PDL 100SA140 Manuals

INSTALLATION HINTS Product information on this and other PDL products are available on www.pdl.co.nz and www.pdl.com.au PRODUCT WARRANTY / 12 MONTHS The 100SA140 Outdoor Motion Sensor has a 12 month warranty from the date of purchase providing the unit is installed according to these instructions, local wiring regulations and Codes of Practice. This warranty is void on any unit which has been tampered with, damaged by accident, improper operation or incorrect installation. This guarantee is in addition to, and does not in anyway affect the rights under the Consumer Guarantees Act 1993, if the Act applies to the supply of this product and you are not acquiring the product for a business use. If the Act applies and any term is inconsistent with the terms or requirements of the Act that term shall be invalid without affecting the remaining terms of the warranty. Note: Under the CGA 1993, Schneider Electric advises that this product does not contain user serviceable components thus spare parts and repair facilities are not available. In the event of a warranty claim, the product must be returned to the point of purchase or direct to Australia/New Zealand distributors together with the proof of purchase. 100SA140 leaflet.pdf 13 July 2009 BBV1877700 Rev00 Model 100SA140 Installation and Operating Instructions 140o OUTDOOR MOTION SENSOR - IP44 FEATURES • Ideal for security lighting - reacts to intruders, visitors and family by turning the lights ON and OFF automatically. • Motion detection for a range of 12 meters over an angle of 140o • All plastic housing - no earth wire required, ideal for replacing existing outdoor sensors. • Adjustable light level (LUX) and time delay controls. • Can be mounted on a wall or under a soffit using the standard mounting fixture. Can also be mounted on an internal or external corner by using the corner mounting fixture. (Refer mounting instructions). PRINCIPLE OF OPERATION The 100SA140 Passive Infrared Sensor (PIR) is a stand alone motion sensor suitable for automatic switching of security applications in domestic, commercial or industrial premises. When movement of heat source (i.e. person, dog or car) within PIR zone is detected by the sensor, it automatically switches on the light or other connected load. If no further movement is detected the PIR starts timing and will turn off the light after the preset “Time” period. As long as there is movement in the PIR field of view the lighting will stay ON. Any movement of a heat source could cause the sensor to switch the lighting on (including hot air movement) i.e. drafts from an open window or door, air vents close by, cars on the street or movement in the neighbours property. This depends on the angle of the sensor head and the distance from the sensor. PIR FIELD OF VIEW Side Elevation Plan View 1400 Sensor 8m approx 8m approx Ideal direction of movement (greatest sensitivity) Not recommended as a direction of movement Ideal height 2–3.5 metres 12 metres (under ideal conditions) Sensor New Zealand Head Office: PO Box 15 355,New Lynn, Waitakere 0640, New Zealand Telephone +64-9-829 0490, Fax +64-9-829 0491 www.pdl.co.nz 33 - 37 Port Wakefield Rd, Gepps Cross, 5094, South Australia Freephone 1300 20 25 25, Freefax 1300 20 25 56 Telephone +61 8 8269 0511, Fax +61 8 8340 1724 www.pdl.com.au Schneider Electric Industrial New Zealand, Telarc Reg. No. 061 registered to ISO 9001. NATIONAL ACCREDITATION OF CERTIFICATION BODIES ISO 9001 CERT NO. 11595 QUALITY ASSESSED PDL Electrical Products are manufactured by ISO 9001 REGISTERED AIM SENSOR ACROSS, NOT ALONG THE PATH PROTECT FROM RAIN DON'T AIM AT THE SUN AIM SENSOR DOWN TO REDUCE DISTANCE AIM AWAY FROM MOVING OBJECTS KEEP AWAY FROM AIR VENTS DON'T MOUNT ABOVE LAMPS AVOID REFLECTED LIGHT FROM BRIGHT SURFACES (ie: mirror windows) MOUNT THE SENSOR LEVEL SPECIFICATIONS AC Supply 230/240V 50Hz Detection Range 140∞ circular, 8m dia at 2.5m height. Operating Temp -20oC ~ 40oC Timer 4 sec. ~ 30 min adjustable LUX 2 Lux ~2000 Lux adjustable. Protection IP44 Weather Protection when correctly installed. Switching/Load Capacity: Incandescent 1000W Halogen 1000W Fluorescent 500W Compact Fluorescent 100W Motor 100W TROUBLE SHOOTING GUIDE PROBLEM Lights won't come on. Lights stay on. Lights keep turning on and off (cycling). Sensing angle and distance appear incorrect CAUSE Power not on. Wired incorrectly. Bulbs blown. PIR not detecting your movement. Light conditions too bright. "Time" set to high. Wired incorrectly. Frequent changes in heat are being detected. Changes in heat are being detected from a fixed heat source. Changes in heat are being detected from a moving object. Light and heat is being reflected back onto the sensor. Sudden temperature changes due to storms or high winds Angle of sensor head pointing down too far. POSSIBLE SOLUTION Turn on indoor switch or check fuse. Check wiring is the same as diagram. Check the bulb still functions or replace. Adjust the angle/direction of the PIR.For best results walk across the beam. Wait until light conditions are duller or adjust the LUX control up. Turn knob to lower setting (4 sec to 30 min adjustable). Check wiring as per the diagram Check sensing area for possible heat sources i.e. air vents, moving vehicles, moving trees, and reposition the sensor. Check the sensing area for air vents, light fittings or fans and either reposition the sensor or adjust the aim. Check the sensing area for moving vehicles, pedestrians, animals, moving trees and alter the aim of the sensor. Alter aim of the sensor or paint the reflecting surface with a dull finish. Turn sensor off until storm passes or install in a sheltered location. Raise the sensor head to increase the sensing distance and angle.