Paradyne FrameSaver 9620 Manuals

TM 1 FrameSaver� 9620 Network Access Module (NAM) Installation Instructions Document Number 9621-A2-GN10-10 July 1998 Before You Begin Make sure you have: � A small flat-blade screwdriver. � A small Phillips screwdriver if transferring an ISDN BRI DBM to the replacement NAM (for use in 1-slot housing only), or if installing the NAM in a 9000 Series Access Carrier. � 1-Slot Assembled Access Unit Installation Instructions (Document No. 9000-A2-GN10) to install the 1-slot access unit once the NAM is installed, or � 9000 Series Access Carrier Installation Instructions (Document No. 9000-A2-GN1D) for power-up verification procedures, if using an access carrier. � ISDN BRI Dial Backup Module (DBM) Installation Instructions (Document No. 9000-A2-GN19) to uninstall, then reinstall a DBM if one is currently installed on the NAM being replaced. � Configuration information for the NAM being installed or replaced. If an ISDN BRI DBM is installed on a NAM being replaced, the DBM must be uninstalled, then reinstalled onto the replacement NAM (1-slot housings only). Package Checklist Verify that your package contains the following: � NAM � NAM I/O card, if installing the NAM in an access carrier � Warranty card � Training card � FrameSaver 962x Safety and Regulatory, Warranty and Service Information (Document No. 9621-A2-GX40) � Appropriate cables

AREA CODE CHANGE Please note that the area code for Paradyne Corporation in Largo, Florida has changed from 813 to 727. For any Paradyne telephone number that appears in this manual with an 813 area code, dial 727 instead.