Pentax Optio WG-1 GPS Gray Manuals

Utilities Guide for GPS Before using GPS .......................................2 Using the GPS .............................................4 This manual describes how to use the Optio WG-1 GPS camera’s GPS function and precautions when using it. Please read this manual before using the GPS function with this camera. 53209 H01-201102 Printed in Vietnam 㧙 2 㧙 Before using GPS GPS means Global Positioning System. It is a navigation system for measuring a position by receiving information from GPS satellites. The camera receives signals from some GPS satellites and calculates its present position and the time. This is called "positioning". Location of where an image is taken can be recorded The latitude and longitude of an image can be recorded. You can see the positions of pictures you take on a map by using the software provided. Saving log files The camera receives information from GPS satellites regularly and saves them as log files in KML format. The log files can be displayed using Google Earth or Google Maps, or an application that supports KML format. *Google, Google Earth and Google Maps are trademarks of Google Inc. Correct the clock using GPS data The camera corrects its clock automatically using received information from GPS satellites. • The GPS function is set to off as the default. To use it, set [GPS Setting] to O (On). • GPS satellites always move. Depending on the situation (location, time etc.), positioning may take longer or be impossible. • To use the GPS function, you must be in an open area, such as out of doors. • Positioning may be difficult or impossible in the following situations: - Under the water - Under the ground or indoors - In tunnels - Among high-rise buildings - Under elevated or near high-voltage electrical power lines About GPS Function of Optio WG-1 GPS Precautions for using GPS 㧙 3 㧙 - In the woods - Near mobile phones that use the 1.5 GHz band • When the GPS function is set to on, the camera performs positioning regularly even if it is turned off. Make sure to set [GPS Setting] to P (Off) (p.4) before turning off the camera when taking it where using electronic products is prohibited, such as hospitals or airplanes. • Positioning may take few minutes when using the GPS function for the first time, after not positioning for a long while, or after changing the battery. • The Geodetic system for this camera’s GPS function uses the World Geodetic System 1984 (WGS 84). • The location information on images cannot be erased. Make sure to set [GPS Setting] to P (Off) before taking pictures if you intend to put them on the internet without disclosing their location. • Using GPS is prohibited in some countries or regions. Contact appropriate embassy or travel agent before travelling with a GPS camera. • Do not carry the camera in a metal container if the positioning function is running. If the camera is covered with metal, the positioning function cannot work. • In the following situations, the camera cannot receive GPS data. It starts positioning again if it is removed from the following situations: - While recording an image or a movie - During a slideshow or while playing back a movie - While doing settings on the camera’s setting menu - When the alarm is ringing - When the camera is connected to a computer with a USB cable - When the camera is connected to AV equipment with an AV or HDMI cable - For a minute after changing the battery Hereby, HOYA CORPORATION, declares that this GPS Module Circuit Board/SG561_TB1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For a full version of the Declaration of Conformity (DoC), please refer to http://www.pentax.jp/english/. The CE Mark is a Directive conformity mark of the European Union. 㧙 4 㧙 Using the GPS You can record GPS data (latitude, longitude, altitude, or date etc.) onto images you take. To record them, set [GPS Setting] to O (On). Set [GPS Setting] to O (On) before setting [Logging] (p.5) and [Auto Time Synch.] (p.7) settings. 1 Press the 3 button in Q mode. [WSetting] menu appears. When you press the 3 button in A mode, press the four-way controller (5) once. 2 Use the four-way controller (23) to select [GPS]. 3 Press the four-way controller (5). [GPS] screen appears. 4 Use the four-way controller (23) to select [GPS Setting]. 5 Use the four-way controller (45) to switch between O (On) or P (Off). O(On) Records GPS information onto images P (Off) Does not record GPS information onto images 6 Press the 3 button twice. The camera returns to A mode or Q mode. Recording GPS data onto images • Only when is displayed on the capture mode screen, the GPS information can be recorded onto images. • If [GPS Setting] is set to O (On), the camera performs positioning regularly even if it is turned off, which reduces the battery life. MENU Logging GPS Setting GPS Auto Time Synch. Off Off GPS GPS GPS 㧙 5 㧙 1 Press the Q button after taking a picture. The camera enters the Q mode and the image appears on the display. 2 Press the 4 button until the GPS information is displayed. If the camera did not receive GPS data when the picture was taken, the values are displayed as “--“. The camera receives information from GPS satellites regularly and saves them as log files. These logs are saved in KML format to the "GPSLOG" folder in the root directory which is on the removable disk of the camera. 1 Press the 3 button in Q mode. [WSetting] menu appears. When you press the 3 button in A mode, press the four-way controller (5) once. • When recording GPS information onto a movie, the data at the start of recording is saved. • When dividing a movie, the GPS information before dividing is displayed. • When adding a title image to a movie, the GPS information of the movie is displayed. • The followings are the intervals at which GPS information is received. • When [Logging] is set to [Off] and the camera is turned on: 1 minute • When [Logging] is set to [Off] and the camera is turned off: 15 minutes • When setting the interval in [Logging]: Receives the information at the set interval To display the GPS data saved on an image Saving logs Edit 100 100-0038 0038 100-0038 139 139 139 35 35 35 41' 29" 41' 29" 41' 29" N W 45' 52" 45' 52" 45' 52" 02/02/'11 02/02/'11 02/02/'11 114: 25: 00 14: 25: 00 GPS GPS GPS Latitude and longitude at which image was taken Date image was taken 㧙 6 㧙 2 Use the four-way controller (23) to select [GPS]. 3 Press the four-way controller (5). [GPS] screen appears. 4 Use the four-way controller (23) to select [Logging]. 5 Press the four-way controller (5). A pull-down menu appears. 6 Use the four-way controller (23) to select the interval for positioning. Choose from [Off], [15sec.], [30sec.], or [1min.] 7 Press the 4 button. The setting is saved. • [Logging] can be set only when [GPS Setting] is set to O (On). • The logs are saved in the SD Memory Card only. • Up to 999 log files can be saved or to the capacity of the SD Memory Card. • A new log file is created in the following situations: • When the date changes • When the capacity of a log file is full • After changing an SD Memory Card • When changing the display format of the date • When the battery level icon is red, logging stops. • When setting the interval in [Logging], the camera performs positioning regularly even if it is turned off, which reduces the battery life. • Before changing the battery, set [Logging] to [Off]. MENU Logging GPS Setting GPS Auto Time Synch. Off Off Logging GPS Setting GPS Auto Time Synch. 15sec. Off 30sec. 1min. OK OK MENU Cancel 㧙 7 㧙 If 999 log files are saved, the camera cannot save them anymore. Insert a new SD Memory Card or delete logs according to the following procedures to save new ones. 1 Turn on the camera. [No more logs can be recorded. Delete the record?] message is displayed. 2 Use the four-way controller (23) to select [Delete All]. 3 Press the 4 button. All the logs are deleted and the camera returns to capture mode. The camera corrects its clock automatically using received GPS information. 1 Press the 3 button in Q mode. [WSetting] menu appears. When you press the 3 button in A mode, press the four-way controller (5) once. • The information saved in logs are latitude, longitude, and altitude. • The logs cannot be played back on the camera. Transfer the logs to your computer and use software that supports files in the KML format, Google Earth or Google Maps, for example. To delete logs If you select [Cancel], you can continue taking pictures although you cannot save logs. If you turn on the camera in the Playback Mode, the camera returns to Playback Mode after you have deleted logs. Correcting time automatically No more logs No more logs can be recorded. can be recorded. Delete the record? Delete the record? No more logs can be recorded. Delete the record? OK OK OK OK OK OK Delete All Cancel 㧙 8 㧙 2 Use the four-way controller (23) to select [GPS]. 3 Press the four-way controller (5). [GPS] screen appears. 4 Use the four-way controller (23) to select [Auto Time Synch.]. 5 Press the four-way controller (5). The setting of [World Time] is displayed. 6 Use the four-way controller (45) to switch between [On] and [Off]. 7 Press the 4 button. Returns to [GPS] screen. 8 Press the 3 button twice. The camera returns to A mode or Q mode. • [Auto Time Synch.] can be set only when [GPS Setting] is set to O (On). • [Auto Time Synch.] does not function in the following situations: • During movie recording • During movie play back • When displaying a slide show • During interval shooting • When the timer is set MENU Logging GPS Setting GPS Auto Time Synch. Off Off Applies auto time synch. to current setting New York Destination 02/02/2011 01:25 TimeDif. -14:00 Off DST OFF OFF OFF OK OK MENU Cancel

22 11 MENU Cancel Date Adjustment Date Format mm/dd/yy 24h Date Time 01/01/2011 00:00 Settings complete OK OK MENU Cancel Date Adjustment Date Format mm/dd/yy 24h Date Time 01/01/2011 00:00 Settings complete MENU Cancel City DST New York Hometown OK OK MENU Cancel Initial Setting Hometown New York Settings complete English DST OFF OFF OFF MENU Cancel Initial Setting Hometown New York Settings complete English DST OFF OFF OFF MENU OK Cancel OK 38 P 14:25 14:25 '11/02/02 '11/02/02 '11/02/02 14:25 +1.0 1/250 F3.5 DATE GPS GPS GPS Names of Parts and Monitor Indicators Checking the Contents of the Package Preparing the Camera for Use Turning the Camera On In this Quick Guide, the arrow keys to be pressed are indicated as shown on the right. Check that your camera comes complete with the items listed below. Macro stand (O-MS1) Strap (O-ST104) Operating Manual Utilities Guide for GPS (WG-1 GPS only) Quick Guide (this guide) Carabiner strap (O-ST117/O-ST118) Battery charger (D-BC92) AC plug cord Rechargeable lithium-ion battery (D-LI92) AV cable (I-AVC7) USB cable (I-USB7) Software (CD-ROM) S-SW117 Camera (Optio WG-1 GPS / Optio WG-1) The Optio WG-1 GPS / Optio WG-1 is waterproof, dustproof, and shockproof, as shown below, so you can use it in a wide range of outdoor activities. Waterproof/dustproof: JIS grade 8 waterproof and grade 6 dustproof (IP68) Shockproof: Satisfies Pentax drop test (1.5 m height onto a 5 cm thick plywood surface) complying with MIL- Standard 810F Method 516.5-Shock testing. * Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit. * The camera is not guaranteed to be free of trouble or damage under every condition. Battery Level Indicator You can check the battery level by the indicator on the display. Battery Status Adequate power remains. Battery is running low. Battery is running very low. Battery is exhausted. The camera turns off after this message appears. Screen Display (green) (green) (yellow) (red) [Battery depleted] Front Back Prepare your camera for use before you begin using it. Attach the carabiner strap supplied with the camera as shown in the illustration. Install the battery and SD Memory Card as shown in the illustration. Installing the Battery and SD Memory Card Attaching the Carabiner Strap * The SD Memory Card is sold separately. The inside of the battery/card and terminal covers are not waterproof In locations where the camera is exposed to water or dirt such as underwater, at the beach, in a kitchen, etc., make sure that the battery/card and terminal cover lock levers are firmly locked so that they won't open unexpectedly. Do not open the covers in such locations. When removing the battery or card, avoid surroundings where the camera may be exposed to water or dirt, and make sure the camera, battery, card, and your hands are completely dry. Thank you for purchasing this PENTAX digital camera. Shooting mode Flash mode Face Detection Drive mode Focus mode Digital zoom icon Positioning status Memory status Built-in memory (without card) SD Memory Card Card is write-protected Focus frame Date and time Date imprint setting Eye-Fi communication status World Time setting Camera shake reduction Aperture D-Range Setting Remaining image storage capacity EV compensation Normal display in the Still Picture Capture Mode : No icon Hometown : Destination Shutter speed Battery level Monitor Indicators Following indicators are displayed in the still picture capture mode. Press the power switch. 3 Continue on the reverse side. 12 Press the four-way controller (5) to select [01] (month), [01] (day) or [2011] (year), then use the four-way controller (23) to set the current date and time. 11 Press the four-way controller (5), then press the four-way controller (3) to move the frame to [Date]. 10 Use the four-way controller (45) to choose a city. 5 Press the four-way controller (3) to move the frame to [W Hometown]. Press the four-way controller (5) to select [24h], then use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display). Press the four-way controller (3) to move the frame to [DST] (Daylight Saving Time). 6 Use the four-way controller (45) to select O or P and press the 4 button. The [Initial Setting] screen reappears. 7 Press the four-way controller (3) to select [Settings complete] and press the 4 button. The [Date Adjustment] screen appears. 8 Press the four-way controller (5). The [W Hometown] screen appears. 4 13 Press the four-way controller (5), then press the four-way controller (3) to move the frame to [Time]. 14 Set the time in the same manner as in . 15 12 Make the Initial Settings. 2 Use the four-way controller (2345) to select the desired language. The [Language/ ] screen appears when the camera is turned on for the first time. Select the desired language and then set the date and time. The camera turns on and is ready to take still pictures. Press the power switch again to turn the camera off. Memo If you accidentally select the wrong language and press the 4 button, press the four-way controller (5), use the four-way controller (2345) to select the desired language, and then press the 4 button. The [Initial Setting] screen appears in the selected language. 1 Press the 4 button. The [Initial Setting] screen appears. Press the four-way controller (3) to select [Settings complete] and press the 4 button. 9 Press the four-way controller (5) to select [mm/dd/yy], then use the four-way controller (23) to choose the date format. Formatting an SD Memory Card Use this camera to format (initialize) an SD Memory Card that is unused or has been used on another camera or digital device. Be aware that formatting will delete all the data stored in the SD Memory Card. For how to format an SD Memory Card, refer to the Operating Manual (p. 230). Flash Speaker/Microphone Lens Remote control receiver Macro light Shutter release button Self timer lamp/ Focus assist Power switch/Power lamp (green) Battery/card cover lock lever Display Terminal cover Terminal cover lock lever Battery/card cover PC/AV terminal HDMI terminal Battery lock lever Tripod socket Battery/card cover lock lever SD Memory Card Battery Battery/ card cover Battery lock lever SD Memory Card socket 2 3 5 4

Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera.