Paradyne 8968 Manuals

ATM Line Cards Models 8955, 8965, 8968, 8975, and 8985 User’s Guide Document No. 8900-A2-GB20-50 August 2005

8968-A2-GK40-10 June 2004 1 ATM Line Card Model 8968 Firmware Compatibility Notice Document Number 8968-A2-GK40-10 June 2004 Do Not Install This Card Until You Have Checked Firmware Do not install this card into the Broadband Access Concentrator (BAC) until you have verified that you have the proper firmware in your SCP card. To determine the firmware level using the web interface, select System->Firmware. Check the Running Firmware field. The minimum revision of firmware required is:
03.02.25 for Models 8411, 8412, 8413, 8414, 8416, and 8417 (SCP cards with ATM uplinks)
04.00.32 for Model 8429 (SCP card with IP uplink) If your SCP card is at a firmware revision below the revision listed above, an upgrade is required before you can install the 8968 line card. Contact your technical support representative to obtain the latest SCP card firmware. Using the wrong firmware will render the line card inoperable. Once that happens it must be returned to factory for reprogramming. After downloading and switching to a valid firmware release, immediately download at least the minimum firmware level into the alternate firmware bank to prevent an inadvertent switch to the wrong level. Then proceed with the installation of the line card.
 
*8968-A2-GK40-10* Copyright © 2004 Paradyne Corporation. Printed in U.S.A.