■ WX-CT2030 Transceiver......................................................................................................................13 ■ WX-C516 Power Transformer ..............................................................................................................13 ■ WX-C1027A Headset ..........................................................................................................................13 ■ WX-C550 Speaker Microphone...........................................................................................................13 ■ WX-CT2020 Order Taker Unit..............................................................................................................14 OPERATION MODE DESCRIPTIONS .........................................................................................................16 ■ Operation Mode 1 (Same as WX-C1011 and WX-C1020 System) .....................................................16 ■ Operation Mode 2 (Area Expansion) ..................................................................................................17 ■ Operation Mode 3 (Manager Mode) ..................................................................................................18 ■ Operation Mode 4 (Area Expansion with Manager) ...........................................................................19 ■ Operation Mode 5 (Double Drive Through) ........................................................................................20 ■ Operation Mode 6 (Double Drive Through with Area Expansion) ......................................................21 ■ Operation Mode 7 (Double Drive Through with Manager Mode) .......................................................22 PREPARATIONS .........................................................................................................................................23 ■ Installations and Connections ............................................................................................................23 ■ Battery Charge and Replacement (WX-CH2050/WX-CT2020) ..........................................................23 ■ Setup Procedures (WX-CH2050/WX-CT2020) ...................................................................................23 ■ Preparation .........................................................................................................................................23 ■ Maintenance of Headpad Accessories (WX-C1027A: Non-Scheduled) ............................................24 OPERATING PROCEDURES.......................................................................................................................25 TROUBLESHOOTING .................................................................................................................................25 SPECIFICATIONS........................................................................................................................................26