Phonak Roger Pen Manuals

This product may be purchased from Connevans Limited secure online store at www.DeafEquipment.co.uk DeafEquipment.co.uk Offering you choice Helping you choose Connevans.info Solutions to improve the quality of life

How to Connect with Roger Pen and EasyPen General Operation Device Description 1. On/Off/Mute 2. Connect 3. Indicator light (LED) 4. Microphone 5. Charging and audio input (micro-USB) 6. Slot for Roger Pen/EasyPen 7. Audio input (3.5mm/1/8 inch jack) 8. Charging input (micro-USB) • To switch on, press the On/Off button on the side of the Roger Pen/EasyPen for 3 seconds. • To switch off, press the press the On/Off button on the side of the Roger Pen/EasyPen for 3 seconds. • To connect, hold your Roger Pen/EasyPen close (within 10 cm/4 inches) from the Roger receiver. Then, press the connect button on your Roger Pen/EasyPen. • When charging with the supplied USB power cord, the indicator light will shine solid green when fully charged. 2 1 3 4 5 6 8 7

Patient Information Phonak Roger Information Sheet What is the Roger Pen? The Roger Pen is a premium wireless microphone manufactured by Phonak. It connects to your hearing aids to provide better hearing over distances, in noisy environments and when there is more than one person to listen to. The Roger Pen is recommended for listening situations for people who are often on their feet and moving around. You can also use the Roger Pen to stream sound from your mobile phone, MP3 player and TV. How does it work? There are three ways of using the Roger Pen for improved communication: 1. Conference mode: by placing the Roger Pen horizontally on a flat surface, the microphone behaves in an omni-directional mode, picking up sound from all around you. 2. Interview style: Hold the Roger Pen in your hand and point it discreetly towards the person you want to listen to. The intelligent microphone will focus on that single voice to help you hear them better over background noise and over distance. 3. Around the neck: if you are only listening to one person, for example a friend over the dinner table in a restaurant, then they can wear the Roger Pen around their neck so the microphone focuses directly on their voice. What is the maximum distance the Roger pen will work over? In a reverberating environment, the Roger microphone will show a signal to noise ratio benefit over a distance of up to 15-30 metres. How can I listen to my TV with the Roger pen? At home, it is best to plug your battery charging docking station into a port in the back of your TV to allow wireless connectivity to your television. At a friend’s house, you can place your Roger pen next to the loudspeaker on their TV to help you to hear well. This solution will never be as high quality as at home with the docking station directly connected to your TV.

Roger Pen 1.1 Quick setup guide / Schnellstartanleitung Guide d’installation rapide / Stručný návod na použitie

Quick setup guide / Schnellstartanleitung Guide d’installation rapide / Guía rápida de instalación Roger Pen

How to Perform a Hearing Aid Listening Check Using an Advanced Bionics Cochlear Implant 1. Pair a Roger system receiver with your Advanced Bionics cochlear implant processor. a. If you are using the Naida sound processor, you can do this by pairing a Roger X receiver to the base of your Phonak Compilot. b. For any Advanced Bionics sound processor (including Harmony and Neptune), you have the option of using a Roger MyLink receiver. Change to your telecoil or microphone + telecoil program. Put the neckloop around your neck. Switch the Roger MyLink to the “on” position. 2. Pair your receiver to a Phonak Roger Pen. Hold the Roger Pen close to the receiver, then press the “connect” button until you hear a beep. After you hear the beep, your Roger Pen and receiver are paired.

MED-EL 2645 Meridian Parkway | Suite 100 | Durham, NC 27713 USA: [email protected] CANADA: [email protected] 27409 r1.0 Turn On/Off Roger Pen Hold down 2 seconds until green light (on) or red light (off) appears. While Roger Pen is on, it will continue to blink green. Syncing with Roger ™ Receivers Hold this button down with receiver (Roger X, Roger 21, or Roger MyLink) no more than 5" away. Light on Roger Pen will flash blue one time, then green to indicate it issynced. The user will hear a confirmation tone if they are syncing while "on-air." Changing Microphone Modes Press to change to different mic modes: 0. Automatic (default) 1. Interview 2. Conference 3. Lanyard To Mute Roger Pen Just quickly tap the power button. Indicator light will turn violet. To un-mute, tap it again and the light will blink green again. Pairing Roger Pen to Your Phone In your phone, make sure the Bluetooth setting is ON and your Roger Pen is ON. Press green "answer" phone icon until blue light appears, then green light, then blinking blue. (approx. 8 seconds) Select Roger Pen option from list of devices. (If there are multiple devices already paired with phone, you may have to scroll down the list to reveal the Roger Pen that is being paired.) Turning On Bluetooth on Roger Pen Press and hold green "answer" phone icon for 2 seconds. Blue light will glow, then return to blinking green light. (Bluetooth will remain active even when the Roger Pen is off - and still blink blue. Turning Off Bluetooth on Roger Pen Make sure Roger Pen is ON (blinking green). Press red "end call" phone icon until blue light fades. (approx. 3 seconds) SONNET with Roger X Image courtesy of Phonak SONNET with Roger 21 Troubleshooting Tips If you attach a receiver to your processor and it is not connecting with the Roger Pen: – While the Roger Pen is on, simply remove the receiver completely and then connect back to the processor. OR – Re-sync the Roger Pen with the receiver as instructed above. Roger™ is a registered trademark of Phonak. Please consult the respective user manuals for official documentation and usage. Using Roger ™ Pen ™ QUICK TIPS

MED-EL 2645 Meridian Parkway | Suite 100 | Durham, NC 27713 USA: [email protected] CANADA: [email protected] 27714 r1.0 Turn On/Off Roger Pen Hold down 2 seconds until green light (on) or red light (off) appears. While Roger Pen is on, it will continue to blink green. Syncing with Roger MyLink Receiver Hold this button down with Roger MyLink receiver no more than 5" away. (The Roger MyLink must be turned on before this step.) Light on Roger Pen will flash blue one time, then green to indicate it is synced. The user will hear a confirmation tone if they are syncing while "on-air." Changing Microphone Modes Press to change to different mic modes: 0. Automatic (default) 1. Interview 2. Conference 3. Lanyard To Mute Roger Pen Just quickly tap the power button. Indicator light will turn violet. To un-mute, tap it again and the light will blink green again. Pairing Roger Pen to Your Phone In your phone, make sure the Bluetooth setting is ON and your Roger Pen is ON. Press green "answer" phone icon until blue light appears, then green light, then blinking blue. (approx. 8 seconds) Select Roger Pen option from list of devices. (If there are multiple devices already paired with phone, you may have to scroll down the list to reveal the Roger Pen that is being paired.) Turning On Bluetooth on Roger Pen Press and hold green "answer" phone icon for 2 seconds. Blue light will glow, then return to blinking green light. (Bluetooth will remain active even when the Roger Pen is off - and still blink blue. Turning Off Bluetooth on Roger Pen Make sure Roger Pen is ON (blinking green). Press red "end call" phone icon until blue light fades. (approx. 3 seconds) Image courtesy of Phonak USING Roger MyLink receiver: Simply turn on your Roger MyLink and use its volume controls. After syncing your Roger MyLink to the Roger Pen, you must select a telecoil setting on your remote (T or MT) to hear the audio from the Roger Pen. The Roger MyLink features a telecoil neckloop that is worn around your neck. Roger™ is a registered trademark of Phonak. Please consult the respective user manuals for official documentation and usage. Using Roger ™Pen ™ QUICK TIPS with Roger TM MyLink Roger MyLink telecoil neckloop ON/OFF VOLUME

www.phonak.com/phonak-roger 029-0267-02/V1.00/2013-08/A+W Printed in Vietnam © Phonak AG All rights reserved Manufacturer: Phonak Communications AG Laenggasse 17 CH-3280 Murten Switzerland EU Representative: Phonak GmbH D-70736 Fellbach-Oeffingen Germany