PAX PAX-100 Manuals

Quick-Start Guide Please read the User’s Manual before using the unit 1-888-522-0729 | PAXINNOVATIONS.COM | [email protected] Remove the tank from the unit by pulling the black lock that holds the tank in place, then pull the tank down and towards the front of the unit. You can now fill the tank with the disinfectant of your choice and reinstall it in the PAX-100. Refer to the Safety Data Sheet of the disinfectant of your choice for any protective equipment recommended when handling the product. Ensure that any surface with visible dirt is cleaned prior to using the sprayer to ensure even coverage of the disinfectant. To start the unit, press and hold the button on the handle. A 20- second delay to prime the pump is possible, this is normal operation. Hold the handle firmly while the machine is in operation to ensure optimum performance. Spray the desired surfaces with an “S” shaped sweeping motion. If the disinfectant accumulates on the surfaces, the speed of disinfectant application should be increased. To maximize the life of the PAX-100, it is important to rinse the unit at the end of each day of use. Pour the surplus of disinfectant into its container, then rinse and fill the tank with hot water. Put the tank back in place. Spray hot water for at least 30 seconds into a container or towards a drain. This will prevent the accumulation of residue in the internal components of the PAX- 100, which can cause long-term issues. Empty the tank and reinstall it on the PAX-100. The unit can now be stored until the next disinfection. Although the PAX-100 has an internal battery allowing more than 8 hours of continuous operation, the unit should always be plugged in when stored. WARNING This device can cause electrostatic shocks. This unit has been designed for one-handed use.

PAX-100 USER MANUAL HANDHELD ELECTROSTATIC SPRAYER MANUEL DE L’UTILISATEUR PAX-100 PULVÉRISATEUR ÉLECTROSTATIQUE PORTATIF 1-888-522-0729 | PAXINNOVATIONS.COM | [email protected]