Philips SNA6500/00 Manuals

1 1. Select a location for your Philips ADSL Wireless Base Station Install the ADSL Wireless Base Station near your PC or another location where you have easy access. Keep ethernet cables away from power cords and other sources of electrical interfer- ence. Place the ADSL Wireless Base Station, with the antenna in upright position, in a location where air can circulate freely around it. 2. Plug the Power Supply into an appropriate electrical outlet Connect the other end to the Power Input on the back side of the ADSL Wireless Base Station. The LED light (PWR) should come on solid green. 3. Connect the ADSL Wireless Base Station to your ADSL RJ11 wall jack Plug one end of the black RJ-11 Telephone Cable into the port labeled “ADSL” on the ADSL Wireless Base Station back panel until you feel it click. Insert the other end of the telephone cable into the telephone jack (or filter/ splitter) connected to your ADSL service. The ADSL light should blink for up to two minutes and then come on solid green. 4. Connect the Wireless Basestation + ADSL Modem to your computer Connect one end of the RJ-45 Ethernet Cable to your PC’s Ethernet port and the other end to one of the LAN ports of the ADSL Wireless Base Station.The LAN indicator light should come on solid green for the port where you connected your Ethernet cable. Note: Users with an existing Wi-Fi network should preform the inital installation process using the provided ethernet cable. SNA6500 Rear View Connect each computer or other device in your network to the ADSL Wireless Base Station with an Ethernet cable or wirelessly. 2 2. "Getting Started" Follow the instructions on the screen and click the NEXT button. 3. "Wireless settings" For easy installation keep the default wireless settings. If you later would like to change any of the wireless settings you can do so via the menu in the ADSL Wireless Base Station. 4. "ADSL settings" In step 3 you have to enter the settings supplied to you by your ADSL Internet Service Provider (ISP). For easy installation you can select your ISP from a list of predefined ADSL ISP's per country. If you cannot find your ISP in the list yo can enter the settings manually.To do so select as 'Country' 'others' and select from the 'Internet Service Provider' list the ADSL protocol your ISP is using (this should be mentioned in the documentation you received from your ISP). 5. "Confirm" Make sure the information you entered is correct. If you want to make changes, click the 'Back' button to go back to Step 3. After you've clicked "SAVE SETTINGS" message will appear "Your data is being saved". 6. "Connection Status" Step 5 shows if you have a working Internet connection or not. If you have connection you will see the following message Insert Installation CD Place the installation CD in the CD-Drive Agree License Agreement Click Agree If this screen does not appear, start the CD manually • Open My Computer • Open CD-Drive • Open Setup.exe Select Wireless Base Station Click on the SNA6500 image Start installation software Click on Install software Connect Install

SNA6500 User Manual 1 EN VERSION 1.0