Philips TP2781C Manuals

QUICK USE AND INSTALLATION GUIDE TABLE OF CONTENTS Getting Started Warning/Precautions..................................1 Hooking Up Your TV ................................1 How to Use the “INSTALL” Controls ..................2-3 Using the Language Control......................................2 Setting the TV to Auto Program Channels................2 Setting the TV for a Cable or Antenna Signal...........2 Using the Adding and Deleting Channels .................3 Setting the Channel Name Control............................3 How to use the Smart Clock control .........................3 Basic TV and Remote Control Operation .................4 12 1 2 3 4 5 6 7 8 9 10 11 • For details on product registration, warranty, and service refer to the other literature included with your TV information packet. Please retain all these materials and keep them handy for future reference. ANT "A" 75 L AUDIO R/MONO IN-2 IN-1 OUT VIDEO S-VIDEO ANT "A" 75 2 IN OUT 1 Y our Cable TV input into your home may be a single (75 ohm) cable, or a Converter Box installa- tion. In either case the connection to the TV is very easy. Just put the threaded end of the cable signal to the TV's antenna plug and screw it down tight. CABLE TV CABLE INPUT/CONVERTER ANT "A" 75 L AUDIO R/MONO IN-2 IN-1 OUT VIDEO S-VIDEO ANT "A" 75 2 OR OUT TO TV IN FROM ANT. 1 T he basic Antenna, or Cable TV, to VCR to TV connection is shown to the right. For more infor- mation on other hookups (possible when Cable Converter/Descrambler boxes are included) refer to your accessory VCR and Cable Converter Owner's Manual for details. VCR TO TV BASIC CONNECTION If your Cable TV sig- nal is a single round cable (75 ohm) then you're ready to con- nect to the TV. If you have a Cable TV Converter Box: Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter. Connect the Cable TV cable to the ANTENNA (ANT “A”) plug on the TV. If you have a Cable TV Converter Box: Connect the OUT(put) plug from the Converter to the ANTENNA (ANT “A”) plug on the TV (connecting cable sup- plied with the Converter.) BEGIN Connect your Antenna or Cable TV signal to the IN FROM ANT(enna) plug on the VCR. Connect the OUT TO TV plug on the VCR to the ANTENNA (ANT “A”) plug on the TV (connecting cable supplied with the VCR.) BEGIN Back of TV Round Cable 75ΩOhm Cable TV Converter Box Connection Cable TV Company Remember, set the TV for the type signal you've just connected (see “INSTALL” page 2 of this Set-Up Guide.) Your TV can set itself to select only the channel numbers on your Cable sys- tem (see “AUTO PROGRAM" page 2). If you use a Cable Converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the rear of the converter.) SMART HELP Cable TV Signal Round Cable 75ΩSupplied with VCR VCR Outdoor VHF/UHF Antenna 300 to 75ΩOhm Adapter Cable TV signal Back of TV Refer to the Owner's Manual included with your VCR for other possible con- nections and TV/VCR operat- ing details. OR ANT "A" 75 L AUDIO R/MONO IN-2 IN-1 OUT VIDEO S-VIDEO ANT "A" 75 2 1 A combination (outdoor or indoor) antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). Your con- nection to such an antenna is easy since there is only one antenna plug (75Ω- ohm) on the back of your TV - and that’s where the antenna goes. ANTENNA OUTDOOR/INDOOR Remember, be sure to set the TV for the type sig- nal you've connect- ed (see "INSTALL" on page 2 of this Guide.) To order any optional accessory contact your dealer or call the toll-free accessory ordering number: 1-800-851-8885 SMART HELP If your antenna has a round cable connector (75 ohm) on the end, then you're ready to connect it to the TV. If your antenna has flat twin- lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter. Push the round end of the adapter (or antenna) onto the ANTENNA (ANT “A”) plug on the rear of the TV. If the round end of the antenna wire is threaded, screw it down tight. 300 to 75Ω Adapter (483521827003) Twin Lead Wire Back of TV BEGIN WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE. Note: For homes with separate UHF and VHF anten- nas you will need an optional combiner to connect to the TV. VHFVVHF UHF 300Ω 75-300 Ω ADAPTER OR ANT "A" 75 L AUDIO R/MONO IN-2 IN-1 OUT VIDEO S-VIDEO U/V Combiner 75-300 Ohm Adapter Round Cable 75ΩOhm Combination VHF/UHF Antenna (Outdoor or Indoor) Back of TV OR Color Television and Remote Control NOTE: This Quick Use Guide may be used with other models. Some of the features listed may or maynot apply to your TV.

DFU TP2781 TP3281 TP3681